Q9450 TjMax=85 for Correct Temps!!!

Blk02

Limp Gawd
Joined
Feb 19, 2008
Messages
183
Intel Q9450
Lian Li PC-B25B Case
OCZ Vendetta 2 HS (OCZ Freeze TIM)
Real Temp 2.5
Idle at 2003.8 Mhz
VID = 1.15

Ambient Temp = 22.78C (Approx. 73F)
TjMax 95 = 40C across all cores
TjMax 85 = 29C across all cores

I set my TjMax to 85 in Realtemp and my temperatures seem to be in line now. I am at 29C accross all cores on my Q9450 (computer is idle and running at a reduced speed of 2003.8 Mhz). These temps seem correct for this processor and reduced Mhz.

With TjMax set at 95 I was running at 40C across all cores with the computer idle at 2003.8Mhz. This seems too high especially when I am using one of the best air coolers (OCZ Vendetta 2), 45nm processor, HS is properly seated, and the Mhz is reduced.

Let me know what you think!!!
 
TJ.Max of 95c is correct.

tempht1.jpg
 
What is your ambient? A zero load processor should be approx. 6C over ambient. Your idle temps look way to close to a standard ambient temp to be realistic. Unless you have a 67F ambient temp.

What is your prime95 load temp at 1 hour for all 4 cores?

Ahh, I see your fan speeds damn those things are cranking for an idle cpu. Mine are at 800 CPU and 900 for chassis. Those monster fan speeds might explain your extremely low temps. What case are you using?

I know many Q9450 owners are reporting 40C idle temps with TjMax at 95. Most have ruled out 100 and 105 TjMax altogether. There are some 45nm C2D that have a TjMax of 85 in Real Temp, which leads me to believe 85 might be reasonable for a Q9450.
 
my temperatures seem to be in line now.

These temps seem correct

So basically it's all guesswork on your part and you really have no idea how accurate you are as far as your TjMax setting...

And you are using what as your basis for comparison as to what seems correct? Another chip you used or others experiences with chips that also used TjMax values that were mostly guesswork?

Pure science here folks.

Look I don't mean to be rude but there is plenty of confusion surrounding this issue already, let's make sure we know what we're talking about before we clutter things up any more, alright? :rolleyes:
 
I would like to know what your ambient temps are and what fans you’re running.

I just want to find out more information about your setup so I can compare and contrast against my own setup.

As far as I know the best temp results for the Q9450 come from custom calibration of Real Temp using the steps on their website. Using a thermal gun is another option, but many people do not want to run their processor without a heat sink so they can retrieve an accurate temp reading.

If you have some other source of information please share and do not criticize. I want a discussion not a bashing thread! I apologize if I seemed rude, but I would like to know more about your setup and what parameter changes you have made to the monitoring programs you use.

The temps you’re running at are extremely rare and I would like to know how you achieved those temps. TIM application method, case type, ambient temp, fan type, etc.
 
I would like to know what your ambient temps are and what fans you’re running.

I just want to find out more information about your setup so I can compare and contrast against my own setup.

As far as I know the best temp results for the Q9450 come from custom calibration of Real Temp using the steps on their website. Using a thermal gun is another option, but many people do not want to run their processor without a heat sink so they can retrieve an accurate temp reading.

If you have some other source of information please share and do not criticize. I want a discussion not a bashing thread :D! I apologize if I seemed rude, but I would like to know more about your setup and what parameter changes you have made to the monitoring programs you use.

The temps you’re running at are extremely rare and I would like to know how you achieved those temps. TIM application method, case type, ambient temp, fan type, etc.
 
I'm gonna pick a number from 70 to 100...

*boom* that's my Tjmax! My temps are accurate now!

rofl copter x4
 
I'm gonna pick a number from 70 to 100...

*boom* that's my Tjmax! My temps are accurate now!

rofl copter x4

Isnt that how Core Temp and Real Temp ended up with two different TjMax settings? There is no way to know for sure because Intel has not released the values.
 
Isnt that how Core Temp and Real Temp ended up with two different TjMax settings? There is no way to know for sure because Intel has not released the values.

No, just picking something until it "seems correct" is NOT how either CoreTemp or RealTemp ended up with two different values.
 
Looking at most of your temps, they are inline with a room under 20C ambient.
If your ambient is that or a bit lower, things look ok.
Discard the 7C CPU figure.

Realtemp will report TjMax without intervention.
If you have changed this value in the .ini file, delete the line.
 
How is he getting freaking 25C? Is it like someone said earlier, ambient temps of 20C? That is like 67F Ambient, pretty darn cold. The temps on my CPU with an ambient temp of about 77-78 is 37-40 at idle.


Another thing that I noticed, is Everest as acurate as Realtemp? Botj of them are showing about the same temps...
 
