Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Assuming you're hooking it up to computer speakers I'd grab these two cables from monoprice:
http://www.monoprice.com/products/p...=10231&cs_id=1023104&p_id=2404&seq=1&format=2
http://www.monoprice.com/products/p...id=1021804&p_id=666&seq=1&format=1#largeimage
The second one wouldn't work because the adapter you linked has a male 3.5mm end and computer speakers also have a male 3.5mm end.
Thank you. I too have a NEC LCD 2690 and am considering getting a PS3. You made it clear what video cable I will need but I remain confused what audio cable I will need.
Could you please look at the Back View (Amplifier) photo of my speaker amplifier.
http://www.targetpc.com/hardware/audio/speakers/videologic_crossfire/index3.shtml
Am I right that I will need to connect an audio cable from the PS3 to the Red and White Input 2 connectors on my amplifier? Note that those two input connectors are female RCA jacks.
Can someone please point me to the appropriate cable that I should get?
Thanks!
Hey,
Those speakers were legendary back in the day. Nice.
10e
Good to know that 10e - thanks!You can get stereo using the as-shipped A/V cable that comes with the PS3 by connecting it into the left/right channels of the amplifier.
10e
Hey, so what happened with the PS3 + Nec 2690wuxi?
I was thinking of doing this myself.
were you forced to use 1280x720?
I thought I read that in the manual
Thanks
Hey, so what happened with the PS3 + Nec 2690wuxi?
I was thinking of doing this myself.
were you forced to use 1280x720?
I thought I read that in the manual
Thanks
I have the same problem.
I use 2690 as a PC monitor. After re-installed the XP SP3 (formatted C: during installation), I just installed the driver of 2690 and the driver of display card, my display card is ASUS EN7900GTX/2PHT/512M, with HDCP compliant. I use DVI-D to connect display card and 2690.
I set the resolution is 1920x1200.
If the HDCP of 2690 is "OFF", everything is ok. But if I changed HDCP to "ON", and restart the computer, the resolution of 2690 was forced to 1280x720, and the driver of 2690 lost, it became to "default monitor" (something like that, because my OS is not English).
Please help me to figue out this problem.
According to 10e, this my be the problem of display card working on interlaced mode. If so, how can I set the display card to De-interlaced mode.
Sorry for my poor English.
Thanks a lot.
I bought a PS3+MGS4 bundle. Also picked up Planet Earth Blu-ray
Works well but the picture seems too bright even after changing the settings in the PS3 to full HDMI (something like that).
It seems to ramp up the brightness for games. Movies look great.
BTW, any suggestions on what to calibrate the monitor to for PS3? 6500k + NTSC gamma sound right? Or should I use SRGB or 2.2? (thankfully the 2690wuxi has hardware calib for each input!)
Hey howd did it go did you hook up the ps3 yet? any pics of the screen quality co im really interested in this monitor