New Computer Build, What Do ya'll think?

Also note that I said that the 680i chipset is less stable than a P35 mobo. Something you may want to think about.

More reliable? Potentially. More stable, no. Also, my 680i will happily break 500Mhz real (2000Mhz Quad-Pumped) FSB. It does run hot as all hell, but it's a good board. At least it has been for me. I realize many have died on people -- hence the "reliability" bit.

Don't confuse this with my advocating getting a 680i. Unless you're running 1920x1200+ and are willing to get two high end cards (8800 GT (ideally GTS) 512MB or better) immediately, SLI is a bad plan. As an upgrade plan it almost never makes sense.
 
More reliable? Potentially. More stable, no. Also, my 680i will happily break 500Mhz real (2000Mhz Quad-Pumped) FSB. It does run hot as all hell, but it's a good board. At least it has been for me. I realize many have died on people -- hence the "reliability" bit.

Don't confuse this with my advocating getting a 680i. Unless you're running 1920x1200+ and are willing to get two high end cards (8800 GT (ideally GTS) 512MB or better) immediately, SLI is a bad plan. As an upgrade plan it almost never makes sense.

reliable: high degree of certainty and predictability for a desired outcome
stable: resistant to change

I guess the potential reliability issues cause the lesser stability assumption. NF680i SLI is less stable when OC'ing quad cores as opposed to OC'ing dual cores. If you're not OC'ing at all, you shouldn't have any stability issues with any motherboard (just to state the obvious).


That link doesnt work for me. :(

The other parts are great!
 
I get those two words mixed all the time.

But yes, I should be a bit clearer in my description of the 680i chipset.
 
Only if you can answer the following question:

What are you going to replace the sold-out items with?

I'm gonna wait I gotta get an income tax paper filed, and then I'll buy. So I'm sure it will be in by then, and if its not, I'm gonna get the same part of another website.
 
Recommended by others and it will do what I need.

Costs too much. I bet the DFI LanParty P35 Dark (P35-TR2S) at $140 will do everything the DS4 will do and then some. And it'll OC better. No reason to pay more than $150 for a P35 board right now -- even a really high end P35 board. For $200 you can get an X38 and have full bandwidth CrossfireX support.
 
Costs too much. I bet the DFI LanParty P35 Dark (P35-TR2S) at $140 will do everything the DS4 will do and then some. And it'll OC better. No reason to pay more than $150 for a P35 board right now -- even a really high end P35 board. For $200 you can get an X38 and have full bandwidth CrossfireX support.

but i probably won't do any OCing, i want all the life outta my processor i can get.
 
I hate the Thermaltake Armor case. Those flaps on the front are fucking retarded. Not to mention they serve no purpose.

I also didn't care for the Acer monitor. Otherwise it looked pretty good.
 
I hate the Thermaltake Armor case. Those flaps on the front are fucking retarded. Not to mention they serve no purpose.

I also didn't care for the Acer monitor. Otherwise it looked pretty good.

You have recommendations for the monitor and case?
 
Costs too much. I bet the DFI LanParty P35 Dark (P35-TR2S) at $140 will do everything the DS4 will do and then some. And it'll OC better. No reason to pay more than $150 for a P35 board right now -- even a really high end P35 board. For $200 you can get an X38 and have full bandwidth CrossfireX support.

But DFI boards are finicky and if the OP won't be overclocking it isn't worth putting up with the potential bullshit.
 
Yes, I concur.

The P35 chipset runs cooler, OC's higher and is bit more stable than the 680i chipset. It doesn't have SLI capability BUT you don't need SLI since your monitor is only a 22". And you have an ATI card where SLI requires Nvidia cards.

Also, SLI is only worth it if you game at 1920x1200+ and if you're willing to get both Nvidia cards at the same time. So check out a mobo based on the P35 chipset instead. Check back to my first post here for P35 mobos recommendations.

I agree with this for the most part. The P35 chipset based boards tend to be more stable than 680i SLI reference boards and do overclock better.
 
um explain?

DFI boards don't tend to be stable out of the box. They require a lot of tweaking and specific parts to work right. I consider this unacceptable. Especially when other boards overclock 98% as well and sometimes better, and are stable out of the box with a larger variety of hardware.

