NVIDIA Big Format Gaming Displays - BFGD

Kyle, aren't they kinda killing SLI? not raining on your parade for fun, just saying, it may be fun, if SLI is kept alive, otherwise you won't have enough horsepower no matter what card you use :-(
 
I just want a 39-43 inch gsync hdr 4k monitor. it seems they have skipped over that.
 
I would love one of these displays.

But UHD at 120hz?

On a HDR screen?

With VRR technology?

Call me skeptical. I don't think we'll see these this year, if AT ALL, and if we do, they'll be the better part of 10K.
 
Kyle, aren't they kinda killing SLI? not raining on your parade for fun, just saying, it may be fun, if SLI is kept alive, otherwise you won't have enough horsepower no matter what card you use :-(
No. NVIDIA is in now way "killing" SLI. It just simple not as "important" as it used to be. A lot easier to buy one 1080 or Ti now and not have to worry about any of the downsides to SLI that have always been present. We have been promised "mGPU" support though but a lot of that has not been forthcoming. True SLI and CF are moving towards being things of the past, but we do not see mGPU being picked up like we would have hoped on the desktop and in VR, but the skeleton support is there for a lot of it. Bottom line, support for SLI/CF/mGPU is hit and miss. Then scaling when it does work is a whole other story.

As for setting up 3-way 4K 75" screens, it was simply for fun because I currently have the screens here. I would in no way suggest any GPU combo is up that at this point. Hell, even the HDMI to DP adapters are rated at 24/30fps at 4K. Screens are for this... InsideVR project.

17-1216_VRARENA_TEST2.jpg
 
Right, but with a 65 inch TV you definitely would have to look around. I don't know what the sweet spot is but 65 inch TV is much further than 3 feet.

I've done some comparison, and for me I think the ideal screen size at arms length viewing distance (roughly 2.5') would be ~42"-44". My 48" Sammy is a tiny bit large, but not insanely so. I would be happier if it were slightly smaller though at my viewing distance. 65" would probably be a little further. 4' maybe?
 
43" 4k tv is perfect for desktop.
it will suffice until the hdmi 2.1 TVs come out in a few years.
 
I would have thought VR would have been a perfect application for mGPU. Avoid the traditional issues with SLI/CF by instead of slitting or alternating frames, using one GPU to render per eye. Maybe we'll see this when VR really takes off and the resolutions start shooting up even higher.
It is, but very few titles have embraced it yet. And surely the need is there on AAA / A titles. The underlying support is there with both Unreal and Unity.
 
I just watched the videos on Samsung's MicroLED tvs, with 2000nit brightness.
146 inches.
That's my next display
 
I just watched the videos on Samsung's MicroLED tvs, with 2000nit brightness.
146 inches.
That's my next display

Why so bright?

My JS9000 maxes out somewhere between 550 and 600 nits, and I keep the backlight at like 6 out of 20, because anything brighter than that scorches my goddamned eye balls out of my head.
 
Why so bright?

My JS9000 maxes out somewhere between 550 and 600 nits, and I keep the backlight at like 6 out of 20, because anything brighter than that scorches my goddamned eye balls out of my head.
Best purchase I ever made..... 55" JS9000 best monitor for gaming, movies and hell it does 3d if you use it.... "when have I done 3d... Yeah when I want to watch a 3d movie!.... ponders when... Still happy it has 3d Damnit!"

I like the curves and it works for everything I need. Now if we get a 65" it will be big... bit overkill for a bedroom / gaming monitor but I would definitely be in for 1 if it beats this Samsung.

On a personal level, the best purchase I have ever made for my PC:

$$$ on custom Lian Li Case before we modded cases (still using it years later)
$$$ on a Steelcase leep leather chair with a padded top as a gaming chair... Amazing
$$$ on this JS9000 My eyes thank me every day
Everything else for the computer is great but nothing lasts as long as your:
Monitor, Chair, Case. Great investments and I am so happy Nvidia "gets it" and is doing something no one else is stepping up to the plate to do.
Stock price will surely go up.
 
Waaaaaaaaaaaaaait a second, the pictures were of the displays actually being at the office?????? aaaaaargh ok that must be sexy AS FUCK lol.
I thought it was a set of pictures from the boxes at CES or some such. Congrats Kyle!
 
G-Sync is over rated. I bought acer xb240h version 1, tested ulmb 120Hz, gsync and basic 144Hz. I get the best gaming out of basic. I do have my monitor overclocked to 149Hz.
Ys1sszJ.jpg


I spent a lot of money on this monitor "thinking" gsync would make a better gaming experience, it actually makes it worse.
Tested on Dirt Rally, CS:GO, cod1,cod2,codmw1,codwaw, it's horrible for these games.

Waste of money.
 
Why so bright?

