DAN A4-SFX: The smallest gaming case in the world

Here is fast made drawing how to mod the Nexus Low 7000 R2:

low-7000r2drawing_0xoc4udq.jpg
I bought the prolimatech slim 12 fan, do you know if I'll be able to use the 2 ram slots????
 
Case arrived yesterday (UK), quickly transferred an existing build over and managed to span some quick photos.

Gear
i7 6700
Cryorig C7
Asus Z170i
16GB Corsair Vengeance 2400 MHz
Silverstone SX500-LG
EVGA GTX 970 FTW
512GB Samsung SM951, M.2 PCIe 3.0 NVMe SSD
2X SanDisk Ultra II 480GB

Overall Impressions
Really happy with the case, fantastic quality and the designed tolerances for components is perfect, great gob Dan! Might have to order one in silver in the future!

Build it's self was pretty quick and simple, the included manual was also excellent, probably took around a hour most of which was planning and attempting cable management. Having a SFX-L PSU is somewhat of a pain as it give's you a lot less room to work with, it does fit much better than the M1 though and i'll probably be ordering some custom length cables which will make the cable management a lot simpler.

Temps
The 6700 idles around the mid 30's with the C7, highest I've had it was 77. GTX 970 idles around 58 without the fans. Some quick stress testing with firestrike got it to a high of 79.

Noise
As most people have figured the C7 is way to noisy due to the low clearance from the sidepanel, without the sidepanel its perfectly acceptable and I'm pretty impress with it as a cooler considering its size. I've already ordered a Noctua L9i.

Nice, I'll have almost the same setup. Other psu and storage, and I already have the Noctua. I consider buying mysefl a nvme m.2 drive, but I'm not sure I'll notice the speed differences between my current EVO 950 ssd and the sm951. And it sitting behind the motherboard and the GPU will probably not help with the temps causing possible thermal throttling. What temps do your m.2 drive get under load?
 
That seems nice but... I can't find it in europe. And...
1) Does it always have this terrible clips like Intel default ?
2) What about max RAM height with the Noctua NF-A9x14 ?

Checkout the photo, I think the RAM heat sink needs to be removed

fc9c871e14.jpg
 
Does anyone think placing a larger fan, like a 120mm fan, slightly off center on the C7 makes a difference in performance? On the Asus 270 mobo there is a large 38mm heatsink over the IO ports that I don't think the C7 heatsink clears.
 
Does anyone think placing a larger fan, like a 120mm fan, slightly off center on the C7 makes a difference in performance? On the Asus 270 mobo there is a large 38mm heatsink over the IO ports that I don't think the C7 heatsink clears.

38mm? Hmmm...looks like a hindrance for the Nexus cooler with the Asus Z270i Strix motherboard.

I hope someone could confirm if the Nexus cooler will clear the VRM heatsink on the Asus Z270i Strix or it would not.
 
Give or take. I'm using a tape measure in inches. There are two "steps" to the heatsink, with the outer one at 1.5" and the inner one just a tad shorter. It's the thing hanging over the IO ports in this image:

1483459406843.jpg


Looks like Scythe also makes a 100mmx12mm fan, which shouldn't run up against that heatsink.

https://www.newegg.com/Product/Product.aspx?Item=9SIA6S04SE3360

I think I'm just going to buy a bunch of different fans and see what works, this is driving me nuts...
 
Last edited:
Interms of low profile ram options, are there any globally available DDR4 low profile ram sticks available?

The photo a few posts back shows really low profile ram under the Nexus cooler, but I can't seem to find any (in Australia especially) which are low profile. Even the normal sticks with heat spreader removed will still be too tall.
 
So annoying i bought my C7 months ago and now i find out its noisy as hell. I just picked up the noctua low profile cooler instead. Will attempt to delid my upcoming 7700K to keep temps and noise levels as low as possible
 
So annoying i bought my C7 months ago and now i find out its noisy as hell. I just picked up the noctua low profile cooler instead. Will attempt to delid my upcoming 7700K to keep temps and noise levels as low as possible

Well, an idea discussed in the thread is to slap a bigger slim fan on it, like these 140mm fans:

https://www.amazon.com/SilverStone-Technology-Super-Cooling-FW141/dp/B00VBNTB8C (13mm tall)

https://www.newegg.com/Product/Product.aspx?Item=9SIA4UF1H80572 (13mm)

https://www.newegg.com/Product/Product.aspx?Item=9SIA66Z28S3552 (13mm)

https://www.amazon.com/Thermalright-TY-14013/dp/B00G8GUE74 (13mm)

