Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Too many variables there. In general, the more cores, the less that the CPU will overclock in the first place. It also depends on the other factors, such as CPU and case cooling. There is no getting around that.What about overclock ?
Hello guys,
I want to use I9 10980xe Cpu with ASUS R6E motherboard.
How much memaory I can use in that case ?
Is there any issues with that motherboard and CascadeLake-X?
Just make sure that the BIOS version on that motherboard is recent. You see, the R6E requires BIOS version 2002 or higher in order to use the Cascade Lake CPUs on that board. If for some reason you have an earlier BIOS version, you will need to find an older, 7000- or 9000-series X-platform CPU in order to perform the BIOS flashing.
What about overclock ?
Too many variables there. In general, the more cores, the less that the CPU will overclock in the first place. It also depends on the other factors, such as CPU and case cooling. There is no getting around that.
. However, you don't exactly find poor VRM's on X299 boards. They were always spec'ed to support 18c/36t CPU's like the 7980XE right from the start. The cooling is up to you. However, if you really want to overclock it, you will need a top tier AIO or a custom loop to do it.
I will try to ask more clear questions. I buyed that CPU from one guy with ASUS R6E Omega and there it was running at 5 GHz at 1.3 volts.
i am alsoI'm skeptical about such a claim based on what I've seen those CPU's do.
i am also
OP
did he mention how massive a radiator he had attached to it?
because at 1.3v on my 10980xe im totally cpu throttling even with a 420mm x 60mm radiator and custom waterloop. i have a 1260mm radiator (and 4 200mm fans) comming in a couple weeks to do the much hyped 5ghz all core and finally tame the thermals.. but without MASSIVE cooling its simply not happening.
I used a 420mm and a 480mm and couldn't get the temps that low. Granted, I had the GPU in the same loop, but it wouldn't generate all that much heat doing benchmarks that tested the CPU alone. The issue comes down to the fact that the surface area of the die, heat spreader and TIM are all bottlenecks for cooling. You can't just throw infinite radiator space at it and expect to tame the 10980XE. It just doesn't work that way. Also, the voltages required to stabilize it at 5.0GHz all core don't help. At 1.3v, my test sample from Intel would only do 4.8GHz all core with the above radiator configuration. 4.7GHz is about all it could manage on the same board using a 360mm radiator setup and an older waterblock design.
ohh dude i wanna see! but 5ghz on the 1st gen rampage vi will be rough. not impossible with the monoblock but probably still rough. sounds like we will have a very similiar set up all said and done. i have a 360x60 420x60 and the 1260mm rad comming in a couple weeks (been on back order since july was told easly sept delivery) and i have the newer rampage VI with the new monoblock from EK.. im not using that block RN but i might throw it on.I have Monoblock and 420 + 560 + MO-RA3 420 (3x420 mm) so my cooling should be ok. But that motherboard is old and not so good like Omega and that is the reason for that post.
I stand mostly corrected on this. What I had stated was based on my own experience with some of the other motherboards that I had owned in the past. Some of those would not even POST at all with a newer CPU than what was supported.This is factually incorrect. While 2002 or later is required to support Cascade Lake-X, the RVIE does not even need a CPU installed to flash the BIOS.
I stand mostly corrected on this. What I had stated was based on my own experience with some of the other motherboards that I had owned in the past. Some of those would not even POST at all with a newer CPU than what was supported.
And I stand corrected on the ASUS ROG motherboards. These have a USB port that is assigned to flash a newer BIOS (or even a BIOS version that is older than what can be flashed under normal means) whenever the system is powered off. So yes, the ROG motherboards do not even have to be powered on (but just merely plugged in) to flash a newer BIOS version.
Basically, any motherboard with a BIOS flashback feature should be able to do it as they have a specialized ASIC that does everything required to make it work. Every ROG board I've ever reviewed or looked at had this capability as do many others. The ASUS X299 Prime Edition 30 is another example of a motherboard that has this capability. On Intel boards, it's common to have this feature through the entire mid range. Even some lower end (not bottom of the barrel) boards have this capability. On the AMD side where you really need it, the feature is less common.
Oddly on x399 its on every board I can think of. Bummer it was only supported for a gen and a half. It did save my bacon once. So I guess I should be glad it had it. But yea it should have been a no brainer. But those mobo vendors wanna sell new boards. Not keep people on old ones. Arg
isn't x399 dead? threadripper 3 don't support itx399 has a pretty good commitment for the future too, supposedly.
x399 has a pretty good commitment for the future too, supposedly.
History repeats itself, in this instance:No, it doesn't. Socket TR4 is dead. It was replaced with the electrically incompatible sTRX4 and the TRX40 chipset.
Fuck, forgot that wasn’t the chipset for TRX40. Spent too many hours reading about them.No, it doesn't. Socket TR4 is dead. It was replaced with the electrically incompatible sTRX4 and the TRX40 chipset.
Utter brain fart. Stupid numbering schemes.isn't x399 dead? threadripper 3 don't support it
History repeats itself, in this instance:
Intel also changed a few pins when it introduced its Coffee Lake (8th Generation) CPUs in late 2017. In both instances, the CPUs physically fit directly into their predecessor sockets, but attempting to operate such a system would result in a failure to even POST.