Sep 2, 2008 #1 E EnGbudd n00b Joined Feb 23, 2008 Messages 25 Hi, i have a c2d e6550, i plan on oc'ing it some more but i have just noticed the Vcore is at the highest of its range. It it ok to leave it at 1.5 or should i lower it? just wondering about heat ect. Gonna try get it 3.1 ghz.
Hi, i have a c2d e6550, i plan on oc'ing it some more but i have just noticed the Vcore is at the highest of its range. It it ok to leave it at 1.5 or should i lower it? just wondering about heat ect. Gonna try get it 3.1 ghz.
Sep 2, 2008 #2 H haadij404 2[H]4U Joined Apr 3, 2006 Messages 2,280 i highly doubt the vcore is really at 1.5v and the temps thats low. Anyway stock volts are supposed to be 1.32v or very close to that. Go into bios and set it manually. Getting it 3.1ghz will requre your fsb to be around 450. From my experience the board loses stability at 480.
i highly doubt the vcore is really at 1.5v and the temps thats low. Anyway stock volts are supposed to be 1.32v or very close to that. Go into bios and set it manually. Getting it 3.1ghz will requre your fsb to be around 450. From my experience the board loses stability at 480.
Sep 2, 2008 #3 E EnGbudd n00b Joined Feb 23, 2008 Messages 25 What sort of voltage shall i set it to? around 1.3?
Sep 3, 2008 #4 L lsclincoln Limp Gawd 2FA Joined May 7, 2008 Messages 147 I run my e6550 at 3.4 with voltage at 1.375 in bios.
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
