Win XP O/S installing on New Build

HardwareGuru

Supreme [H]ardness
Joined
Jan 5, 2007
Messages
4,772
Ok, so I came up with a pretty decent AMD X2 550 pc build for $525 to upgrade my brothers Shuttle pc. Most likely going to order this from NewEgg. I already have the computer case. My brother has this Shuttle PC he bought from Sams Club years ago. It's an AMD Athlon 64 3700+, 1GB DDR, 512MB ATI Radeon 9600 and 200GB Sata 150 HDD with Windows XP Home O/S. He has some CAD programs on this machine and wants to run it in Win XP Home. Not sure if it will run in Vista. But, for now, XP Home is fine and it will be a huge upgrade than that Athlon single core build. If I copy the data from the 200GB drive that's in the Shuttle PC onto the new WD 640GB drive and have Win XP Home detect the hardware setting on the new AMD Mobo and other components, will I run into issues? Or, Windows will just detect the new hardware settings and it just need to load the proper drivers. I don't know where he put the recovery cd for that Shuttle PC. It's probably gone already. I know if you have the Windows XP cd, you can just boot off the CD and have Windows do a system repair. But, in this case, there is no Windows XP CD. So, I'm just trying to work with the Windows XP O/S that's installed on the 200GB drive. What do you guys suggest or recommend?
 
If you have a XP Home CD on hand somewhere, just use that alongside the serial key from that XP install. Use Jellybean Finder to find out the serial key for your bro's copy of XP.

In my experience, moving an OS install from one PC to another rarely works out well as the OS is either sluggish, slow, or unstable even after stripping out every driver from the system. Sysprep works but might not be applicable in this case since you may or may not have a XP Home CD on hand.

Or you can see if your bro's CAD app will work in Windows 7 RC.
 
Damn, I was afraid of this. I don't have a Windows XP Home cd but an XP Pro. If I use the XP pro cd with the serial key for XP Home, would that work? Or, XP Home product key has to be with a XP Home O/S? If that doesn't work, what if I just do a drive copy of the old drive onto the new drive and then boot the PC with the XP Home O/S installed. Would I run into issues as the PC boots, or would it go through a process where it will try and load the drivers for the new hardware? I know when I use to do this With Win 95 and Win 98 O/S it would load whatever drivers it can find for the hardware and I will need to maually install all the drivers it did not load by downloading them off the web. But, I have not done this with Win XP O/S. Soo.. I don't know what's going to happen. Excuse me hehe. but software is not really my expertise.
 
Damn, I was afraid of this. I don't have a Windows XP Home cd but an XP Pro. If I use the XP pro cd with the serial key for XP Home, would that work? Or, XP Home product key has to be with a XP Home O/S? If that doesn't work, what if I just do a drive copy of the old drive onto the new drive and then boot the PC with the XP Home O/S installed. Would I run into issues as the PC boots, or would it go through a process where it will try and load the drivers for the new hardware? I know when I use to do this With Win 95 and Win 98 O/S it would load whatever drivers it can find for the hardware and I will need to maually install all the drivers it did not load by downloading them off the web. But, I have not done this with Win XP O/S. Soo.. I don't know what's going to happen. Excuse me hehe. but software is not really my expertise.

XP Home Key with XP Home CD and XP Pro Key with XP Pro CD. If you reimage the new drive from the old drive, it's still exactly as if you were to hook up the old drive to the new system. Yes XP will load or ask for new drivers for the new hardware BUT there's a good chance, at least in my experience, that the system will be slow, buggy, and unstable. But you might be one of the lucky ones where the swap is completely error free.
 
Alright. Thanks Danny for the help. I'll just try and see if XP home will be able to load the new drivers for the new hardware. If it becomes unstable, I guess I'll just download Win 7 RC and install the programs from there and see if his CAD programs will run in Win 7 RC.
 
Alright. Thanks Danny for the help. I'll just try and see if XP home will be able to load the new drivers for the new hardware. If it becomes unstable, I guess I'll just download Win 7 RC and install the programs from there and see if his CAD programs will run in Win 7 RC.

yeah it's worth a try. I'd clone the old drive to the new drive and see what happens. If shit happens, at least you'll still have the stable old XP install on the old drive.
 
Back
Top