Which should i keep and which should i sell e6300 vs e2200

alphaqforever247

[H]ard|Gawd
Joined
Apr 6, 2006
Messages
1,682
I have both laying around cause i got the q8200 at micro center to replace my e6300. my bro got a e8500 and swapped his e2200 now there both laying around. I want to build me other bro a comp but dunno which cpu to us e6300 or e2200? Which one would you guys suggest.
 
The E6300 is a much better CPU. It will require a higher FSB to hit the same overclocks as the E2200, but its larger cache will help its performance a lot, and the Conroe core also overclocks better than the Allendale core.
 
I have to concur with Zero82z: While the E2200 is clocked higher by about 300Mhz, I doubt that extra clock speed will help as much as the larger L2 cache that the E6300 has. A couple reviews showing the differences between L2 Cache sizes:
Influence of L2 Cache Size on Conroe Processors Performance @ XBit
UT3 Review: Cache Scaling: 1MB, 2MB, 4MB @ AnandTech

If you're planning to OC, Zero82z is correct: The E6300 would OC higher and, as shown in the above L2 cache comparisons, would outperform the E2200 clock for clock. However the E2200 would be a whole lot easier to OC due to its higher multiplier and therefore lower FSB requirements. The E6300 is a bit difficult to OC with due to its 7x multi and higher FSB requirements. But the payoff is greater with the E6300.

But even at stock speeds, the E6300 will outperform the E2200.
 
The sSpec number is on top of the CPU.

SL9SA for the good B2 stepping.
SL9TA for the not so good L2 stepping.

My B2 was a great processor. I just remembered, my CPU was an E6400 - B2. It's still near the top in the [H]ard OC database for air cooled. 3520 MHz with the Intel cooler and 3640 MHz with a Tuniq Tower.

On a good board, the B2 has lots of potential. Don't be afraid to give it some volts. The old 65nm CPUs can take it. :)
 
Back
Top