DAN A4-SFX: The smallest gaming case in the world

so for me and anyone else who got the c7 should we return it and get the NH-L9i?

Not necessarily - There's a "plan B" - C7 feels kind of perfect for putting 140mm slim fan on top of its radiator since it is taller than standard memory. It should be easier to mount such fan on top of radiator rather than hanging it in the air. A4-SFX doesn't have hard drive mount above the motherboard so 140mm slim fan will definitely fit while with Sentry I'll have to figure this out whether it'll be 120 or 140mm.

Question remains if you'll have problem with mounting it on your Skylake/KabyLake cpu - if that happens Cryorig may provide some solution for you, otherwise just return it and take NH-L9i or wait for some LP53 test results either in Sentry or A4-SFX.
 
So here are some words from me to the topic cooling and noise level:

Some users found out that the distance between FAN and site panel should be 0.5-1cm to not have air turbulences.
These air turbulences make noise. I think there are three options for different types of users that will be the best practice.


1.) Noctua L9i with default A9x14 FAN (default User)

+ easy implementation
+ silent ( very low air turbulences)
+ good temperatures
- no overclocking


2.) Cooltek LP53 with A9x14 FAN (Advanced User)

+ silent ( very low air turbulences)
+ 7°C better temps as L9i
+ small overclocking space
- expansive
- you have to mount the fan with zip ties


3.) Nexus Low 7000 R2 with Noctua A9x14 FAN or Prolimatech Ultra Sleek Vortex 12 (Modder)

(You have to mount the fan under the heatsink and mod the retention kit)

+ 15-20°C better temps as L9i
+ great overclocking space
+ silent ( very low air turbulences)
- expansive (import from US)
- you have to mod it


So if somebody seriously plan to overclock pick solution three.

Some pictures of the Nexus MOD (I will offer a How-to on www.dan-cases.com in some weeks:

6029044647f239687268bddfd26a7aad.jpg

8d81343ff22b5ec3376ea0ef66737bad.jpg
 
Dondan how high are the motherboard stand-offs on the A4?
I was thinking about replacing the 5mm ones (if they are) with 4mm ones (or grind them down) to gain the extra mm needed for a modded AXP 100 with an A9x14 under it. Of course that would mean the I/O shield would no longer fit properly but I can live without one (or mod it).
The Nexus cooler is very hard to get in Germany (unlike the Thermalright) and I generally had only very good experiences with Thermalright (both in terms of performance and in terms of support).
 
People in kickstarter are commenting the address formatting is incorrect. Is that the case for you? Just wondering.

NVM! Just saw DAN's update:

"In the confirmation E-Mail that includes the tracking link and the address, the street name and street number is in the wrong format. On the shipping label it has the correct format. For some countries (like Germany) the street number is after the street name. The E-Mail is in the German format. So don't send me a message that your address is wrong, on the shipment label it is correct."
 
Any update on US shipping? I hope you can get them out this weekend so they'll arrive in the next 2 weeks.
 
I
Dondan how high are the motherboard stand-offs on the A4?
I was thinking about replacing the 5mm ones (if they are) with 4mm ones (or grind them down) to gain the extra mm needed for a modded AXP 100 with an A9x14 under it. Of course that would mean the I/O shield would no longer fit properly but I can live without one (or mod it).
The Nexus cooler is very hard to get in Germany (unlike the Thermalright) and I generally had only very good experiences with Thermalright (both in terms of performance and in terms of support).

just found this Phantek cooler which should also work.
 
Damn now we need to find out if the Nexus, the Thermalright or the Phantek performs better. I'm kind of partial to Thermalright because of the reasons mentioned before but if there are significant performance differences...
 
I


just found this Phantek cooler which should also work.

I bought one of those. A slim (12mm thick) 120mm fan fits underneath the fins and the whole package should fit in the A4, but I don't have the case yet or motherboard to know for sure. I think RAM clearance with an underslung fan might be an issue.
 
I just found this Phantek cooler which should also work.

Damn now we need to find out if the Nexus, the Thermalright or the Phantek performs better. I'm kind of partial to Thermalright because of the reasons mentioned before but if there are significant performance differences...

