Winter time is right around the corner...

Joined
Oct 19, 2002
Messages
618
I used to fold 24/7 with everything I could, then living in Louisiana with the A/C combating 100F weather and the heat produced from my rigs ended up leaving me with $300+ electric bills. Now that winter time is coming around I should be firing the clients back up. I do not think I even used my heater last year.

I have slightly upgraded my rig and have an extra 4850 I may throw in to fold with also. I assume my Corsair 620HX can support a 4850 and a 5830.

Anyways, anyone else coming back to fold for the winter, or cranking up an extra rig?
 
I turned the 9800GX2 back on a while ago :) Installed a few extra fans in the case as well. I think it'll keep my room nice and toasty this winter :D
 
After having a cool summer in CA it was 100F+ all week and I had to shut down, no AC. Can't wait for it to get cool so I can fold and not have my place be 90F inside.
 
I have slightly upgraded my rig and have an extra 4850 I may throw in to fold with also. I assume my Corsair 620HX can support a 4850 and a 5830.

Nice to have you coming back on board. It sure would be nice if they would release a new GPU client that will produce more with the ATi cards. There is so much potential in those cards that they don't utilize and F@H could really benefit from it. I read recently where there is something in the works, but AKAIK no updates have been released yet.
 
Due to how the GPU client really sucks up a lot of cpu cycles with ATI video cards, you may be better off leaving them off and just running the SMP client since your PII 965 should produce about 7000ppd. Welcome back as you picked a great time since we are in the fight of our lives with that other team right now. Also don't forget to enter your badge in the new GTX 460 giveaway for this month :)
 
i just got a couple of my quads rolling, and I've got an Athlon X2 box that needs a proper video card, and then I can throw it in the rack...
 
oh yeah. i definitely scale back, particularly my GPUs, during the summer.

now that it's chilly, the throttle's wide open
 
/huddles around his SR-2s

I hope it is a cold one :D
 
it got to 40 F last night and I was cold as hell. I have received permission (from the gf) to have the computers come inside for the winter and keep my buns toasty warm ( i may even get to upgrade mwhaha).

I was also throttling back during the summertime only running my rigs half the month in order to keep the electricity bill down. I pay ~18 cents kwh!!!
 
Last edited:
Amazing... it was 46f last night, and I decided to shut off the AC in the spare room. This morning at 4:30 it was 79f in there.
I live in a small house. I'm beginning to think that I could come close to heating the entire place if I got another folding rig running. The lower gas bill in the winter would come close to offsetting the higher electric bill in the summer.

Mini itx box for the bathroom sounds cozy. :D
 
Yep I think a lot about ways to efficiently use my pcs to heat my house. Problem is, I would need to stick rigs in my kids rooms to keep them from freezing.
Posted via [H] Mobile Device
 
Yep I think a lot about ways to efficiently use my pcs to heat my house. Problem is, I would need to stick rigs in my kids rooms to keep them from freezing.
Posted via [H] Mobile Device

new play toys for the kids??? You could justify having more rigs and you would always have a reason to upgrade (kids broke your old stuff). Win, Win, WIN!!!!!
 
Yep I think a lot about ways to efficiently use my pcs to heat my house. Problem is, I would need to stick rigs in my kids rooms to keep them from freezing.
Posted via [H] Mobile Device

That is pretty simple. All you need is an AM3 motherboard with a pair of Fermi GTX 480 space heaters for their room. That should keep them nice and cozy.
 
Amazing... it was 46f last night, and I decided to shut off the AC in the spare room. This morning at 4:30 it was 79f in there.
I live in a small house. I'm beginning to think that I could come close to heating the entire place if I got another folding rig running. The lower gas bill in the winter would come close to offsetting the higher electric bill in the summer.

Mini itx box for the bathroom sounds cozy. :D

Sounds cozy but watch the humidity on the fan motor's, pulled the fan motor apart after my 250 died and found rust over all the iron bushes in the motor, damn thing hasn't worked right since. Managed to track the cause down to people leaving the internal garage door open and letting the damp air from the tumble dryer into the main house.
 
Yep I think a lot about ways to efficiently use my pcs to heat my house. Problem is, I would need to stick rigs in my kids rooms to keep them from freezing.
Posted via [H] Mobile Device

If I could only [effectively] teach my toddler to stop pressing the big button on the front of my flagship folding rig .... I'd put a rig in each room. Bad child, bad!

My home office has a hydronic panel radiator for heating but it's valved off because the main rig keeps it warm enough .... even for the pet tree frog which likes it tropical-toasty-like. Heats the room, keeps the frog happy/alive and folds [H]ard for the cause. Good stuff. Now if I could just make the [nocturnal] frog not to make so much noise @ night when we sleep it would be perfect. Shh frog, shh! :)
 
If I could only [effectively] teach my toddler to stop pressing the big button on the front of my flagship folding rig .... I'd put a rig in each room. Bad child, bad!

You could just disconnect the power button and use an internal case button if it's not too inconvenient. As for the frog, set up timers on lights to switch day and night for your frog.
 
Hopefully my brother will switch his 8800GT back on soon. He has a spare room that is not connected to the heater for the rest of his house. Last winter he ran it 24/7 to reduce the propane use by the little wall heater. My ex gf has a 9600GSO in her comp that I put in there. I'm wondering if I should call her now that it's cooling off and see if she will kick it back on.
 