There are also some 12mm tall, 120mm Scythe fans:

https://www.amazon.com/Scythe-Slip-Stream-SY1212SL12H-120mm/dp/B002CYRROY (12mm, 3 pin, there are different versions with different max RPM's, this is 2000 RPM)

Or a 100mm 12mm Scythe fan, this interestingly has 92mm mounting holes also, so you could try it on the L9i, although not sure if it is actually any better than the A9.

https://www.amazon.com/dp/B006A7W5W...TF8&colid=1WRNCWC7ZJDK1&coliid=I3PCLV6JF42H3H

The above fans at 12mm and 13mm also add ~2-3 more mm of clearance than the stock C7 fan, which is 15mm, and thus may mitigate the turbulence issue further. The c7 heatsink is about 32mm tall. Until someone tests all this out though, this is all just guesswork. But, the C7 heatsink seems to do a better job than the L9i, so a solution with the C7 remains worthwhile for those of us with 7700K chips as opposed to just abandoning it in favor of the Noctua...

There are a whole bunch of 15mm 120 and 140mm fans also. At 15mm on top of the C7 you're back at 47mm and right up against the side panel (48mm clearance), but the theory is less RPM for same airflow mitigates the turbulence.

However you have to consider RAM clearance and any clearance of any other heatsinks or the IO ports, like the VRM heatsink (or whatever that is over the IO ports) on the Asus Z270I, which is 38mm high. I don't believe 140mm will actually fit in the case with the Asus mobo thanks to that damn heatsink, which is in the way. Also you probably want RAM that either has no heatspreaders, or "low profile" heatspreaders like Corsair LPX RAM, which is 31mm, or just take them off. (I have Team Vulcan RAM which is 31.75mm, which barely should fit...)

Of course the easiest solution is to just say screw all of that and get the L9i... I wouldn't blame anyone for that either. ;)
 
Last edited:
As an Amazon Associate, HardForum may earn from qualifying purchases.
Well, an idea discussed in the thread is to slap a bigger slim fan on it, like these 140mm fans:

https://www.amazon.com/SilverStone-Technology-Super-Cooling-FW141/dp/B00VBNTB8C (13mm tall)

https://www.newegg.com/Product/Product.aspx?Item=9SIA4UF1H80572 (13mm)

https://www.newegg.com/Product/Product.aspx?Item=9SIA66Z28S3552 (13mm)

https://www.amazon.com/Thermalright-TY-14013/dp/B00G8GUE74 (13mm)

There are also some 12mm tall, 120mm Scythe fans:

https://www.amazon.com/Scythe-Slip-Stream-SY1212SL12H-120mm/dp/B002CYRROY (12mm, 3 pin, there are different versions with different max RPM's, this is 2000 RPM)

Or a 100mm 12mm Scythe fan, this interestingly has 92mm mounting holes also, so you could try it on the L9i, although not sure if it is actually any better than the A9.

https://www.amazon.com/dp/B006A7W5W...TF8&colid=1WRNCWC7ZJDK1&coliid=I3PCLV6JF42H3H

The above fans at 12mm and 13mm also add ~2-3 more mm of clearance than the stock C7 fan, which is 15mm, and thus may mitigate the turbulence issue further. The c7 heatsink is about 32mm tall. Until someone tests all this out though, this is all just guesswork. But, the C7 heatsink seems to do a better job than the L9i, so a solution with the C7 remains worthwhile for those of us with 7700K chips as opposed to just abandoning it in favor of the Noctua...

There are a whole bunch of 15mm 120 and 140mm fans also. At 15mm on top of the C7 you're back at 47mm and right up against the side panel (48mm clearance), but the theory is less RPM for same airflow mitigates the turbulence.

However you have to consider RAM clearance and any clearance of any other heatsinks or the IO ports, like the VRM heatsink (or whatever that is over the IO ports) on the Asus Z270I, which is 38mm high. I don't believe 140mm will actually fit in the case with the Asus mobo thanks to that damn heatsink, which is in the way. Also you probably want RAM that either has no heatspreaders, or "low profile" heatspreaders like Corsair LPX RAM, which is 31mm, or just take them off. (I have Team Vulcan RAM which is 31.75mm, which barely should fit...)

