• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Weired hardware problems after overclock

M

MellonSplitter

n00b
Joined
Mar 27, 2005
Messages
44
After OC my Winnie 64 3000 to a 2151 mhz, which i think isnt to high, especially since it isnt getting hot, and OC my BFG 6800gt to 400 mhz, i need to reboot my comp sometimes twice, then my LCD kinda freaks out with a few little wiered flashes. I have reset everything back to where it was before but these things havent changed. What do i need to do to stop these kinds of glitches?
 
Are you using all stock cooling or are you using aftermarket?

Have you somehow messed with your refresh rate to something outside of what your LCD can handle?
 
hi, are you sure that your PSU can bring up the juice for your OC on the videocard?
I read some specs and the 400MHz OC isn't extremely high.(425 MHz is possible,stock cooling ;) )

Had some similar problems.Upped the PSU from 450Watt to a 650Watt PSU.
(you should see all the crap that's powered by this PSU.(airtemp PSU > 60°C/140°F)

Grtz
 
I am using stock amd retail fan cooling on cpu, stock cooling on VC and my motherboard is a K8T Neo 2 series. I also have a Antec true blue 480 watt PS
 
Try setting the AGP freq to 67MHz, that will lock the bus on my neo2. Also, are you using slots 1,2 of the SATA HD. I think they cannot be locked.
 
You must log in or register to reply here.
Back
Top