This device cannot find enough free resources that it can use

gta95

Limp Gawd
Joined
Dec 26, 2005
Messages
490
I just installed a new gigabit adapter in my Windows 2003 server. When I first booted up with the adapter, the graphics card reverted to 640x480, 4 colors. As well as both the network card and the graphics card reporting what is said in the topic title. I've tried a different pci socket for the card to no avail. What else should I try?

Edit: Now its giving me error code 10: device can't start. WTF is up with this thing

Edit2: Now I am getting errors on startup saying that services are hanging at start up. I still have no clue wtf is happening.
 
The hardware interrupts and memory input/output (I/O) ranges that the Gigabit adapter can use are already in use by other devices.

Now apparently it has grabbed what it needed but your other devices are having the same issue and services used by those devices cannot start.

You have a classic hardware conflict issue. You can try pulling all cards out and installing them one by one in different orders.

You can try manually assigning an IRQ to your video.

Disable anything in the bios you are not using, serial port, paralled port, IR, unused drive interfaces, floppy controller, etc.

Other than that I dont have a clue.
 
The hardware interrupts and memory input/output (I/O) ranges that the Gigabit adapter can use are already in use by other devices.

Now apparently it has grabbed what it needed but your other devices are having the same issue and services used by those devices cannot start.

1.You have a classic hardware conflict issue. You can try pulling all cards out and installing them one by one in different orders.

2.You can try manually assigning an IRQ to your video.

3.Disable anything in the bios you are not using, serial port, paralled port, IR, unused drive interfaces, floppy controller, etc.

Other than that I dont have a clue.

1-2 Will try later
3. I have disabled all that I can to no avail.

I also have a SATA Raid controller in the system.
 
What are the specs of your server? Please include any other cards you have in the system.

Also check to see if you can update the bios in the system. A BIOS update may fix your I/O problems.
 
What are the specs of your server? Please include any other cards you have in the system.

Also check to see if you can update the bios in the system. A BIOS update may fix your I/O problems.

I'm with him on this. I'm guessing it is a low end board in it.

We had an issue like this with a clients sbs2003 box a few months ago. Someone bought the server for them and went as low end as possible(this was before we did work for them). Has a shitty intel matx desktop board with no graphics card slot. Thought the onboard nic was failing and the board didn't have the resources to let me install another one.
 
Specs

Mach Speed NS2PAP Lite Mobo
Amd Athlon 2500+
768MB Ram
3 HDs, 1 connected to a Sata Raid Card
Geforce 4 MX 4000 Video Card
Zonet Gigabit Lancard
 
Bump before this falls off the page. I'll start trouble shooting again later on tonight.
 
Hardware conflicts in IRQ's ftw. Oh, and bad form to cross post.:(
 
Hmm I would switch mobos, but I already tried that and it didn't work out too well. Tried to go the easy route and do the switch without reinstalling Windows. Come to find out the mobo I was going to use was dead. I had tried a different gigabit card in the server without trouble. The only thing was it could not sustain a connection. I think it had something to do with the drivers.
 
Looks like I got it to work. I just had to disable the onboard network card. I also have an unrelated concern if anyone can answer this. After I updated my server to Server 2003 SP2, I have to have login credentials in order to log in to my locally served homepage. Is there any way I could get rid of this? Also, after the netcard install, my bit torrent on the server stopped working. It loads the peer list, but will not seed or download.

EDIT: Also, sorry for the double posting.
 
Bump before this falls off the page again. Should I make a new thread for my new issue?
 
I'd post a new thread for the new issue. People are less likely to click on this one that would know about that. Personally, I continue to blame everything on poor quality hardware.
 
Looks like I got it to work. I just had to disable the onboard network card. I also have an unrelated concern if anyone can answer this. After I updated my server to Server 2003 SP2, I have to have login credentials in order to log in to my locally served homepage. Is there any way I could get rid of this? Also, after the netcard install, my bit torrent on the server stopped working. It loads the peer list, but will not seed or download.

EDIT: Also, sorry for the double posting.

Look into iis and enable anonymous access to that page.

Are you on a domain? If so you could have some other issues.
 
Back
Top