what is the -5v used for?

amdownzintel

Limp Gawd
Joined
Oct 24, 2004
Messages
201
So I've noticed a lot of new power supplies don't have a -5v on them. I'm curious as to what this voltage does. I've had some new computers recently not work with our new PSU's but work with our older PSU's that have a -5v. Not sure what is really going on here wondering if anyone could shed some light on this.

Ex: PC wouldn't post, unplugged everything, but board, ram, proc, PC still no go, swapped ram etc, still no go. Switched out PSU to our test PSU that has a -5v same wattage as the other and posts just fine. Tried to google the -5v and couldn't really find much, so curious if anyone actually knows.

Thank You.
 
-5v hasn't been used at all since the intro of the ATX v2.01 in 2004. Most new PCs don't require it. IIRC, the -5V was only needed for ISA cards.

What are the specs of these "new" computers?
 
-5V became optional with ATX12V 1.2 in 2002:
The only significant change was that the −5 V rail was no longer required (it became optional). This voltage was very rarely used, only on some old systems with some ISA add-on cards.
http://en.wikipedia.org/wiki/ATX#ATX_power_supply_revisions

So unless you have an old ATX system with ISA slots I don't see how not having a -5V rail would prevent it from booting. Are you sure the new PSU delivers enough power?

I'd like to know the specs of those 'new' computers too :)
 
I was just about to post something on this topic..

I need an "all purpose" ATX power supply that I can use for diagnosing friend's PC's. I'd like to get one that has a -5V rail. It doesn't have to be very powerful, or even new. Any recommendations?
 
I had the same prob a few months back and it endded up being a grounding issue with the power strip. The electrcian had the wires backwards on the wallplug so the powestrip kept sensing a ground fault but there wasnt one. I had everything on cardboard and no powerstrip and it ran fine but plug it in to the strip and nadda!
 
I was just about to post something on this topic..

I need an "all purpose" ATX power supply that I can use for diagnosing friend's PC's. I'd like to get one that has a -5V rail. It doesn't have to be very powerful, or even new. Any recommendations?

Your friends are still running PII-era systems? Or rather, they're still using ISA cards? Might be easier to just get them a cheap used system which is less outdated :p

At any rate you'd have to find ATX 1.1 or earlier type PSUs, which would force you to look for used PSUs most likely. It won't be that easy unless one of those friends of yours still has an old ATX PSU lying around or so. Else try eBay :)
 
new computer was an asus motherboard something, with a Q6600 or something, happened a few months ago and was really curious. The other machine it happened to was an old compaq so makes sense for that. Otherwise yeah same wattage and such so never made sense.

Maybe was just the board in the first pc, infact I'm pretty sure all we did was switch the board from an asus to a gigabyte and it fired. But it also fired with a different PSU on the asus mobo so maybe it just wasn't regulating power correctly?
 
Back
Top