I don't think DFI tests for compatibility the way ASUS, Intel, abit and MSI or Gigabyte do. Most boards from the other companies I've mentioned will give you FAR less headaches.
 
DFI boards don't tend to be stable out of the box. They require a lot of tweaking and specific parts to work right. I consider this unacceptable. Especially when other boards overclock 98% as well and sometimes better, and are stable out of the box with a larger variety of hardware.

I don't think DFI tests for compatibility the way ASUS, Intel, abit and MSI or Gigabyte do. Most boards from the other companies I've mentioned will give you FAR less headaches.

this is the one i was getting.

This one

acceptable?
 
this is the one i was getting.

This one

acceptable?

The Gigabyte boards have been pretty good over the last year or so. I've been recommending them as an alternative to ASUS for some time. Two years ago or so I called them Gigacrap and Gigajunk because that's what they used to be. I replaced a ton of them in OEM machines that used them. All for stupid problems too. All the ones I've tested though over the last year or so have been solid. I just hate the hideous colors on them.
 
The Gigabyte boards have been pretty good over the last year or so. I've been recommending them as an alternative to ASUS for some time. Two years ago or so I called them Gigacrap and Gigajunk because that's what they used to be. I replaced a ton of them in OEM machines that used them. All for stupid problems too. All the ones I've tested though over the last year or so have been solid. I just hate the hideous colors on them.

so aside from the bad color scheme, do i get a thumbs up to buy?
 
and yeah think the monitor will be ok?

Acer isn't my preference for anything. However I haven't looked at monitors below 24" for some time so others can advise you better than I on that.
 
Yah, I learned how finicky DFI's were with my Ultra-D (ram won't work in yellow slots, but do in orange?!?!? WTF?!?! some quality PSUs don't work well?!?! ) and my friend's Infinity P965. They're great if you like tweaking the hell out of your board and dealing with all the different settings (access to a multitude of settings in the BIOS). Otherwise, any of the other boards will do.

An alternative to the Tt Armor is the CoolerMaster Stacker (TC01, 810, 830, etc). I, too, hate the flaps on the Armor, but you can remove those, IIRC. I went with the original stacker... love all that space.
 
Well after looking I swtiched to the COOLER MASTER Stacker 830. And now have 5, 120mm LED fans. So that should keep things extra cool. One in the front, one in the back, four on the flip out holder and one one the top. The only thing I found odd was, it says in the specs..."Accommodates up to nine 120mm fans" but I really only see 7 places. Where are the other 2?
 
In front. You can fit two more 4-in-3 units above the original module that comes with the case. Those two more modules include a 120mm fan each.

The Samsung is a much better panel than the Acer. But, if all you're doing is gaming, the cheaper Acer or Chimei should suffice. It all depends on you, and how picky you are about color reproduction, etc.
 
In front. You can fit two more 4-in-3 units above the original module that comes with the case. Those two more modules include a 120mm fan each.

The Samsung is a much better panel than the Acer. But, if all you're doing is gaming, the cheaper Acer or Chimei should suffice. It all depends on you, and how picky you are about color reproduction, etc.

ohh i get it, thus sacrificing your optical drives.
 
ok well i just got 2k after my income tax. is all the info in here still a good buy? or has my stuff become obsolete?
 
ok well i just got 2k after my income tax. is all the info in here still a good buy? or has my stuff become obsolete?

What? your list is a month old -- its all obsolete by now! :rolleyes::eek::p j/k
 
Your list is still valid, but I'm going to recommend a few changes.

The DS4 is out of stock at NewEgg, but it's really a moot point. Get the Q6600 and DS4 over at ClubIT; ClubIT has a $20 promo code when you buy the Q6600 and any Socket 775 motherboard there.

Again: Buy Yate Loon fans for your case at Jab-Tech. They're cheaper than the LED fans you chose yet perform just as well.

Since you're not going SLI, you could suffice by going with a 500W-750W power supply. Buy one of the Corsair VX/TX power supplies from Buy.com... the TX650W would provide all of the power that you need.
 
The DS4 is out of stock at NewEgg, but it's really a moot point. Get the Q6600 and DS4 over at ClubIT; ClubIT has a $20 promo code when you buy the Q6600 and any Socket 775 motherboard there.

links?
 
Back
Top