Why SODIMMs on a desktop board?

JJ Johnson

Gawd
Joined
Jun 26, 2008
Messages
802
I've been looking at Atom motherboards for a small, quiet server build. Looking at the Intel BOXD525MW I note that they've moved to using 204 pin SODIMMs for the DDR3 memory. Does anyone know why that would be, instead of using standard 240 pin slots?
 
I should think it's obviously an effort to constrain board size. Atom boxes are typically meant for applications where space is a premium.
 
The board size is already defined as mini-ITX, so I suppose you mean an effort to gain real-estate on the board. I'm not so sure anything is gained, as the SODIMMs have to be laid down. They may even take up more area on the board.

Compare their previous D510 board with the D525 board:

D510.jpg


D525.jpg
 
You are thinking only in 2 dimensions though. If you are looking for a "thin" solutions, that vertical height matters.
 
Not in this case. Normal memory modules are no taller than the either the CPU heat sink or the ports on the backplane.
 
Maybe power consumption? Seems to me most ddr3 sodimms are 1.5v and up until SB most ddr3 dimms were 1.65.

Or maybe just to allow them to change the layout of the mobo. Notice on the new board all of the plugs are on the outer edges. Should help CM and maybe better airflow.
 
foxconns netbox uses sodims also.....no way they could come out with a box that small if they used full size memory modules.
 
Even with the spaace taken by laying down the sodimms on their side, judging from the images above they still take up less area on the board than the standard dimms.

On top of that they allow for low profile as mentioned above. Just because other components on the board are taller, doesn't mean low profile memory can't provide space savings. Other components inside the case could be positioned to sit in the space directly above the SODIMMs (pico PSU, SSD etc)
 
Back
Top