Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Absolutely yes. Traditional emulsion paste between die and IHS is no better than what Intel uses. The big temp advantage from delidding comes from using liquid metal, which is closer to the solder that Intel should have used. I would suggest to read the Delid Club Guide thread on OCN, but it's two thousand pages long now and very hard to find the important tests and comparisons in between the random discussion.
Important to note that while CLU is great under the IHS (nickel to glass), that you shouldn't put CLU under the Apogee Drive II, it gets absorbed into the copper and can harden.
There will be reference 970s coming soon from EVGA, but it's not a hot card anyway, so cards with axial fans should be fine.
Yep, CLU or CLP will give you better temps that makes the delidding worth it.So would I get much better temps with CLU? Or would it be a defective pump?
So would I get much better temps with CLU? Or would it be a defective pump?

Previous temp: 68C while folding at 4.2GHz @ 1.112V (single AX120 rad)
Temp after delid: 59C after 10xIBT at 4.5GHz @ 1.24V (single AX120 rad)
CPU-Z validation of max OC: http://valid.canardpc.com/2836887
Can't tell from the video.. is she using stick-on felt or rubber?
That's a really good idea. I still have a sheet of the stick-on felt (from trying to silence rattles in my car's interior) that I bought at a local craft store.. not sure where to get stick-on rubber, though.
From what you wrote I can't see any reason the pump is faulty. I suggest not running it at 4500rpm for extended periods, 1500rpm should be sufficient.
CLU under IHS will certainly help with temperatures. Only a thin layer needed. Here's my very messy application. My four year old could have done it neater. But it works fine and still liquid after 15 months.
Edit: here's what I wrote at the time
Hey Siba out of curiosity, were u able to get the MSI GTX 970 Gaming 4g to fit without the waterblock?
Also, what software do people normally use to monitor temps?
Please note that the top and side filters can also be installed on the inside of your case.
Is there any free shipping for CA? I was about to check out for $35+ but the shipping cost pretty much kills it for me ($50 total).
DemciFlex is based in South Africa: two oceans and ten thousand miles from California. Fifteen bucks postage is cheap, considering![]()
Oh daym!Did not even bother checking that. I just assumed it was a U.S. company or at least they have a warehouse here XD
Also, what software do people normally use to monitor temps?
I don't see a good way of mounting the bundled filters on the outside-bottom of the case when having fans in the inside fastned through the same holes. Am I missing something?
You know the DemciFlex NCase M1 filter set is also available at FrozenCPU and PerformancePCs as well. But it seems shipping from NY / FL is similarly priced as from another continent!
One question though, how and where do I put these mesh grills?
The included filters are attached by screwing them in with the fans, inside the fan bracket and/or on the bottom of the case. The metal grilles are mounted the same way and are useful if you need to keep cables away from the fan blades, or if you're using the Demciflex filters on the side (they can get sucked in slightly and rub the fan hub).I am 100% sure this have been covered more than once already but trying to search for it in this huge thread is almost impossible:
I don't see a good way of mounting the bundled filters on the outside-bottom of the case when having fans in the inside fastned through the same holes. Am I missing something?
The square 120mm Demciflex filters are the 'official' ones I designed for the case, along with the 80mm filter for the Silverstone SFX PSUs. The other filters were someone else's custom order that a few people wanted so they had Demciflex offer them. You're correct that they don't leave room for the screws, which is why mine aren't designed that way.It seems that the that DemciFlex has different filters than the ones you buy at FrozenCPU or PerformancePC. The former has the one piece filters that are 250x120mm, while the latter carry the 5 piece set that have the 120x120mm filters. Not sure why they have different ones, but the longer filters do no have space for the screws.
The square 120mm Demciflex filters are the 'official' ones I designed for the case, along with the 80mm filter for the Silverstone SFX PSUs. The other filters were someone else's custom order that a few people wanted so they had Demciflex offer them. You're correct that they don't leave room for the screws, which is why mine aren't designed that way.