Recent content by jmnovak

Nice! What are your setting/voltage? I'm pretty sure you 3900X guys have an overall bandwidth advantage.

So I've been trying to get my EDC in Ryzen Master to read the MB max of 360A, for some reason it will only show 145A. In my attempts to fix this I've been uninstalling and reinstalling Ryzen Master and noticed that with each install the program changes the best cores. Now the top cores are...

Well after tweaking timings I dont think getting much more than this out this Gskill dual rank stuff.

His board might be pushing the CPU. plus Ryzen Master is only software that shows true specs. Look at his bus(101.3mhz)/voltage maxing out in the 1.53v+ Everything is wacky. Plus if it is hit that speed theres no way its hitting that for more than 1-3sec... more than likely its hitting 4.3ghz+...

3666mhz is soild stable ran Memtest to 1200% no errors. I can pull 3733mhz but get around 3 errors at the 500% mark on Memtest most likely would have to bump settings down or voltage up to get it.... but at that speed I get 3800mhz is a wont boot at any settings so this setup is maxed at the...

I dont know how you guys are getting such high bandwidth. Im only pulling 54,200 read /29,200 write @ 3666 with these timings. Noticed its the 3900X guys with high bandwidth. I know about the write issue because of the chiplet design. But I'm guessing that your read bandwidth is higher also...

Well after editing Powerplay table (no bios stuff) I think Im maxed out on air. 1700mhz avg clock with 1100mhz HBM. stable at 61-65c core 66-70c HBM. Cooler Sapphire used on this card is great. Got the card on sale for $390 and it keeps close to a 2070 which is going for $100-$130 more so I...

Hey does this seem right? trying to undervolt since everyone says it the way to go. but Im down to 980mv no crashes yet.

Samsung. I dropped it to .975 and it locked up/crashed. 1.0 was stable but my core settings were set higher(P6-1632/P7-1742) when that happened.

So just picked up a Sapphire Nitro+ Vega 64. After some driver issues were worked out card seems great. I have it locked it at 1665-1715mhz (1690avg) core 1.2v @ 66c 1100mgz HBM 1.1v @ 70c Been trying to read up on info to pull more out of the card was wondering if anyone has some tweaks that...

So things seem stable after some tweaking I have it locked in @ Core 1690avg. @ 66c Mem 1100avg. @ 73c Card runs pretty cool so heat shouldnt be issue. Its been awhile since I have had a AMD card so re-learning the in/outs of tweaking it. I tried undervolting but all I was getting was same...

So I swapped power cables from on PS from VGA1 and VGA1(two seperate plugs) to VGA1 and VGA2. Plus I deleted afterburner/rivatuner and rebooted. Seems to have fixed issue so far. Ran two games no issues. More test to come. Clocks-1695/1100 Timespy test -Score 7887 Graphic score 8069

I see. Yeah I have a 750w Cosair laying around. You would think a 1300w P/S would be ok. Willing to check everything though.

Ill try removing stuff and reinstall. Power cables are good, no splits, two individual cables. it pulls 1640mhz in 3dmark so didnt think it would be power issue.

So swapped out my GTX 1070 for a Vega 64 and now when i load any game its loads for a sec or two then I get black screen and have to reboot. When I did the swap I booted into safe mode uninstalled old driver, etc. Installed new card/drivers. Ran a few games, and benchmarks and was running...