Slow boot due to Hot swap?

1st Sgt. Burke

Limp Gawd
Joined
Nov 1, 2004
Messages
436
I recently purchased a gateway FX6800 from TD. I got it refurbed for $699.00 and will hold me out for at least a year to wait for the x58 mobo prices to coem down and the new line of dx11 cards to come out.
http://www.gateway.com/systems/product/529668210.php

Anway the rig has hot swap drive trays. I took my storage drive out of my old rig and placed it into the hot swap drive.

A. Vista will not recognise the drive at all. The only way to get it to connect is to put the computer to sleep and wake it up, then it auto detecs the drive as if you plugged in a USP drive.

B. If I leave the drive plugged into the bay and shutdown, upon startup the boot time is dramaticly slowed. Id say 30-45 seconds for standard boot, and 2-3 minutes for boot with the drive plugged in the hot swap tray.

I tried to put the drive in the internal hd cage and plug it into the mobo but the same thing happened. slow boot time, and the drive wasnt recognised at all then.

What am I doing wrong? Any help would be appreciated.
 
Ask a mod to move this thread over to the Data Storage subforum. Might get better help over there. Do not make a new thread.
 
Is AHCI enabled in the BIOS?

That's probably the problem with the drives not being recognized when swapped.

AHCI needs installed/enabled which can be a major PITA depending on the OS.


The slow boot is probably because of the boot order in your BIOS.

Go into the BIOS and set the first boot device to be your CD/DVD and the second to your HD.

Eliminate all the rest.
 
AHCI is enabled in the bios, Ill try making sure the boot sequence matches above.

Tried the boot sequence it didnt do any help speed wise.

Im curious my main OS drive is port 5 and my hotswap drive is port 0. Could it be running thru the sataport numbers? and slowing the process despite the boot sequence?

Also as the drive was first used internally as asecondarybackup in a winxp environment would it matter if it was set to AHCI or IDE?
 
Last edited:
Also as the drive was first used internally as asecondarybackup in a winxp environment would it matter if it was set to AHCI or IDE?

If you have an OS on that drive, that's the reason for the slow boot and AFAIK there's nothing you can do about it.
 
Prob a little late to this thread, but was doing some research on my gateway FX6800, good system, just wish it had a better BIOS.

As for the answer to your question, it's a KNOWN default from gateway with the hotswap drives. If you search around some other forums there's been a few people having some luck, but much like you the hot swapping drives don't work on mine either.

If I come across the exact info on it in the next few days I'll put the link up here for ya.
 
Back
Top