Of course the easiest solution is to just say screw all of that and get the L9i... I wouldn't blame anyone for that either. ;)

yeah thanks for the post and some of those options are very intriguing but after basically wasting my money on a C7, I just want something which has been guaranteed to work reasonably well. I'll let the delidding take care of the rest
 
As an Amazon Associate, HardForum may earn from qualifying purchases.
  • Like
Reactions: Jspr
like this
Give or take. I'm using a tape measure in inches. There are two "steps" to the heatsink, with the outer one at 1.5" and the inner one just a tad shorter. It's the thing hanging over the IO ports in this image:

1483459406843.jpg


Looks like Scythe also makes a 100mmx12mm fan, which shouldn't run up against that heatsink.

https://www.newegg.com/Product/Product.aspx?Item=9SIA6S04SE3360

I think I'm just going to buy a bunch of different fans and see what works, this is driving me nuts...

How tall is the second or shorter "step"?
 
Interms of low profile ram options, are there any globally available DDR4 low profile ram sticks available?

The photo a few posts back shows really low profile ram under the Nexus cooler, but I can't seem to find any (in Australia especially) which are low profile. Even the normal sticks with heat spreader removed will still be too tall.

http://www.dpie.com/dram/ddr4/innodisk-ddr4-low-profile-dimm
non-ECC ddr4 low profile. it exists! but its server memory and for non-ECC type this is the only one I found.
 
I think I'll be sticking with the stock Intel cooler until a definite winner is shown. At the end of the day, my core 2 macbook pro hit 90 degrees during 3d rendering and I used to leave it rendering over night all the time... It was 65nm I suppose but anything less than 90 should be fine until something clearly better comes along... Maybe ryzen will run cooler with its properly soldered heat spreader... Might get that either.. either way I have till July to decide :)
 
Interms of low profile ram options, are there any globally available DDR4 low profile ram sticks available?

The photo a few posts back shows really low profile ram under the Nexus cooler, but I can't seem to find any (in Australia especially) which are low profile. Even the normal sticks with heat spreader removed will still be too tall.
Using a low-profile memory is just when you mod it with the 120mm fan.
When using a 92mm fan with the Nexus, a standard DDR4 memory height should fit (I hope).
 
But if you use only a 92mm-fan, I doubt the performence will be supperior to the NH-L9i
 
Cant seem to find the nexus anywhere
Nor can i find any low profile ddr4 ram

I regret buying the c7 and my ram now
 
Good find on the ram, not sure if its readily available though?

Certainly much simpler to be considering a 92mm cooler for the reasons of ease of installation and ease of accessibility to the rest of the motherboard. The toughest factor is most probably the ability to source the heatsink, the fan and the ram.

That said, the idea of getting quieter and better performance is a challenge that could be worth undertaking.

Apart from the two on ebay that are now sold, I haven't been able to find any such coolers.
 
Good find on the ram, not sure if its readily available though?

Certainly much simpler to be considering a 92mm cooler for the reasons of ease of installation and ease of accessibility to the rest of the motherboard. The toughest factor is most probably the ability to source the heatsink, the fan and the ram.

That said, the idea of getting quieter and better performance is a challenge that could be worth undertaking.

Apart from the two on ebay that are now sold, I haven't been able to find any such coolers.

I e- mail the manufacture of Nexus Coolers yesterday in US.

I think its unavible for mounting to Ryzen CPU and avsked them when its back in stock and if it will support Ryzen.
 
Have any confirmed lengths om PSU custom cables ? 24 pin 8 pins CPU, Pcie and front mounted SSD ?

Have avsked modify in China and they do custom length and Colors after order.
 
Hey, first time poster here. I managed to pick up one of these beautiful cases and waiting for my parts to arrive.

Question- out of ANY GTX 1080, what would be the best one for cooling? Is there a specific 1080 that has better cooling (and of course will fit) ?
 
@XstreamHard

How do you know, that the surface area is bigger? The fins on the Noctua cooler are extremely narrow, sothat I think the overall surface area could be identical. I don't think the fins from the Nexus are that narrow.

The weight seems to be identical, too. The Nexus is (with a large 120mm fan) just 50g heavier that the Noctua (with a small 92x14 fan)

Same with the Heatpipes. You just need heatpipes, when you have to transfer heat from one spot to an other. On the Noctua just the edges of the coolers would benefit from a heatpipe. Therefore, two heatpipes are more than enough for this type of cooler. Instead, the radiator of the Nexus cooler is super far away from the heatspreader, so that more heatpipes are necessairy.
 
@arun21:
From what I have heard and read, the MSI Gaming would be my choice if I would buy a GTX 1080 for the DAN A4. If not that, then the ASUS Strix.
 
So, is it ok if I share some photos from my build?

These are the components that have been installed already - the GPU will hopefully arrive today.

full.jpg


Let's add the PSU:

full.jpg

Great photos and build sldr ;)

Can I ask you two questions? :p

What camera do u use?

The bag under the case is a bag of a proyector?

