Ways to recover from a low-level format?

Xynder

Limp Gawd
Joined
Feb 17, 2002
Messages
250
I have a question,

I used one of Western Digital's DOS utilities to perform a low-level format on my HD (write zeros to the drive).

Is there ANY possible way for any of the data to be recovered now?
 
writing zeros in not a low level format. And there is no way you can recover a write zeros yourself. You can spend lots of money and send it to a lab. They can examine the drive for residue magnetic traces on the edges of the tracks and recover it, but your talking about thousands of dollars probably.
 
Met-AL said:
writing zeros in not a low level format.

It was under WD's site under "how do i perform a low level format on a western digital hard drive"

Anyways, is a low level format even MORE secure?
 
Xynder said:
I have a question,

I used one of Western Digital's DOS utilities to perform a low-level format on my HD (write zeros to the drive).

Is there ANY possible way for any of the data to be recovered now?

what exactly is on this hard drive that is so bad that you are that afraid of it being recovered?
 
A low level format is not possible on ATA drives except at the factory.

SCSI drives can be lowe level formated thru the SCSI adapters BIOS.

To make it more secure, there are programs that right junk to it several times. I think the Department of Defense has some rule about it needing to written to 7 times to be considered secure. Remember the DoD is refering to spies and shit trying to recover very important data from discarded hardware..
 
Met-AL said:
A low level format is not possible on ATA drives except at the factory.

SCSI drives can be lowe level formated thru the SCSI adapters BIOS.

T..



Thats not even true anymore...


The "low level format" in SCSI BIOSes will cause any modern drive to do a zero-fill. Only a few VERY OLD drives will do a true low level format...


FYI: Low-Level format is the term used to describe the process of writing the actual tracks and sectors on a disk platter, as well as setting the drive's internal defect management. On all modern hardrives this has to be done at the factory, the drive's electronics are not capable of writing this information on their own.

On VERY OLD drives (10+) you actually did do a low level format. And when you format a floppy disk you are doing what would be considered a low level format.

For SCSI the commands to do a LLF still exist, but will cause any drive made within the past several years to zero-fill.
 
stevewm said:
Thats not even true anymore...


The "low level format" in SCSI BIOSes will cause any modern drive to do a zero-fill. Only a few VERY OLD drives will do a true low level format...

well that might explain why I can do a Low Level format on my SCSI drives. They are real old. My Adaptec controller has a menu with options to do that. WinXP was reporting them in bad heath and at risk. A format didn't clear it up, but when I did a Low Level with the Adaptec BIOS, it took several hours and the drives turned up as healthy in the WinXP Disk Management console.
 
Back
Top