Search results

Nice! What are your setting/voltage? I'm pretty sure you 3900X guys have an overall bandwidth advantage.

So I've been trying to get my EDC in Ryzen Master to read the MB max of 360A, for some reason it will only show 145A. In my attempts to fix this I've been uninstalling and reinstalling Ryzen Master and noticed that with each install the program changes the best cores. Now the top cores are...

Well after tweaking timings I dont think getting much more than this out this Gskill dual rank stuff.

His board might be pushing the CPU. plus Ryzen Master is only software that shows true specs. Look at his bus(101.3mhz)/voltage maxing out in the 1.53v+ Everything is wacky. Plus if it is hit that speed theres no way its hitting that for more than 1-3sec... more than likely its hitting 4.3ghz+...

3666mhz is soild stable ran Memtest to 1200% no errors. I can pull 3733mhz but get around 3 errors at the 500% mark on Memtest most likely would have to bump settings down or voltage up to get it.... but at that speed I get 3800mhz is a wont boot at any settings so this setup is maxed at the...

I dont know how you guys are getting such high bandwidth. Im only pulling 54,200 read /29,200 write @ 3666 with these timings. Noticed its the 3900X guys with high bandwidth. I know about the write issue because of the chiplet design. But I'm guessing that your read bandwidth is higher also...

Well after editing Powerplay table (no bios stuff) I think Im maxed out on air. 1700mhz avg clock with 1100mhz HBM. stable at 61-65c core 66-70c HBM. Cooler Sapphire used on this card is great. Got the card on sale for $390 and it keeps close to a 2070 which is going for $100-$130 more so I...

Hey does this seem right? trying to undervolt since everyone says it the way to go. but Im down to 980mv no crashes yet.

Samsung. I dropped it to .975 and it locked up/crashed. 1.0 was stable but my core settings were set higher(P6-1632/P7-1742) when that happened.

So just picked up a Sapphire Nitro+ Vega 64. After some driver issues were worked out card seems great. I have it locked it at 1665-1715mhz (1690avg) core 1.2v @ 66c 1100mgz HBM 1.1v @ 70c Been trying to read up on info to pull more out of the card was wondering if anyone has some tweaks that...

So things seem stable after some tweaking I have it locked in @ Core 1690avg. @ 66c Mem 1100avg. @ 73c Card runs pretty cool so heat shouldnt be issue. Its been awhile since I have had a AMD card so re-learning the in/outs of tweaking it. I tried undervolting but all I was getting was same...

So I swapped power cables from on PS from VGA1 and VGA1(two seperate plugs) to VGA1 and VGA2. Plus I deleted afterburner/rivatuner and rebooted. Seems to have fixed issue so far. Ran two games no issues. More test to come. Clocks-1695/1100 Timespy test -Score 7887 Graphic score 8069

I see. Yeah I have a 750w Cosair laying around. You would think a 1300w P/S would be ok. Willing to check everything though.

Ill try removing stuff and reinstall. Power cables are good, no splits, two individual cables. it pulls 1640mhz in 3dmark so didnt think it would be power issue.

So swapped out my GTX 1070 for a Vega 64 and now when i load any game its loads for a sec or two then I get black screen and have to reboot. When I did the swap I booted into safe mode uninstalled old driver, etc. Installed new card/drivers. Ran a few games, and benchmarks and was running...

nah... memory on die now, plus just a clean design with 7nm.

Yeah... 4.225-4.25ghz(1.381-1.410v) seems to be doable limit. I pushed 4.35ghz but it took 1.52v to get stable which was crazy for 100-125mhz more. but very happy with platform so far. Get some 3200-3600mhz B-die and call it good till the 3600+ chips come out.

Here what Im getting memory wise

Yea... after messing around with the system I was able to get everything stable(prime95/RealBench 8hr runs) @ 4.225ghz 1.381v w/LLC5 and Mem.2866mhz 14-14-14-39-1T using Dram Ryzen calculator. No matter what setting I used memory wouldnt go any higher than 2866 stable. I am using 4 dimms and...