Lets see what the OP says about his room temp before going nuts on the issue.
Realtemp is as close to accurate is he will get without using external sensors (calibrated).
None of the temps are guaranteed correct anyway, especially at lower temps.
 
Maxing out my case and CPU fans I get (95 TJ):
Heatsink is TR ultra-90 with AS5
Room temp 20C
MB - 26
LGA Socket - 27
Cores - 42,32,42,35 (probably uneven base but too lazy to lap)

X3350
 
Lets see what the OP says about his room temp before going nuts on the issue.
Realtemp is as close to accurate is he will get without using external sensors (calibrated).
None of the temps are guaranteed correct anyway, especially at lower temps.

I was talking about mullet's reply.
 
How is he getting freaking 25C? Is it like someone said earlier, ambient temps of 20C? That is like 67F Ambient, pretty darn cold. The temps on my CPU with an ambient temp of about 77-78 is 37-40 at idle.


Another thing that I noticed, is Everest as acurate as Realtemp? Botj of them are showing about the same temps...

This is exactly my point. I have never seen temps like mullet's before and I would like to know how he achieved those temps. My Q9450 temps are right at 40C at idle in Real Temp. From all the reading I have done on other forums 40C seems to be the average number for Q9450 idle temps in Real Temp. (Mullet please come back to explain???:D)
 
One thing I noted is that the pics show ~25C idle, while his sig clearly states 34C... so which is it... this is regarding mullet's post, of course.

The plot thickens...
 
So, with TJ Max at 85c and my cores averaging 67c Temp to Max in Real Temp, I'm running at... 18c (64f)?. This is astounding considering my ambient temp is somwhere around 23c. My low-end water cooling is nothing short of amazing and defies the laws of thermaldynamics! Money well spent!

TJ Max is at or around 95c -full stop-
 
So, with TJ Max at 85c and my cores averaging 67c Temp to Max in Real Temp, I'm running at... 18c (64f)?. This is astounding considering my ambient temp is somwhere around 23c. My low-end water cooling is nothing short of amazing and defies the laws of thermaldynamics! Money well spent!

TJ Max is at or around 95c -full stop-

Harmattan,

What are you temps with your water cool system? My ambient temps are 25C and I'm getting around 37-39 on the cores at idle.
 
With ambient around 22-23c, cores average 28c idle (RealTemp reports 95 TJ Max - 67 Temp to Max) and 41-43c load. I'm OC'ed to 3.280ghz @ 1.23V

uGuru reports 31-32c idle, but it's somewhere around there.
 
Well then, something is up with my system then. Unless my sensors are bad. I know why. Maybe will have to reset my heatsink.
 
Looking at most of your temps, they are inline with a room under 20C ambient.
If your ambient is that or a bit lower, things look ok.
Discard the 7C CPU figure.

Realtemp will report TjMax without intervention.
If you have changed this value in the .ini file, delete the line.

Bingo! My room temp is 20 to 21c = 70F. I also have a case with good air flow. I had 34c in my sig because it was when I was using the OLD core temp that had a TJ.Max of 105c instead of 95c that it should have been with a 45nm X3350 C1 stepping CPU. Here is a pic of my junky case its a little tight on room sorry. I have 5 120mm fans 3 intake 2 exhaust on a fan controller each fan is able to push 80CFM each.

newxj6.jpg
 
Your idle temp readings are likely out a little, maybe up to 3C, they seem a bit low for over just over 20C.
Luckily you can adjust for that in Realtemp.ini if you care.

Add the lines (or similar)
Idle0=3
Idle1=3
Idle2=3
Idle3=3

fyi
With a GA-X38-DS4, idle temp with Realtemp wont go below 42C even with my chip clocked to 1.2GHz and 1.1V.
The software that comes with the motherboard (Easytune Pro) does report very usable values though (idle from 21C @ 1.2GHz and 1.1V, to 36C @ 4.13GHz and 1.4V)
Clearly Gigabyte knows some info about the 45nM temp sensors thats not on general release.
 
Room ambient and case air flow are 2 different things, you can have low room temps but if your case doesn't have good air flow that will increase your cpu temps, If I remove my case door the temps don't go down any more. Right this very second my room temp is 20c and my cpu is 24-25-25-26 so that means there is a 4 to 6c difference in ambient to cpu and thats about right. If I go to my fan controller and drop all my case fans to low my cpu will go to 27-28-28-28. I personally think there right. When I had the P5B Deluxe and a E6600 people said the same thing about my CPU temps in the same case I have now. The whole reason I got this case it there is a ton of room and the fan placement was what I was looking for.

my 2 cents.
 
With screws that just barely fit between the aluminum fins. Not to tight to spread the fins but not to loose to allow the fans to fall off.
 
Back
Top