My JS9000 maxes out somewhere between 550 and 600 nits, and I keep the backlight at like 6 out of 20, because anything brighter than that scorches my goddamned eye balls out of my head.
For HDR and Dolby Vision. The latter targets 4,000 nits peak brightness currently, while the former targets 1,000 nits. I'm guessing 2,000 is a middle ground so you can enjoy both. Dolby Vision wants to eventually hit 10,000 nits.
G-Sync is over rated. I bought acer xb240h version 1, tested ulmb 120Hz, gsync and basic 144Hz. I get the best gaming out of basic. I do have my monitor overclocked to 149Hz.
Ys1sszJ.jpg


I spent a lot of money on this monitor "thinking" gsync would make a better gaming experience, it actually makes it worse.
Tested on Dirt Rally, CS:GO, cod1,cod2,codmw1,codwaw, it's horrible for these games.

Waste of money.
If you're already hitting max refresh rate on those older games you listed then G-Sync would not have done anything for you anyway. ULMB will be the best if you can hold a constant framerate. What was your expectations going in with the monitor? I highly recommend reading through this.
 
For HDR and Dolby Vision. The latter targets 4,000 nits peak brightness currently, while the former targets 1,000 nits. I'm guessing 2,000 is a middle ground so you can enjoy both. Dolby Vision wants to eventually hit 10,000 nits.

If you're already hitting max refresh rate on those older games you listed then G-Sync would not have done anything for you anyway. ULMB will be the best if you can hold a constant framerate. What was your expectations going in with the monitor? I highly recommend reading through this.

ULMB has always been a non-sterter for me given how dim it is. I think G-Sync is fantastic, the only reason I ditched it was for the size and image quality my current display offers.
 
ULMB has always been a non-sterter for me given how dim it is. I think G-Sync is fantastic, the only reason I ditched it was for the size and image quality my current display offers.
It just takes a minute or two for your eyes to adjust. Some of the newer monitors with ULMB are brighter with it enabled, now, thanks to higher peak brightness. My biggest issue is the loss in contrast ratio and slight skew in color reproduction.
 
It just takes a minute or two for your eyes to adjust. Some of the newer monitors with ULMB are brighter with it enabled, now, thanks to higher peak brightness. My biggest issue is the loss in contrast ratio and slight skew in color reproduction.

The only monitor I tried with ULMB personally was the ROG Swift PQ278Q. I found it way too dark and as you pointed out, the colors and contrast weren't good. I relied on G-Sync and ran at 144Hz all the time. This provided reasonably good image quality once calibrated. I had three of them in NVSurround and that wasn't one of my better ideas. I ran three Dell 3007WFP-HC's for several years. Naturally, I wanted a more modern and gaming oriented display. I wanted a setup I could run in portrait mode as most games didn't want to run wide aspect ratios without issues, or distorting the image. Running in portrait mode wasn't really feasible with the Dell 30's, as they were too wide and in portrait mode were too tall to use their existing stands. New stands that could handle them were nearly non-existent. I also needed to be able to put them back in landscape mode as I hated the bezels being in so close for productivity tasks. So, I settled on the ROG Swift monitors and found out they were fine for landscape, but sucked in portrait mode due to being TN panels. I also found 16:9 at that resolution, with a lack of horizontal work space annoying. For me, G-Sync and 144Hz wasn't worth the loss of vertical workspace. It wasn't worth the loss of image quality. The 3x27" setup in portrait mode creates a display about the same size as what I have now which I liked. Unfortunately, this didn't work too well given that I had to sit at a weird angle to handle the vertical shift in the TN panel's viewing angles.

I didn't run this setup very long before buying my Samsung JU6700. Unfortunately, I had issues with that panel after owning it for just over a year which led me to the KS8500 which I'm much happer with. I had used 60Hz displays for so long that going back wasn't a big deal. At 4K I wasn't seeing frame rates that would have made greater than 60Hz displays work anyway even if there had been some that offered 4K resolution beyond that. I also like HDR, which is available in very few "pure" computer monitors. All displays today require some sort of trade off. None of them are perfect. What I've traded for this size and image quality is worth it to me. Although I understand there are ULMB fans that will take those trade offs for their own reasons. Similarly, there are die hards that won't go back from 144Hz regardless of the resolution and size of the display.
 
With a large 4k display, isn't FOV an issue? I mean, having it fill your peripheral but with a 90deg FOV just makes everything look big. I feel this is an advantage of Eyefinity/Surround where the larger ~141deg FOV actually gives your peripheral vision in games. And boy, do I find it makes a difference in FPS' ... especially when the 2d scope overlay only covers the main monitor in the middle.
FOV isn't the issue on large displays, the frustum size is. Optimally, it will increase proportionally to the size of the display so you can see more in all directions. Increasing the FOV will just skew the image further the higher you go.
 
Back
Top