MichiganPC
n00b
- Joined
- Aug 19, 2014
- Messages
- 47
Never set one up so I have a lot of newbie questions.
What is the easiest configuration to recover from a drive failure running Win7 or Win10? Is it Raid-1 because each drive is a copy/mirror or is it 5, 6, 10 etc.?
I have a GigaByte GA-880GA-UD3H Rev2.0 board with AMD Athlon II x2 240e CPU. The board has 6 Sata-3 6Gb/s and 2 Sata-2 3Gb/s.
Can you setup RAID and non raid drives on the same controller; the Sata-3 in this case?
Can the OS drive be on this controller or is that what the 2 Sata-2 port are for?
I assume with hardware Raid the pair of drives need to be identical. Will Raid also pool the drives assuming there are 4? And would all these drives need to be identical or just the pairs?

What is the easiest configuration to recover from a drive failure running Win7 or Win10? Is it Raid-1 because each drive is a copy/mirror or is it 5, 6, 10 etc.?
I have a GigaByte GA-880GA-UD3H Rev2.0 board with AMD Athlon II x2 240e CPU. The board has 6 Sata-3 6Gb/s and 2 Sata-2 3Gb/s.
Can you setup RAID and non raid drives on the same controller; the Sata-3 in this case?
Can the OS drive be on this controller or is that what the 2 Sata-2 port are for?
I assume with hardware Raid the pair of drives need to be identical. Will Raid also pool the drives assuming there are 4? And would all these drives need to be identical or just the pairs?