Will raid card cause sli conflict?

davidm71

[H]ard|Gawd
Joined
Feb 11, 2004
Messages
1,570
Hi,

I was going to order a Adaptec 2405 raid card as my 680i Abit board was unable to handle two 300GB velociraptors in raid without data corruption. This raid card is a pci-e 8x capable card and goes for around $220. My fear is that with my SLI setup that I will have conflicts with either boot or SLI resource conflicts. I also read a review that the ICH10R raid 0 is almost identical performer compared with two Vraptors against the 2405 card which is only slightly better in burst speeds. So I can hold on to the raptors until I get the cash after taxes next year and build a new i7 rig or just return them. I have two caviar blacks running in raid 0 and they bench faster than I thought but they don't feel lightening fast. Also the initialization time of adaptec raid cards is slow and works against wanting a fast boot up time. So should I take heed of my premonitions that this raid card is going to cause problems? Should I hold on to the Velociraptors? Return them and go for SSD?

Thanks.

PS: WD generously offered to pay for my restocking fees on the velociraptors and its on its way.
 
raid controllers do have issues with some SLI motherboards so it is something to be aware of. I use an ARC-1231ML in my nforce 650i board's second x16 PCI-express slot (meant for a vid card) and have absolutely no issues.
 
Back
Top