Win7 reinstall needed for mobo&cpu change?

Badcop1124

Limp Gawd
2FA
Joined
Aug 28, 2008
Messages
183
Is a clean install of Windows 7 Ultimate 64bit needed when changing a motherboard and CPU? Completely different mobo/CPU combo will be installed.
I was always told "best practrice" is a clean install.
 
Windows 7 is fairly robust. So robust that you can indeed move the install to an entirely different motherboard and CPU with little issue. Thats what I did with my current Windows 7 install: Moved it from an Intel C2D + P965 motherboard to a AMD Phenom II + 790GX motherboard.
 
Nice!
Thanks, Danny Bui!
Got my new parts today, going to do the switch this weekend.
 
There is a SysPrep tool in Windows 7 that only works if the Windows 7 installation is a clean install (not an upgrade install). Note that it should be used only if the onboard hardware on the old motherboard is different enough from the onboard hardware on the new motherboard so as to increase the likelihood of conflicts.
 
I've found Win7 to be good at repairs as well, if needed; though a repair was not needed when I switched between systems that last few times I've done it. :D
 
Windows 7 is fairly robust. So robust that you can indeed move the install to an entirely different motherboard and CPU with little issue. Thats what I did with my current Windows 7 install: Moved it from an Intel C2D + P965 motherboard to a AMD Phenom II + 790GX motherboard.

I've done 3 mobo/cpu swaps but they were 2x Intel to Intel and an AMD to AMD swap with no issues. Wasn't sure about Intel to AMD but looks like you did it with no issues.
 
Would the same apply to VISTA?


hard to say, vista is a little more finicky in my opinion even though they are based off a lot of the same coding.

though the one thing i've found with all windows versions is that they absolutely hate going from a nvidia chipset to amd/intel or vice versa.. even windows 7 threw a fit when i went from an 780G to m2n-sli deluxe even after deleting all the AMD drivers. then it threw a fit when i tried moving the drive back to another 780G motherboard.
 
Well my windows VISTA did Not even boot when I changed my ASUS P8P67 to the new P8P67 Rev (3.0) stepping.
 
Well my windows VISTA did Not even boot when I changed my ASUS P8P67 to the new P8P67 Rev (3.0) stepping.

Some tricks in the past I've used is to boot in Safe Mode (if you can) and delete all the mobo hardware from Device Manager, then restart, Windows should hopefully plug and play the new parts.
 
Problem is that i could not even get there as it kept on giving a UEFI file missing error or something.
 
Back
Top