Dondan already tested that cooler with Scythe 120x12mm slim fan, see post #2173, which didn't perform quite well.
 
Last edited:
Case arrived yesterday (UK), quickly transferred an existing build over and managed to span some quick photos.

Gear
i7 6700
Cryorig C7
Asus Z170i
16GB Corsair Vengeance 2400 MHz
Silverstone SX500-LG
EVGA GTX 970 FTW
512GB Samsung SM951, M.2 PCIe 3.0 NVMe SSD
2X SanDisk Ultra II 480GB

nCwWHV9.jpg

Up and running

czUsDyu.jpg

Not seen many builds posted with a SFX-L PSU

x0Dkj67.jpg

Plenty of room

Overall Impressions
Really happy with the case, fantastic quality and the designed tolerances for components is perfect, great gob Dan! Might have to order one in silver in the future!

Build it's self was pretty quick and simple, the included manual was also excellent, probably took around a hour most of which was planning and attempting cable management. Having a SFX-L PSU is somewhat of a pain as it give's you a lot less room to work with, it does fit much better than the M1 though and i'll probably be ordering some custom length cables which will make the cable management a lot simpler.

Temps
The 6700 idles around the mid 30's with the C7, highest I've had it was 77. GTX 970 idles around 58 without the fans. Some quick stress testing with firestrike got it to a high of 79.

Noise
As most people have figured the C7 is way to noisy due to the low clearance from the sidepanel, without the sidepanel its perfectly acceptable and I'm pretty impress with it as a cooler considering its size. I've already ordered a Noctua L9i.
 
Last edited:
Is this a joke? So you make a hole, put stand-offs and screw a randomly cut glass piece on top?

This has to be the worst side panel idea i have yet to see. By far.

Even more so because the glass? panels dont even resemble the shape of the case.

Jeeez christ. A complete disgrace

this might be the most disgraceful comment I've ever read on a forum
 
Damn that modded cpu cooler is really intriguing. I'm happy i haven't purchased my noctua l9i yet!
 
this might be the most disgraceful comment I've ever read on a forum
+1 guy has no class at all
so you don't like it, no need to be rude about it. I see you in all the sff threads spouting off and being rude not constructive and so I ask again; since you seem to know better, whens you sff case coming out?

and dan I like the panels and how the glass angles match the pull tabs at the back.
Don't listen to that guy, hes a douchecanoe. It looks good except for the screws which you might want to go with something a bit more professional otherwise its damn good, no idea wtf he was talking or have up his butt.

Am i the only one who is using the case as an excuse the upgrade the hardware :D? I have to swith my Sapphire 390 against an other graphic card because its too big :( never thought thats a thing :D
LOL I got a good deal on a GTX 1080 and didn't realize it was little too big for NCase and others but found it will fit in the Dan4, too bad I missed the FEB 1st drop.

Probably gonna have to put it in RVZ02 for while till I can get my hands on this bad boy.
 
Last edited:
+1 guy has no class at all

Don't listen to that guy, hes a douchecanoe. It looks good except for the screws which you might want to go with something a bit more professional otherwise its damn good, no idea wtf he was talking or have up his butt.


LOL I got a good deal on a GTX 1080 and didn't realize it was little too big for NCase and others but found it will fit in the Dan4, too bad I missed the FEB 1st drop.

Probably gonna have to put it in RVZ02 for while till I can get my hands on this bad boy.
are you calling me or prava a douchcanoe? ive been banned for spelling douchebag so tread carefully....
 
So here are some words from me to the topic cooling and noise level:

Some users found out that the distance between FAN and site panel should be 0.5-1cm to not have air turbulences.
These air turbulences make noise. I think there are three options for different types of users that will be the best practice.


1.) Noctua L9i with default A9x14 FAN (default User)

+ easy implementation
+ silent ( very low air turbulences)
+ good temperatures
- no overclocking


2.) Cooltek LP53 with A9x14 FAN (Advanced User)

+ silent ( very low air turbulences)
+ 7°C better temps as L9i
+ small overclocking space
- expansive
- you have to mount the fan with zip ties


3.) Nexus Low 7000 R2 with Noctua A9x14 FAN or Prolimatech Ultra Sleek Vortex 12 (Modder)

(You have to mount the fan under the heatsink and mod the retention kit)

+ 15-20°C better temps as L9i
+ great overclocking space
+ silent ( very low air turbulences)
- expansive (import from US)
- you have to mod it


So if somebody seriously plan to overclock pick solution three.

