it is most certainly not bending the card.
All the pressure is applied right at the socket, its most certainly not bending it AT ALL.
fan:
Sunon 92mm KD1209PTB1 Fan
Specifications:
92mm x 92mm x 25mm
Model KD1209PTB1
DC12V, 2.9W
Ball bearing with 3 wires.
49CFM at 34.5dBA
Okay guys.
So i installed this thermalright hr-03 plus right?
temps down 30c idle/load.
'nuff said, so heres the pics.
http://img145.imageshack.us/img145/5512/picture004vf8.jpg
http://img98.imageshack.us/img98/2448/picture007ju2.jpg...
Hi guys.
I have a silverstone ST60F. (650w modular)
I was wondering if it makes a quick "buzz" noise when power to the psu is turned on?
I havent noticed any problems, but i will claim warranty if this isnt normal.
Thanks
Hey ppls.
Just a quick tip. (pics will come tommorow).
The rear fan, near the cpu, theres a spot below the PSU which, if you de-pin the connector, you can put the cables through, then plug in molex in the back, thus basically eliminating a very ugly fan wire!
Anyone got any other tips...
I'm interested in putting the following on a raid controller:
seagate 320gb 7200.10 (raid0)
western digital raptor x 150gb (JBOD)
Is it possible to have both of those on the following raid controller?
http://www.i-tech.com.au/products/5680_HighPoint_Rocket_Raid_1740_4_ch__4x.aspx
Hello peoples.
I currently have:
Gigabyte GA-956P-DS3 REV2
e6600
Thermalright ultra-120
corsair xms6400 2gb dual channel 4-4-4-12-2t-2.1v
atm im at 1.35V 3.2ghz 1:1 ratio ram.
Stable orthos for 18 hours.
I can post at 415 fsb (around 3.8ghz).. But crash when loading...
i dont think this is the problem i am experiancing, as when i use the fix for that grey bug (directx81) it does not fix this.
Can anyone please test what i am doing on their 8800gtx to confirm if i have a hardware fault?
Thanks
Hello, in CS_assault, when i shoot the top back door with the Terrorist starting pistol, then look at it from an angle or from far away (close to garage door) then it goes all blocky and weird.
Can anyone else confirm this for me on their pc?
This is on a completely fresh install with...
Hello peoples..
Just built up a new pc
Asus P5N32-E SLI
TWIN2X2048-6400C4 (pro model with led's, detected as 6400C4) (Dual CM2X1024-6400C4)
Detected as 5-5-5-18-1T 1.8v - Stable in dual channel
Changed to 4-4-4-12-2t 2.1v (rated specs) - Stable in dual channel (12hr orthos 2core)...