Single core performance is obviously on par with a 9900k but guessing at lower clock speed. IPC efficiency itself has most likely went up 10% clock for clock. A 2700x @ 4.3ghz get 180 in CB15 for single core. Just on IPC improvements alone the new chips should probably get 198 to 200 at the same...

Like everyone else said no mention of specs as far as clock speed or performance increase but just guesstimating on what they showed us and looking at other reviews about a 10% increase in clk to clk IPC performance over the 2000 series. If she's telling the truth and the clock speeds are from...

Yeah/ Ive been playing around with settings. CPU can pull 4.325ghz but takes 1.42v in Bios and under load its 1.502v Temps get up to 81c. Way to much temp and voltage increase for 125mhz so I backed it down to where I was. As far a memory.... Im stuck. No matter what I do it wont go past...

Thanks guys. Overall pretty happy. System performs close to my old 5820k @ 4.7ghz 5820k@ 4.7 CB11.5- single core 2.10 multi core 15.40 CB15- single core 188 multi core 1421 CPUZ single core 501 multi core 3740 2600@ 4.2 CB11.5- single core 1.95 multi core 15.65 CB15- single core...

So my X99 system took a dump. No post, code 00. wasnt going to vest in aging system so went with a 2600 for now. Wanted to make sure voltage and temps seemed within range since its been a while since I was on AMD platform. Specs are in sig. 4.2ghz @ 1.36v Lvl 4 LLC Prime95 26.6 Blend- 4hrs...

Just itch. But dont want to waste $$$ on small gains either.

Been thinking of upgrading my CPU but wondering if its worth it right now or if I should wait aliitle longer. Right now I'm running system in my sig. From what I can tell its benching around stock 8700k numbers: CB15- 188/1409 CPU-Z- 495/3740 Queen-81291 RealBench Encode-136,054 (39.16)...

I ran realbench 2.56 with rig in sig and scored the following: Image Editing 210,111 Time:25.357 Encoding 136,054 Time:39.1607 OpenCL 113,529 KSamples/sec: 20878 Heavy Multitasking 166,065 Time:45.9576 System Score 156,441

Might not be fastest out there but havent noticed any need for that besides bragging rights. Close to an 8700k stock CB 11.5 - Single-2.15 Multi- 15.41 CB 15- Single-191 Multi- 1419 CPU-Z Single-523.7 Multi- 3925.4

Running a 5820k @ 4.7ghz 1.312v for last few years. Does everything I want so no need to update. New stuff tempting but holding for now.

But what Im noticing is a drop in voltage available when messing with memory speeds. Thats effecting max overclock. That doesnt happen with a CPU/Mem overclock.

If your implying that furmark pushes the card to hard thats not the case. I also ran Valley, Heaven, TimeSpy with similar results. Grant it most games only push the card to 80-95% power limit. Some do max it out. Witcher 3, Fallout 4, hell even my Stalker/ Metro games max it out.

ok.....?

Was thinking about trying this mod to see if it would make difference

Had some free time to mess with overclocking the 1070 this weekend and noticed that memory clock and fan speed effected my core overclock/voltage. Heres my finding: eVGA Precision X overclocking tool Uesd Furmark max setting 1440 res 1070 is a FE board with 3 fan cooler (temps stayed 55-58c)...

sample set to 100 5820k @ 4.7ghz 24.25. Programs open in background.

48.65 i7 5820k @ 4.7ghz.... Im sure there was shit running it background didnt close anything.

Its going to ened up being a personal preference choice. Most of the 1070s are on par with each other just make sure you get one with a good cooler and samsung memory if you plan on overclocking card. I picked up a Zotac 1070 that has a aftermarket cooler with FE board and I get 2022-2113mhz on...

Very happy so far! Came from AMD camp (5770, 6950, 290) and couldnt be happier. What did it for me mainly was deal I got ($342) on a 1070.(O/C gets me close to 1080 performance) I dont game nearly as much as I use to so getting a great card at a good price was sweet.

Just ran Orange room.... 10585 @ 230.75fps

After putting card through its paces (ran Heaven loop 45mins no issues) This looks to be the max overclock Temps are stable at 55-56c but card throttles power if I go any higher. Core is steady at 2050-2088mhz with peaks at 2135mhz. Card still has more to give if it wasnt power limited. Will...