Thermaltake Shows Off Level 10 at Computex

That can not be fun to watercool. Perhaps full submersion would look neat.
 
So it appears that all the cables run through the primary vertical "base" of the case? It seems like that might cause a problem with cable length on some things.
 
Looks like some piece of pseudo technology from the set of a sci-fi movie.

I like it, don't know if I'd buy it though.
 
Holy smokes that looks ugly as hell to me, and I own a bulky Antec 900. The little HTPC vase from early looks a million times better than that monstrosity.
 
It certainly looks swank. I like the carrying handle integrated into the design too. Not so sure about the thermals, those 3.5 inch bays look like they're completely enclosed and I don't like the covers over what I assume are sidepanel fans (airflow wise, they do make the case look cleaner). Maybe if there are some fans on the bottom of the main bay area where they can blow cold air straight up into the video card and motherboard. I'd buy one if it it cost less than 100 bucks, mod the bottom fans myself if I had to :D
 
damn, thing looks like it's 4 feet tall. Maybe they can put a top on it and call it a "computer desk" ;p
 
I love it. Makes me want to build a new system just for the case, hah. I'll definitely get it if it's < $200.

I'll just have to keep a duster nearby, heh.
 
Ugliest case EVER. Horrible design. This makes the Antec skeleton look like Megan Fox, and that case was a sin to begin with. Absolutely horrid.

I wish systems designers would pull thier heads out of thier future-art loving asses and design rectagular, stackable cases again. Cases like this make me wonder how many enthusiasts are really marketing driven tools.
 
That is one pretty badass rig. I mean just look at it with its WIRELESS PSU, who needs a scrub ass power cord when you have one of these cases?
 
the system looks nice.. the cabling doesnt look like it will be that big of a problem in my opinion.. thats what 1 dollar cable extensions are for.. also some one said something about the HDD's being completely enclosed.. they are not.. there is a vent on the bottom of the enclosure.. they are passively cooled by the case as well.. its an interesting design.. probably not something id buy.. but its different and thats all that matters..
 
That's not really as modular as they made it out to be. It's more of a contour case design....
 
Redesign the case style but keep the same basic layout, cause that case looks like a ps2 design reject from the 1980's (if that makes sense to anyone). Also the HDD's don't have enough cooling, there needs to be a fan at the the top exhausting the entire HDD stack, those drives would cook without an AC running in the room. Reminds me of external HDD enclosures that cook drives.
 
also some one said something about the HDD's being completely enclosed.. they are not.. there is a vent on the bottom of the enclosure.. they are passively cooled by the case as well..
Also the HDD's don't have enough cooling, there needs to be a fan at the the top exhausting the entire HDD stack, those drives would cook without an AC running in the room. Reminds me of external HDD enclosures that cook drives.
The HDD's are ACTIVELY COOLED by what looks like a 80mm fan that sits between each HDD compartment inside the structural support that looks like a pseudo passive heatsink. They are very cleverly disguised. The Tech Report pictures don't show them.

Here are some better pics from a different site:
http://www.hitechlegion.com/outside/mpr/766-press-thermaltake-unveils-level-10-computex-2009?start=3

f2.jpg
 
What's the benefit of so much compartmentalization? You're either gonna end up with more fans than a simple 2/3 compartment design, or you're gonna end up with some components suffocating (or a lot of vented panels on what's already a dust nightmare). I'm surprised a BMW design firm had anything to do with that case...
 
Ugliest case EVER. Horrible design. This makes the Antec skeleton look like Megan Fox, and that case was a sin to begin with. Absolutely horrid.

I wish systems designers would pull thier heads out of thier future-art loving asses and design rectagular, stackable cases again. Cases like this make me wonder how many enthusiasts are really marketing driven tools.

Now why do you have to attack Megan Fox?
 
Looks like they vacuum formed the inside of a case. I like it but hate it. I cant do anything to really change it without destroying it.
 
Different for the sake of it, they might have pulled it off with nice materials, but it looks so plasticky,

Actually they should make the bits all primary colors and put lego bumps on them.
 
A separate fan inside each drive bay? Even if they're silent, that's really inefficient imo.
 
I have been scepticle of the practicality of the case and whether or not most hardware will fit or not. I think after seeing the new pics that most hardware will work fine. I dont know about video cards with the power ports on top as appose to ones with the ports on the end. the extra height might be a problem. I also think you may need to invest in a couple power supply cable extensions.

This looks to be a good case for those that move the computer around alot with the handle on top, a great case for lan Parties, not only for portability but for your e-penis.
 
Looks rather large for a LAN party case... Then again, if I was building a rig for a LAN party I'd go with a Shuttle or my old Antec Super Lanboy, the thing is smaller than nearly any other small/mid-tower and it's light as heck, yet it can still fit a 9.5" video card. LianLi A05 is another good small case imo.
 
I'm not a huge fan of the looks, but I really like the idea of moving away from the box design. The only change I would make would be to add a set of vents to the top half of the motherboard enclosure - it looks like the CPU HSF isn't going to get much air with the only intake going right to the video cards.
 
Even after looking at those photo's, I'm still calling it a waste of money. My Antec 900 can spank it any day or night.
 
Everyone in here thinks this case is larger than it actually is. The high camera angle and tiny Asian people in the background are throwing things off.

I think that if anything, you'll end up with cables that are too long with this case. From power supply to motherboard header on most boards is just around the corner. SATA headers to hard drives are right around the corner again. And the power for the hard drives are a short straight run. This is what happens when you put more space behind the motherboard tray and cut holes in the tray for cables to pass through.

Now your hard drives are separate in their own little cooling tower. Your motherboard has its own dedicated fan that doesn't just push hard drive heat onto it. It's a smaller area with less cabling junk in the way. SATA cables are AWESOME.

And the majority of your annoying cable is in its own compartment with no need for cooling.

I think most of you just hate it for not having a window! :p
 
No I hate it because having individual fans for each and every compartment doesn't seem any more efficient to me than having two or three compartments with one intake and maybe two or three exhausts max (including the PSU). /shrug It's gonna rattle like a mofo unless it's very solidly constructed too! :p
 
What is the weight of that case? Doesn't seem to be light. And how would I integrate my watercooling setup? The design is just ugly.
 
I'll reserve judgment until I see some reliable tests of it's cooling performance.That's the true test of a case,can it handle the increasing demands of overclocking and high end graphics cards on a cooling system.
 
Not my type. Not at all. This is the kind of product design you have to build a whole apartment around to make it work visually.
 
Everyone in here thinks this case is larger than it actually is...

From the front and side it's "thinness" makes it look taller, from the back it's clear that it's height and base width are pretty conventional.
 
From the front and side it's "thinness" makes it look taller, from the back it's clear that it's height and base width are pretty conventional.

... I reckon the "flat side" with the cable access behind the motherboard is about the same size as the side panel on a regular atx case.
 
Back
Top