AMD 780G = Nvidia ??? = Intel ???

Potatocodone

Supreme [H]ardness
2FA
Joined
Jun 30, 2008
Messages
4,859
I plan on making another HTPC very soon.

I always been quite fond of the AMD 780G and was curious what is Intel and Nvidia equivalent? I am not really familiar with Intel boards outside of the P35/45 area. And I have absolute no knowledge of nvidia chipsets since the 939 nforce4 days.
 
I plan on making another HTPC very soon.

I always been quite fond of the AMD 780G and was curious what is Intel and Nvidia equivalent? I am not really familiar with Intel boards outside of the P35/45 area. And I have absolute no knowledge of Nvidia chipsets since the 939 nforce4 days.

I was going the same route you did however learned the following: The Nvidia 8200 and 8300 series supports 7.1 channel LPCM over HDMI, the 780G does not. This means you will not be able to get 7.1 channel sound via HDMI from your mobo (780G) if you have a blu ray drive unless you buy a add on card. And lets be honest, if you build a HTPC why wouldn't you put a blu ray player in it? The difference in the boards is at most around 20 bucks...so I would go with the Nvidia 8200 series. I am going with the 8300 series as its just a little bit faster. Link to my board here
 
that 9x00 series board are intel..... more $$


HTPCs do well with AMD x2 CPUs not that they dont do well with intel CPUs but for the price difference...

my HTPC has the BE-2400 X2 and i have no issues with blu-ray disks or anything else i have found... (yet)
 
What about the 9300/9400 series boards?

Exactly as their for AMD counterparts: They can provide 7.1 channel LPCM through HDMI as well as offload the decoding of HD content. So great options for a HTPC if you want to stick with Intel CPUs.

SO basically:
8200 = 9300
8300 = 9400 (Slightly faster version of the 8200/9300)
 
I was going the same route you did however learned the following: The Nvidia 8200 and 8300 series supports 7.1 channel LPCM over HDMI, the 780G does not. This means you will not be able to get 7.1 channel sound via HDMI from your mobo (780G) if you have a blu ray drive unless you buy a add on card. And lets be honest, if you build a HTPC why wouldn't you put a blu ray player in it? The difference in the boards is at most around 20 bucks...so I would go with the Nvidia 8200 series. I am going with the 8300 series as its just a little bit faster. Link to my board here
Edit: My mistake, I thought 780G could do 5.1 LPCM. Stereo only.

Performance-wise, 780G trumps 8x00 with most codecs (properly configured, of course).
And anyway, the new 9300 beats both, so it's all a moot point unless you're set on AMD.
 
for gaming... the 9x00 perform much better..... limited gaming anyways but for video play back they are all but equal
 
Edit: My mistake, I thought 780G could do 5.1 LPCM. Stereo only.

Performance-wise, 780G trumps 8x00 with most codecs (properly configured, of course).
And anyway, the new 9300 beats both, so it's all a moot point unless you're set on AMD.

I looked at Intel and while the performance is there the cost to performance ratio isn't. I can get a decent x2 chip for around 59 bucks while the cheapest Core 2 Duo runs 119. :D
 
For an HTPC, you don't need a Core2Duo. Even a Pentium Dual Core will be fine.
And you may not have checked the right places- even an e7400 can be had for $100 at MicroCenter, and there are plenty of dual-cores below that.

http://www.microcenter.com/single_product_results.phtml?product_id=0301967

http://www.bit-tech.net/hardware/cpus/2008/12/22/athlon-x2-7750-vs-intel-e5200-oc-review/4
http://www.bit-tech.net/hardware/cpus/2008/12/22/athlon-x2-7750-vs-intel-e5200-oc-review/6
Depending on the application, the e5200 can be considered anywhere between an x2 5000 and an x2 6400. It is never slower than a 5000, though.
 
For an HTPC, you don't need a Core2Duo. Even a Pentium Dual Core will be fine.
And you may not have checked the right places- even an e7400 can be had for $100 at MicroCenter, and there are plenty of dual-cores below that.

http://www.microcenter.com/single_product_results.phtml?product_id=0301967

http://www.bit-tech.net/hardware/cpus/2008/12/22/athlon-x2-7750-vs-intel-e5200-oc-review/4
http://www.bit-tech.net/hardware/cpus/2008/12/22/athlon-x2-7750-vs-intel-e5200-oc-review/6
Depending on the application, the e5200 can be considered anywhere between an x2 5000 and an x2 6400. It is never slower than a 5000, though.

I stand corrected. Thanks for the info..now I go back to spec'ing out yet another chipset & mobo configuration..lol :(
 
E5200 is a great bang for the buck CPU. I had mine running at 3.9-4.0Ghz on a Foxconn mATX board. I'd probably go with that over the E7XXX for the money.
 
Back
Top