Some pictures of the Nexus MOD (I will offer a How-to on www.dan-cases.com in some weeks:

6029044647f239687268bddfd26a7aad.jpg

8d81343ff22b5ec3376ea0ef66737bad.jpg
Where in US can i buy it ?? Nexus Cooler

Dont find it on Ebay wordwide.
 
Not necessarily - There's a "plan B" - C7 feels kind of perfect for putting 140mm slim fan on top of its radiator since it is taller than standard memory. It should be easier to mount such fan on top of radiator rather than hanging it in the air. A4-SFX doesn't have hard drive mount above the motherboard so 140mm slim fan will definitely fit while with Sentry I'll have to figure this out whether it'll be 120 or 140mm.

Question remains if you'll have problem with mounting it on your Skylake/KabyLake cpu - if that happens Cryorig may provide some solution for you, otherwise just return it and take NH-L9i or wait for some LP53 test results either in Sentry or A4-SFX.

Thanks for this. So is the idea they can run at lower RPM, so the turbulence issues won't be as apparent?

I don't think I have ever hemmed and hawed so much about a CPU cooler purchase! The Thermolab takes over a month to get to the US and is super expensive, same with the Nexus. Also unsure about RAM clearance.
 
Last edited:
...
3.) Nexus Low 7000 R2 with Noctua A9x14 FAN or Prolimatech Ultra Sleek Vortex 12 (Modder)

(You have to mount the fan under the heatsink and mod the retention kit)

+ 15-20°C better temps as L9i
+ great overclocking space
+ silent ( very low air turbulences)
- expansive (import from US)
- you have to mod it


So if somebody seriously plan to overclock pick solution three.

Thermalright it is then I guess

A "buy in Europe-friendly" alternative to the Nexus would be fantastic! Anyone playing aorund with this, please post updates ;)
 
Thanks for this. So is the idea they can run at lower RPM, so the turbulence issues won't be as apparent?

I don't think I have ever hemmed and hawed so much about a CPU cooler purchase! The Thermolab takes over a month to get to the US and is super expensive, same with the Nexus. Also unsure about RAM clearance.

Does this mean you actually found a source for the Nexus?
I wanted to buy it via eBay (65$ shipping included) and then someone bought it just a minute or so before me (I already started to fill out payment details!)

I am almost sure someone here just bought the Nexus cooler I wanted to buy xD (eBay link for reference)
I am still determined to test all highend coolers options. This is why I just bought some more, with the money I spent on coolers already I could buy quite a decent processor (i5-7600K or better)
 
As an eBay Associate, HardForum may earn from qualifying purchases.
are you calling me or prava a douchcanoe? ive been banned for spelling douchebag so tread carefully....
I think someone might want to report you for spelling it once again so be careful :D

Thanks for this. So is the idea they can run at lower RPM, so the turbulence issues won't be as apparent?
Yes, that's right and also the fact that with slim fan you might be able to increase the distance from the case cover/inlet:

2cqwdwX.jpg


It looks like C7's fan might take around 16mm while you can get slim fans that are 13mm so the gap will increase from 1mm to 4mm and that's a significant change. I don't have the C7 on me now, Zombi has it, I'll check it when I can.
 
lol yeah I realized that after I hit post but I wasn't directing at anybody so I'm hoping it slides by....
 
Dondan already tested that cooler with Scythe 120x12mm slim fan, see post #2173, which didn't perform quite well.

True. Dondan, can you say if the Scythe fan was drawing through or blowing through the fins? Blow through could make performance more competitive with other coolers.
 
Does this mean you actually found a source for the Nexus?
I wanted to buy it via eBay (65$ shipping included) and then someone bought it just a minute or so before me (I already started to fill out payment details!)