Thankyou so much and sorry for the inconveniences :shy:
 
Low Profile DDR4:

Super Talent

4GB F21VEA8GS DDR4 2133 R-DIMM 15-15-15
8GB F21VEA4GS DDR4 2133 R-DIMM 15-15-15

Transcend
4GB TS512MHR72V1HL DDR4 2133 R-DIMM 15-15-15
8GB TS1GHR72V1HL DDR4 2133 R-DIMM 15-15-15
16GB TS2GHR72V1BL DDR4 2133 R-DIMM 15-15-15
16GB TS2GHR72V1CL DDR4 2133 R-DIMM 15-15-15
16GB TS2GHR72V4CL DDR4 2400 R-DIMM 17-17-17

The Transcend modules are available in Europe

By the way: If you use Nexus + A9x14 you can use normal RAM.
 
Low Profile DDR4:

Super Talent

4GB F21VEA8GS DDR4 2133 R-DIMM 15-15-15
8GB F21VEA4GS DDR4 2133 R-DIMM 15-15-15

Transcend
4GB TS512MHR72V1HL DDR4 2133 R-DIMM 15-15-15
8GB TS1GHR72V1HL DDR4 2133 R-DIMM 15-15-15
16GB TS2GHR72V1BL DDR4 2133 R-DIMM 15-15-15
16GB TS2GHR72V1CL DDR4 2133 R-DIMM 15-15-15
16GB TS2GHR72V4CL DDR4 2400 R-DIMM 17-17-17

The Transcend modules are available in Europe

By the way: If you use Nexus + A9x14 you can use normal RAM.


I se this are VLP Memory ( Very Low Profile ) , UDIMM i seen more and are the same size.

What are the differency between VLP and UDIMM ??
 
Question- out of ANY GTX 1080, what would be the best one for cooling? Is there a specific 1080 that has better cooling (and of course will fit) ?

I use the Asus Strix 1080, it doesn't break a sweat in the case with an over clock. I think i've only seen max of 70 celcius and it wasn't even that loud.

Now the c7 cpu cooler is another story, this thing is loud in this case, sounds like a jet engine. Using AiSuite though helped me tame the fan noise until I try something else.
 
Low Profile DDR4:

Super Talent

4GB F21VEA8GS DDR4 2133 R-DIMM 15-15-15
8GB F21VEA4GS DDR4 2133 R-DIMM 15-15-15

Transcend
4GB TS512MHR72V1HL DDR4 2133 R-DIMM 15-15-15
8GB TS1GHR72V1HL DDR4 2133 R-DIMM 15-15-15
16GB TS2GHR72V1BL DDR4 2133 R-DIMM 15-15-15
16GB TS2GHR72V1CL DDR4 2133 R-DIMM 15-15-15
16GB TS2GHR72V4CL DDR4 2400 R-DIMM 17-17-17

The Transcend modules are available in Europe

By the way: If you use Nexus + A9x14 you can use normal RAM.

Most of those are registered memory though AFAIK they won't work on any normal desktop board.
 
Great photos and build sldr ;)

Can I ask you two questions? :p

What camera do u use?

The bag under the case is a bag of a proyector?

Thankyou so much and sorry for the inconveniences :shy:

iPhone 7 Plus and it's a protective cover for a Dell TFT monitor, nothing special...
 
danurv:
You can reduce the noise very heavily by replacing the C7 with a smaller cooler, like the LP53+NF-A9x14, K129+NF-A9x14, or NH-L9i. I had both, the Noctua NH-L9i and the Cryorig C7. The difference in noise is HUGE.
 
Low Profile DDR4:

Super Talent

4GB F21VEA8GS DDR4 2133 R-DIMM 15-15-15
8GB F21VEA4GS DDR4 2133 R-DIMM 15-15-15

Transcend
4GB TS512MHR72V1HL DDR4 2133 R-DIMM 15-15-15
8GB TS1GHR72V1HL DDR4 2133 R-DIMM 15-15-15
16GB TS2GHR72V1BL DDR4 2133 R-DIMM 15-15-15
16GB TS2GHR72V1CL DDR4 2133 R-DIMM 15-15-15
16GB TS2GHR72V4CL DDR4 2400 R-DIMM 17-17-17

The Transcend modules are available in Europe

By the way: If you use Nexus + A9x14 you can use normal RAM.


ECC memory all those. won't work on asus STRIX z270i ... :(
 
AFAIK the ECC-feature won't work, but you still have a chance that UDIMM ECC sticks can be used without the ECC feature. With RDIMM and RDIMM ECC you don't have this chance. I hope I'm not speaking rubbish :D
 
Back
Top