wasserkool
Limp Gawd
- Joined
- Sep 11, 2005
- Messages
- 346
So I am trying to configure two Intel 510 SSDs in RAID 0 on my gigabyte 990fxa-ud7 motherboard that has the AMD SB950 chipset.
There are altogether 6 SATA 6.0 gbps ports on the motherboard that is controlled by the AMD chipset. But the motherboard will fail to book if I enable RAID with the following setup:
P = Port
p1 - Intel SSD
p2 - Intel SSD
p3
p4 OCZ MaxIOPS - My windows Boot drive.
p5
p6
I am guessing the built in chipset RAID functionality does not allow you to mix and match drives? Does it mean that if I want to run RAID 0 off the AMD chipset the remaining port must be unused?
There are altogether 6 SATA 6.0 gbps ports on the motherboard that is controlled by the AMD chipset. But the motherboard will fail to book if I enable RAID with the following setup:
P = Port
p1 - Intel SSD
p2 - Intel SSD
p3
p4 OCZ MaxIOPS - My windows Boot drive.
p5
p6
I am guessing the built in chipset RAID functionality does not allow you to mix and match drives? Does it mean that if I want to run RAID 0 off the AMD chipset the remaining port must be unused?