Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
well if you want to go all out then this would be the board to get..
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131642
if you want to save a little and get almost the same features minus stuff you won't ever use then this is a good option..
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131666
but honestly unless you are going with the i7 970 or 980x i'd recommend taking a look at lga-1155, far cheaper and better performance, only the 970/980x are faster than an i7 2600k.
Okay thanks although I just got a 920 cheap from a friend I will look into the 1155 cpu's.
if you got it cheap stick with it. no reason to spend a few hundred bucks more when you already have a processor thats more then enough for what you want to do.
Not by much my friend.. not by much.
No they aren't and they are really only faster in specific applications. Encoding being the main one. If you are a virtual machine fanatic, then the Core i7 970, 980X and 990X start to make more sense if you can afford it.
I second the recommendations for the Rampage III Formula, Rampage III Extreme, and Rampage III Black Edition. Assuming you can foot the bill for the last two.
Anyone who buys a 970, 980X or 990X is a complete moron. The Xeon W3670 is MUCH cheaper AND enables ECC memory. Stick some heatspreaders on Crucial RAM and go overclocking.
Anyone who buys a 970, 980X or 990X is a complete moron. The Xeon W3670 is MUCH cheaper AND enables ECC memory. Stick some heatspreaders on Crucial RAM and go overclocking.
You might want to check again there bud. W3670 is $600 and 970s go for $550.
I'd definitely go for the 1155/2600k setup over an X58, but that's just me.
The Xeon W3670 isn't multiplier unlocked...
... and I couldn't give two squirts of piss about ECC memory in a gaming computer.
I'd rather use higher frequency RAM modules with tighter timings thank you.
I purchased my 980X right after the 990X's came out at Microcenter for $699.99.
You might want to check again there bud. W3670 is $600 and 970s go for $550.
Some P67 boards use the nForce 200 MCP to help alleviate the bottlenecks of the P67 Express chipset and the Sandy Bridge I/O controller, but such boards are few and far between compared to X58.
If the need for PCI-Express lanes truly weighs above all else in this case, then yes X58 would be the way to go.
For gaming purposes, I'd still stick to P67, at least at this point.
And neither is the 970. Besides, unlocked multiplier isn't all that useful, unless you are overclocking so much that using bclock alone is an issue.
That's very polite...
As if it's going to make any noticeable difference in performance. What was the last game that was memory bandwidth limited? Oh, right... none. In fact, most are GPU limited, and to a lesser extend CPU limited.
I was referring to the people who spend a thousand bucks for it, not for those who got it as a clearance deal.
Yeah, depends on the store. I can see W3670 for $500, i7 970 for $500 too. The difference ain't THAT between them, but you get more with the Xeon.
A PCIe switch is not a replacement for PCIe lanes though. It just happens that with GPUs you usually don't see a difference, as they usually don't fully saturate eight lanes. Other add-on cards are a different story though.
Z68 please. P67 is kinda pointless now; actually it has always been.
Some of us do more than game with our computers.
Also, X58 seems to benefit from more memory bandwidth due to architectural differences between say Nehalem / Gulftown vs. Sandy Bridge. Second generation Core ix processors simply don't benefit much if at all going from DDR3 1333MHz vs. DDR3 1600MHz or more. The reverse is not necessarily true when referring to X58 based systems.
The 970, 980X, 990X and their Xeon brothers on the other hand are only useful for very specific scenarios. Even at $1,000 one may find value in such a processor if they can truly leverage those extra cores. Again your average home user and gamer won't. But for professional workstations, especially those doing 3D rendering / modeling and video editing, and or encoding, they really can represent a value. Time is money for some folks.
How do you get more with the Xeon? All it supports that the Core i7 970 doesn't is ECC memory and AES NEW instructions. How will the home user or gamer benefit from either one of those things?
I know some people believe ECC will make their system crash proof, despite the fact that ECC equipped servers crash when they've got problems just like anything else. I see it all the time in data centers. You get a whopping two features which most people don't give a shit about and don't need.
The CPUs are virtually identical. I'd say get which ever is cheaper.
I never suggested that it was.
I'm the guy who argues against that logic in all the motherboard and GPU threads revolving around that topic. What I did mean was that X58 is a more flexible solution which does offer more PCI lanes than P67. X58 boards are a better choice for people wanting to add additional devices like sound cards and drive controllers. X58 is more flexible when it comes to PCIe lane allocation. Simple as that.
How is P67 pointless? How has it always been? Z68 has the SSD caching feature which only benefits people who do not use an SSD for their OS.
The onboard video is really only good for quick sync and people who do not use a discrete adapter.
Currently, there are no power savings to be had using it and unless you want to run multiple monitors in a non-Eyefinity / NV Surround setup, it has no value for most gamers.
P67 boards can be had for less money than Z68 and if Z68's added features aren't helpful to you then why spend the money?
Memory bandwidth is unlikely an issue there.
X58 has triple channel memory. That's a LOT of bandwidth at 1333MHz, 32GB/s. What workload needs that much of memory bandwidth, let alone more? Wait, what workload needs more than 22GB/s that dual-channel offers? Well I can only think of business stuff like ERM, sales databases & calculations, etc. Those are run on dual or quad socket systems, not an overclocked X58 chip.
Those folks get a LOT more value from a dual socket system. If that's too costly, they will CERTAINLY get a Xeon, maybe not for ECC memory, but for support and maintenance. Dell/HP/Lenovo offer business support on their workstations, not on gaming computers. Very few businesses would take the risk to overclock, so that's out the window.
AES instructions ain't too useful really, only if you encrypt your boot SSD.
