• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Matt_Rapp

  1. M

    6950/6970 Eyfinity Problems...

    Wow, I swapped the cables and it works, looks like only the top DVI port can do VGA.
  2. M

    6950/6970 Eyfinity Problems...

    Did you use Display Port or HDMI then?
  3. M

    6950/6970 Eyfinity Problems...

    I just got a new 6950, I've reflashed it be a 6970, to replace my crossfired 5770's. I have a 1920x1200 DVI main monitor with a old VGA panel as a secondary monitor. I can not get the card/driver to discover the VGA panel. I am using a DVI to VGA adapter, I actually have two, one provided with...
  4. M

    Post your Corsair Obsidian 800D Pics here!

    Haz, what is the Bitspower blue panel down on the lower HDD rails?
  5. M

    To Much On One Loop/Pump?

    I am going to water cool my current rig this summer once I have the $$$ and I plan on using these WC parts in an 930 + dual crossfire set up with 1/2" tubing and Bitspower fittings. 1 Danger Den/Laing DDC 3.25 -12V 18 Watt Version 1 Alphacool Laing DDC Clear Acrylic Top 1 Swiftech Apogee...
  6. M

    Post your Corsair Obsidian 800D Pics here!

    Wow that was a quick response. Are you having any problems with different flow rates when the CPU loop splits? Have fun with Crysis!
  7. M

    Post your Corsair Obsidian 800D Pics here!

    I never thought I would see someone fill an entire 800D. Well done sir! Could you post a diagram of your dual loops, I see you have a few spliters in there. I'm working on a 800D WC set up myself but it'll be only CPU + 1 GPU. I like what you did with the 2x140 Rad on the back, if I ever...
  8. M

    Lost RAID 0 Array?

    After a few reboots this morning the BIOS found my RAID array again and all is well, thread closed
  9. M

    Lost RAID 0 Array?

    I got bored this weekend and decided it would be a good idea to use my ASUS P6X58D Premium's MyLogo feature, such a bad idea. I totally wasn't thinking about losing my BIOS settings or any possible trouble with the RAID array, needless to say it didn't boot right back into windows. I reset...
  10. M

    New 930 Build

    I have everything running pretty decently now. The only major snag I hit was my Mugen 2 will not work with the P6X58D because you have to replace the stock back-plate with a new one and the P6X58D's back-plate is screwed and glued to the PCB. I'm stuck with the stock cooler until I get a new one...
  11. M

    New 930 Build

    Okay I get it now. When I said spacers I meant the rings they show being put on your fittings before you screw them in to the board so that the threads don't go in as deep, but I get what you were saying about the thermal pads. Well I'm less apprehensive about WC the 5770 now I'm still going...
  12. M

    New 930 Build

    I have read the EK blocks instructions and am mostly worried about short circuiting the board by installing it wrong. There is one step that says "Temporarily remove the water blocks to check for uniform surface contact between the block and the components. Note the pattern of contact on a piece...
  13. M

    New 930 Build

    I should go with the reduced & split 1/4 loop for the spinner then? The only problem is the added tubing and T-reducers will be a pain to hide/tie down as I don't think there is enough room for both in the drive bays, but I might be able to get one along the back side of the case and the other...
  14. M

    New 930 Build

    Hey can you guys take a look at my planned build? I'm ordering the MB and CPU soon, but the the water cooling parts will have to wait until summer. I have most of the major parts already like the case (800D!), PSU... When I get enough $ for WC I plan on doing a single Pump>CPU>Rad>Front...
  15. M

    Front panel lighting controller and 3.5" bay mod

    I am working on designing a 5.25” front panel for controlling all my cold cathodes, but I also want the same panel to hold a 3.5” bay for my card reader. I have some neat 3.5 brackets I scrounged from an old gateway to act as the 3.5 bay. My plan is to use black acrylic or my corsair obsidian's...
See more
Back
Top