XP install doesnt recognize HDD but BIOS does.....???

Joined
Feb 16, 2006
Messages
640
I just put together an HTPC from left over parts.

The mobo is an asus K8v deluxe, and the HD is a 200gb WD. I previously ran 2 250gb HDs in stripe on this mobo, but have install the 200gb for htpc purposes. I deleted the old raid config and plugged in the new drive. The system bios recognizes the drives but on XP's install screen, I get

"System could not detect Hardrive. Cannot complete installation"

What could be the problem?
 
Is the hard drive an SATA one?

If so, you have to press F6 and load the SATA drivers for your motherboard.
 
You need a floppy disk actually. Find the SATA drivers for your mobo off of the Asus website. Save it to a floppy disk. Then when Windows XP is installing, when prompted, press F6. Put in the floppy and there you go.
 
No. Windows XP still requires a floppy disk in order to load SATA drivers.

Now what puzzles me is how come you didn't run into this problem before with RAID setup you had. Did you install Windows XP on that RAID setup before?

Oh and did you format that 200GB drive before you installed?
 
Which drivers should i be installing....RAID ....promise or VIA

What i dont understand is why Raid drivers would make a single harddrive work or not? Can someone explain.
 
Wait how did you get two different SATA drivers? Did you get them from ASUS?
 
is there an option to run sata drives as ide vs as sata / ahci? if so, stick to ide mode and you shouldn't need drivers
 
Back
Top