I am almost sure someone here just bought the Nexus cooler I wanted to buy xD (eBay link for reference)
I am still determined to test all highend coolers options. This is why I just bought some more, with the money I spent on coolers already I could buy quite a decent processor (i5-7600K or better)

I was looking at the same ebay posting. Now that it's gone, it's almost a relief as I am no longer tempted...
Yes, that's right and also the fact that with slim fan you might be able to increase the distance from the case cover/inlet:

It looks like C7's fan might take around 16mm while you can get slim fans that are 13mm so the gap will increase from 1mm to 4mm and that's a significant change. I don't have the C7 on me now, Zombi has it, I'll check it when I can.

Nice. Looks like Scythe makes a 12mm 120mm fan with a PWM adapter included (Dan used it in an earlier test of the phanteks cooler). I also like the idea of having a bigger fan just in general pushing air around the whole case. Think I might try this...
 
As an eBay Associate, HardForum may earn from qualifying purchases.
  • Like
Reactions: Jspr
like this
Nice. Looks like Scythe makes a 12mm 120mm fan with a PWM adapter included (Dan used it in an earlier test of the phanteks cooler). I also like the idea of having a bigger fan just in general pushing air around the whole case. Think I might try this...

Cryorig and Raijintek have 140 x 13 mm fans that have PWM out of the box.

I literally buyed c7 2 days ago! and i can't return it, i'm so sad now :(

Why you can't return it? You should be eligible to return it for some time with no reason in most countries ranging from 14 days to a month...
 
  • Like
Reactions: Jspr
like this
So here are some words from me to the topic cooling and noise level:

Some users found out that the distance between FAN and site panel should be 0.5-1cm to not have air turbulences.
These air turbulences make noise. I think there are three options for different types of users that will be the best practice.


1.) Noctua L9i with default A9x14 FAN (default User)

+ easy implementation
+ silent ( very low air turbulences)
+ good temperatures
- no overclocking


2.) Cooltek LP53 with A9x14 FAN (Advanced User)

+ silent ( very low air turbulences)
+ 7°C better temps as L9i
+ small overclocking space
- expansive
- you have to mount the fan with zip ties


3.) Nexus Low 7000 R2 with Noctua A9x14 FAN or Prolimatech Ultra Sleek Vortex 12 (Modder)

(You have to mount the fan under the heatsink and mod the retention kit)

+ 15-20°C better temps as L9i
+ great overclocking space
+ silent ( very low air turbulences)
- expansive (import from US)
- you have to mod it


So if somebody seriously plan to overclock pick solution three.

Some pictures of the Nexus MOD (I will offer a How-to on www.dan-cases.com in some weeks:

6029044647f239687268bddfd26a7aad.jpg

8d81343ff22b5ec3376ea0ef66737bad.jpg
Hi, Dan :)

What about installing a AIO CPU-cooler, like the Sliverstone
TD03-SLIM 120 mm rad (http://silverstonetek.com/product.php?pid=598&area=en).
And installing the rad behind the psu if you use a shorter GPU like Gigabyte 1070 mini (http://www.gigabyte.com/Graphics-Card/GV-N1070IXOC-8GD#kf)
or Zotac 1080 mini (https://www.zotac.com/us/product/graphics_card/zotac-geforce-gtx-1080-mini).

There should be enough space behing the psu next to the left sidepanel?
It's pretty tempting if it would work
 
are you calling me or prava a douchcanoe? ive been banned for spelling douchebag so tread carefully....
prava of course, nice mod.. like I said, would probably use different screws (more a long the lines the ones the big manufacturers use on their tempered glass cases)
 
Cryorig and Raijintek have 140 x 13 mm fans that have PWM out of the box.



Why you can't return it? You should be eligible to return it for some time with no reason in most countries ranging from 14 days to a month...

I buyed it second hand (almost 20$ cheaper). I was so happy...
Well i will try smaller standoffs and a slimmer fan until i can foun a Nexus alternative in Europe.
 
Here is fast made drawing how to mod the Nexus Low 7000 R2:

low-7000r2drawing_0xoc4udq.jpg

That seems nice but... I can't find it in europe. And...
1) Does it always have this terrible clips like Intel default ?
2) What about max RAM height with the Noctua NF-A9x14 ?
 
My version don't has the clips. With A9x14 you can use the normal height.
 
Back
Top