It was 95° F here Saturday and now its dropping down into the 70s. Just in time for system #3 to be born. :)
 
It got down to ~40ish last night here. I still had to run the A/C to keep my apartment bearable. Going to move one of my headless rigs into the bedroom for heat there this winter. I have another rig that should be coming online this next weekend, so it looks like it is going to have to get into the low 30's for me to turn off the A/C. :D

Fish :cool:
 
It got down to ~40ish last night here. I still had to run the A/C to keep my apartment bearable. Going to move one of my headless rigs into the bedroom for heat there this winter. I have another rig that should be coming online this next weekend, so it looks like it is going to have to get into the low 30's for me to turn off the A/C. :D

Fish :cool:
why don't you just open up some windows? :)
 
I'm down in San Diego- and also finishing the heat for the summer (I hope). As a plus, I unlocked a core on my 720, and only had to back down about 5% on overclock! That should give a few more PPD, and help heat the upstairs...
 
The weather here in MI is cooling off so I started a bigadv on my main rig early yesterday morning and then also started folding on my laptop last night. It is sad that the warm weather is leaving but exciting to begin folding again. :)
 
The weather here in MI is cooling off so I started a bigadv on my main rig early yesterday morning and then also started folding on my laptop last night. It is sad that the warm weather is leaving but exciting to begin folding again. :)
that reminds me, I fold a lot on my laptop, and I just used a vacuum to clean out the cooling system, and wow it runs so much quieter now! CPU temps dropped a good 15 degrees
 
Well the furnace isn't working. The comps are what are keeping us warm atm.
 
bad news for me (and Zero2Dash) in the STL.....supposed to be 76 today. I'm not gonna be home, but I feel sorry for my family. It's gonna get toasty :)
 
bad news for me (and Zero2Dash) in the STL.....supposed to be 76 today. I'm not gonna be home, but I feel sorry for my family. It's gonna get toasty :)

heh, it finally cooled down to the 70's here this week so now I CAN open the windows.
 
that reminds me, I fold a lot on my laptop, and I just used a vacuum to clean out the cooling system, and wow it runs so much quieter now! CPU temps dropped a good 15 degrees

How in the world did you use a vacuum to clean out the cooling system on your laptop? Mine is running hot, although I only fold a single classic wu per week on it.
 
I just stick the vacuum hose attachment up to the vents on the laptop. I folded on my laptop for a while, and at one point the internal fan stopped spinning. :eek: A little vacuuming fixed it, but I don't fold on it anymore because it's an old dual core and not very efficient.
 
use a vacuum or canned air to make air flow in the opposite direction as the one it usually blows.

So, I stuck the vacuum against the air intake vents on the bottom of my lappy while I blew into the exhaust vent.

It made a huge difference.
 
Wow, you learn something new everyday. I had no idea that you could use the vacuum hose attatchment in this way to clean out a laptop. So you suck air from the air intake, and at the same time you blow compressed air into the exhaust vent?

How strong of a vacuum are you guys using? My sweeper has a vacuum hose attatchment, but it honestly doesn't do much sucking as it was designed to mostly be a sweeper. The sucker is loud though and pulls over 15 amps from the wall. When I use it, I have to make sure there is nothing else plugged into the same circuit.
 
Wow, you learn something new everyday. I had no idea that you could use the vacuum hose attatchment in this way to clean out a laptop. So you suck air from the air intake, and at the same time you blow compressed air into the exhaust vent?
I just blew into the intake with my mouth. ahem
How strong of a vacuum are you guys using?

I'm using a dyson. it sucks pretty hard.
 
Am I the only one who disassembles laptops to clean them? :) My Packard-Bell laptop is pretty easy that way: only have to remove one panel on the bottom to gain access to the HSF.
 
A Packard Bell???

I had one of their PCs years ago. It was a 60 MHz Pentium and had Windows for Workgroups 3.11 installed.
 
I just blew into the intake with my mouth. ahem

I'm using a dyson. it sucks pretty hard.

You blew with your mouth? I would be scared to do that since I would probably accidently spit into it. I'll just use compressed air as Micro Center is running a sale again.

Am I the only one who disassembles laptops to clean them? :) My Packard-Bell laptop is pretty easy that way: only have to remove one panel on the bottom to gain access to the HSF.

Haha, don't tell you Norwegians still have Packard Bell over there! I havn't seen those since the 486 days right before they got bought out by NEC. The last one I ever saw was a Packard Bell desktop(not a tower, the monitor sat on top of the computer) with a Intel 486/33SX processor.
 
You blew with your mouth? I would be scared to do that since I would probably accidently spit into it. I'll just use compressed air as Micro Center is running a sale again.
AARRGH i was at microcenter today, and I was TRYING to remember what I needed to buy. It was friggin canned air.
Haha, don't tell you Norwegians still have Packard Bell over there! I havn't seen those since the 486 days right before they got bought out by NEC. The last one I ever saw was a Packard Bell desktop(not a tower, the monitor sat on top of the computer) with a Intel 486/33SX processor.

Yeah, last one I saw was a desktop version. I played that skiing game where the snowman always ate you at the end.
 
Well the furnace isn't working. The comps are what are keeping us warm atm.

You better get that thing working before the 23rd, or CCityClaus might not come to visit;)..

I have a bigadv rig coming online this weekend..just waiting for the damn MB to finally arrive..

 
Am I the only one who disassembles laptops to clean them? :) My Packard-Bell laptop is pretty easy that way: only have to remove one panel on the bottom to gain access to the HSF.

haha, Packard Bell, good times! :D
 
Back
Top