Very strange problem

btgman

Weaksauce
Joined
Nov 1, 2004
Messages
89
A friend asked me to look at thier computer - it wasn't connecting to the internet.
It's an old (bought in 1998) PC. Not sure of the specs - but it's a Pentium 2 or 3, 128MB SDR, it's got an AGP graphics card but I've never heard of the manufactuer or model ... a sound blaster live! sound card and a sony DVD rom.

Anyway, I tried connecting to the Internet (the comp has a broadband dial up modem). Everytime the computer finished dialing and connected and error message titled 'Kernel 32' popped up and then the comp hangs. I wiped the Hard drive straight away and re-installed windows. Everything went fine. I reinstalled, chipset drivers, garphics driver, sound card driver modem driver and IP software. I tried to connect to the Internet but it couldn't connect and crashed. I checked the device mananger and the PCI communication contoller driver wasn't installed. I put in the driver disc but nothing happens. The DVD rom light is on. The tray opens and closes but nothing else happens. I checked 'My computer' the DVD rom has vanished, I checked the device manager it's not listed there. I opened up the case to make sure it hadn't come unattached from the mobo - all was fine. I unattached and reattached it anyway to make sure. Reboot - still not recognised by the computer. So now my friend hasn;t got a DVD rom and I have no idea why! Any thoughts?

Any help would be very cool. Thanks.
 
try hitting your start button and going into adminstrative tools

then go to computer management

under the storage tab go to disk management

see if it detects the dvd rom in there
 
When the computer starts up, does the BIOS recognize the DVD drive? If not, your problem is most likely a bad connection, incorrect jumper settings, or a bad cable. If it is recognized, check if it is recognized in windows (assuming you're using XP) by going to "start - control panel - system - hardware - device manager". If you don't see it under dvd/cd rom drives, then I'd...

1. shut down the computer
2. unplug the drive
3. power on and start up fully
4. shut down the computer again
5. plug the drive back in
6. start up, and check if windows tries to install drivers for it/sees it.
 
Back
Top