Recent content by Mastaba

I have a PC with X9SRH-7TF motherboard that i don't reboot very often. (a few times a year at most) Yesterday i did it and the boot is now stuck on the "LSI Corporation MPT2 boot ROM successfully installed!" message. (The mobo has some LSI 2308 controller connected to the drives) I tried...

I got this: Does that mean the HDD is dead? Also how to set email alerts? I tried entering my gmail adress but how can nappit need to know my email password account to send me email? I tried to test mail & TLS (? don't work)

Is there something to do for protecting my ZFS boxes from wannacry ransomware? If some infected machine is connected to the local network can it access them by SMB?

Is it true that a GPU used to redeem a code is tagged and can't be used another time?

Can i redeem a 1070/1080 key using a Titan X?

It's not a thin aluminium foil, you'll need some serious force to adjust it. And i'm worrying about weakening it (if not damaging it), especially at the welding points if i bend it again in the opposite direction? Because these bent thing are supporting the whole weight of the cabinet itself and...

I bought a 22U cabinet from xcase a (long) time ago but the frames are bent so the doors won't close: I mailed xcase and he replied something like he's not forgotting me and waiting a new container to replace it. That was two years ago, in 2014.

it's not required, these GPUs automatically throttle themselves at something like 85°C (fan speeding up and become noisy in heavy load) Off course if you want maximum performance and oc, watercooling really help, and it's much more quiet. Before wc i was 85°C and noisy, now it's more like 45°C...

It's a tight fit but it still fit, even with a long graphic card with a backplate.

Hi, Does my unit has the latest revision? The number to check is 1633 here right?

I'm interested in that monitor, but how is the input lag/latency? Is it same/better/worst than the PA301W? Prad's review talk about like 80ms which seems quite high to me, but the panel is 10ms when my PA301W is 12ms so i thought it should be at least good?

Thanks, but i already have a SX500 and wondering myself if there was going to be a problem. I thought 300W for gpu, 100W for cpu and 100W for mobo/stuff, should fit even without room for more? If not or too much tight fit I'd gladly take a SX700 but the load based only fan control thing is...

Titan x pascal + 6700K in a M1, do you think the SX500 is enough? I read the titan could reach like 300W when oc.

I get peaks like 92°C with battlefront, blower at full speed. (and 60°C for the 6700K) Reason i want to set a watercooling, but i don't know well how to set the right angle fittings on the correct position.

I'm trying to figure out how to watercool CPU+GPU in M1, classic config using one side 240mm rad and one bottom DDC pump. What kind of fittings do you use? There is obvious need for right angled fittings, but i heard many stories of leak because of some rotating fittings, and i don't know how am...