ECC isn't going to help with a bad driver causing the operating system to crash. It will help with memory errors causing the crashes though; lots of people keep their computers on for a LONG time (average Joe simply turns off the monitor), memory errors can develop easily; all it takes is a single flipped bit and the kernel can panic, or data can be corrupted. Most people won't care much though, although geeks should.
I'd recommend the Xeon any day, especially with ECC memory, except if you need the unlocked multiplier, in which case, ask for a discount on 980X now that 990X is out.
Sound cards aren't really a use case for X58 heh, but drive controllers or network cards, sure. That's precisely what will make you curse a PCIe switch, especially the NF200, which seems to have higher latency than alternatives from PLX, probably due to extra logic for SLI.
That's not a great feature anyway.
THAT! Also extra monitors, if you're into lots of monitors. But Quick Sync is the whole deal; all Core i-2000 CPUs have the sillicon for that, why not be able to use it? Typical Intel retardness; it's not like the P67 boards are a lot cheaper, if at all.
Everyone encodes a video sooner or later, and since it costs the same or close to, why not? It's faster than doing it on the CPU with nearly identical quality.
Not much cheaper, on the order of $10-15. QS is pretty helpful actually, can save a lot of time.
Ill sell you my p6t deluxe for 120$? /shameless plug.
Ill sell you my p6t deluxe for 120$? /shameless plug.
Rocking the Rampage Formula here...very happy with it, despite the wonky SATA3 chip but that is OT.
If the OP is planning on folding or mining then PCIE lanes become a consideration and to date X58 is pumping the most PCIE bandwidth...if OP has a 920 in hand I say go for it.
For servers and ultra high end workstations, ECC is desirable. For home users and even most business and workstation machines, it's not.
I might re-purpose the processor down the line when I upgraded my gaming machine again and use the old hardware for server duty.
I went over that with an engineer from Gigabyte because a couple of their boards lack the ability to run more than one of their integrated SATA controllers in RAID mode at the same time.
Why not be able to use it? Because some of us don't care to use it. I'm running two GTX 580's in SLI. The last thing I need is another DVI port.
I've noticed that some people will actually balk at spending $10 or $15 more when we are talking about features they do not need.
And again, I advocate P67 or Z68 more often than not. The people who will benefit from X58 are few and far between and unless you are going with some kind of six core processor and can leverage it, chances are you won't be among those who can really take advantage of what little X58 has to offer over other more modern chipsets.
Thanks.Looking at either the formula or extreme or G1 assassin(goes with color themed build).The Rampage black edition to is in my color scheme but is expensive.
Anyone who does software development, should demand ECC. Can't imagine debating where the bug is due to a coding error or due to memory flakiness. Usual business machines, not so much; workstations, the little extra cost of ECC is worth, just one instance where the machine would crash of a memory error in it's 3-5 years of lifetime and it's payed for itself several times.
That's a good idea. I haven't thought of that before. It pretty much makes the $10-15 difference of getting the Xeon worth it; the CPUs are so good these days they'll be fine in 5 years or more as a home server CPU.
Not too useful to run the integrated controllers in RAID anyway; outside of RAID 0/1/10, the performance is horrible.
You can get Z68 mobos without video output ports. Quick Sync still works fine in that case. You can encode on software and on QS at the same time at full speed.
Let me guess, the same people spending a thousand bucks on a CPU, or five hundred on a motherboard? Even if not, I know some people won't do it; you can't please everybody after all.
I get horrified when I see people buy 990X just to run GTX 460 SLI on it, or even 580 SLI, using that computer only for gaming; that'll be slower than a 580. Or requiring 16 lanes to the GPU, to shave 100ms off level loading, or add half an FPS to their already 150+.
Also I believe testing of software should happen on common system configurations out there found in homes across the world. Which would preclude the possibility of using ECC RAM in the test environment.
In such cases it absolutely would make the Xeon a better buy. I've been running my dual Intel Core 2 Extreme Edition QX9775's with FB-DIMMs now for about 2 years. Previously it was my gaming setup.
No disagreement there. I just wanted to point out that integrated RAID on many of the newer, X58, P67, Z68 and even 990FX boards are a total mess these days. Adding a controller of your own may or may not work in all instances and cause you even more pain.
No. The people who I've seen bitch about $10 or $15 price difference are on a budget they absolutely have to stick to. People who I've seen budget for super high end hardware generally don't care if they run hundreds of dollars over their initial cost projection.
But how is that slower than a 580? WTF are you talking about?
In my opinion any of the ASUS Rampage 3's, I have a Rampage 3 Extreme in my desktop never had a problem. Also I have a Rampage 3 GENE in my HTPC I love it cause it has the X-FI onboard sound chip
ECC RAM doesn't impact the testing negatively, it helps rule out bugs, and helps rule out debugging weirdness. It's not really important on testing machines though, I meant for developer workstations, when debugging the applications. You seriously don't want a memory error when you're deep inside application code.
Ouch, FB-DIMMs :<
Well unless you get a board like X8ST3-F which has an LSI chip, yeah, integrated RAID is a mess.
If they are on a strict budget why are they looking at 2500K/2600K and P67? Well maybe if they want to keep that system for 5-7 years. I agree there. Intel could have ditched P67 from the start and made Z68 cheaper. Or hell, ditch Z68 and give P67 access to video.
Ahh sorry, I was writing something and scrapped it, but didn't remove all of it. Now it makes no sense xD Forget about the 580 SLI and slower than 580.
I have more control over the overclocking with unlocked multipliers. I get to set my memory speeds without concern for where my BCLK may put the actual memory clocks. It is also easier to overclock the CPU because I can literally raise the multiplier and the CPU voltage without touching any other settings. Some of us like that.
I think P67 is best bang for the buck now, considering how easy to push @4.5ghz stable on 2600K.
That would give you enough juice for any game .
X58 just not so hot anymore even if you go with 970/980x chip.