8800gtx air cooler installed, temps down 30c

holy christ that thing is huge! good of you to put those aluminum sinks on the PWMs, just make sure there's enough peripheral airflow over them to keep them from boiling.

what are your load temps?
 
not bad at all... but that takes up a lot of slots... you couldn't do sli if you had that... but thats a huge decrease in temps...
 
i bet if would be even more if he had the room to put it the other way, with the fan and fins on the back of the card, so that the heat pipes would be working more efficiently, or if you had a BTX style setup ( remove all cd/dvd's from drives, and flip your computer one day, see what the temps do? out of curiosity)

but still a great temp improvement !
 
Jesus christ the thing takes up like 4 extra slots and looks like it's bending the card something awful. Still one bad ass cooler though. :D
 
it is most certainly not bending the card.

All the pressure is applied right at the socket, its most certainly not bending it AT ALL.


fan:
Sunon 92mm KD1209PTB1 Fan


Specifications:

92mm x 92mm x 25mm
Model KD1209PTB1
DC12V, 2.9W
Ball bearing with 3 wires.
49CFM at 34.5dBA
 
Link where to buy? price?

My GTS 320 is idling like at 60C :mad:

I even have 120mm fan next to it, and 60mm fun under it :eek:
I touched the pipe while playing BF2 and it burned my finger lol
 
I don't think he could fit it the other way around. (the cpu hs might be in the way)
 
the HR-03 is designed to go on either side. so if you have room on the backside of your card, it would actually give you a slot or 2 back to use. That might be enough reason for me to get one, but I only run a 7900GTX for now. Waiting on the 8900GTX before upgrading. Might go core2duo/DDR2 at the same time, I don't know.

But, if I was having to buy a new mobo, etc anyway at the time, it would be something to keep eye on when choosing the next board. The space between the pci express slot and the CPU.

Either way thats a sweet ass heatsink.
 
Link where to buy? price?

My GTS 320 is idling like at 60C :mad:

I even have 120mm fan next to it, and 60mm fun under it :eek:
I touched the pipe while playing BF2 and it burned my finger lol


My 8800GTS (640MB) idled at 60c in a Dell BTX case.

I added an antec dual slot card-cooler and that lowered the idle temp to 56c (medium speed) 53c (high speed).

I haven't checked load temps yet...
 
The heat is all exhausted from your case though, and the card was designed to run at those speeds. I see no reason to worry about the cooling unless it's limiting your overclock.
 
OP you got eye for neatness, cables are well hidden :D

Also the GPU cooler is a monster, how long did it take to install it?
 
Thanks for jumping in OP. I have had my 03 Plus sitting on the desk for a couple days now. I hate giving up 4-5 slots just for cooling. Then some random guy said he was getting worse RAM oc's (maybe those itty bitty ones). Tho he prolly wasn't cooling them well enough.

The round the back like Legion's done would be possible on say...the Commando, but then you add a fan and it blows down, screwing w/ the airflow.

From my experience w/ the original 03, air in the case is not a problem if you have adequate cooling. Stick a 120 on there and it'll actually help NB temps!

I sure wish TR would have designed this thing to work better for more traditional cases and not so much the flip up back. Anyone looking @ a sink like this already upgraded their CPU to a Tuniq/Infinity/U120 and possibly their NB too! We got no more room up there guys!! :confused: :confused:
 
I just installed mine yesterday in the same configuration. Easy install, but a couple things to watch out for.

Obviously make sure you are well grounded, a wrist strap or non conductive matting, etc. Don't wanna blow up your $300+ card.

You may have to work to get the stock HSF off. I slowed rotated (well, tried, it didn't move much in the beginning) it in the same plane as the PCB, making sure not to flex the PCB (those small internal lanes / planes can be finicky!). It took me about a minute of slow steady pressure to get it to come off. Cleaning it well is another step, I used isopropyl and q-tips, and easily went through 30 qtips cleaning it up.

When installing the PWM sinks, makes sure that you don't bridge / short any of the caps that are around that area. I simply used some mylar (non-conductive) tape to cover the caps. Also, make sure to insert the screws all the way into the hold down plate tightly, or they may come loose when tightening the nuts on them.

Haven't finished ordering all my parts for my system yet, so can't comment on idle / load temps.

I noticed quite a few parts that were soldered down askew on my board, mainly the big inductors (2) next to the pwm's, and a couple of the 0805 (2) sized capacitors. I fixed them myself at work (I'm an EE at Analog Devices) but was curious to see if anyone else had some minor QA issues.
 
Back
Top