Unusually slow Dell Dimension 3000

wayout2day

Limp Gawd
Joined
Oct 15, 2006
Messages
170
Dell Dimension 3000 running Win XP HE. It took about 20 hours to load Windows. (Yes, I just let it keep going) Everything runs slow. Reformatted the HDD before all of this. But even programming in memory runs slow.

I have worked on a couple hundred PC's, first time for everything, I guess.

I put in tested RAM--no change.

I suspected a slow CD drive, but everything else still slow.

Ran Dell diagnostics. No problem with memory.

Tested the Power Supply. All numbers within good range.
=============================================

Customer came in with PC Loaded with fur, hair and dirt. Everything was clogged. Vacuumed the PC before pulling the HDD and reformatting. So I am suspecting a damaged Pentium IV 2.8 CPU.

Before I pull that and change it, are there any further tests I can run ??
 
pulled the HDD.....low-level format is going ok....Is there a test for the CPU ?

Doesn't look like the HDD is bad...
 
Boot 32-bit Linux LiveCD or LiveUSB.

1. Inside Linux Linux usually there is memtest+ for memory testing, if still OK, then continue live boot

2. If everything is good inside Linux Live environment, then it is obvious basic computer is no problem. Access the hard disk inside live storage, use Disk Utility to check Disk SMART info. (remember to activate SMART support in BIOS if needed, don't know whether you have such option in Dell Dimension 3000)

3. You can also format the disk using Disk Utility or fdisk. The latest fdisk in Fedora 14 can align partition so you can create the partition inside Fedora Linux and then format using Windows XP (do not delete/recreate partition)
 
Can you try XP using another HDD?

Do you have another s478 CPU to test with?
 
1. I did replace the RAM. So that is not an issue.
2. I low-level formatted the HDD. Since I didn't get any errors there, I am ruling out for now.
3. After the formatting, I tried to reload Windows....a good 2 hours later, still at 39% copying files.

I don't have a test for the CPU. I will look around for another CPU...

Any hints ?
 
It might just be the motherboard going bad.

Check the caps on the motherboard.
 
It might just be the motherboard going bad.

Check the caps on the motherboard.

And have the caps on the motherboard gone bad, I strongly recommend buying a complete new system: Although the Dimension 3000's case accepts microATX motherboards, the case's ventilation capabilities themselves are woefully inadequate to handle the demands of a more modern, up-to-date entry-level configuration. And replacement motherboards for Socket 478 that use DDR1 memory are also no longer available new, and used ones in even decent condition are now much more expensive than they're worth. (Sure, you could replace the motherboard, CPU, RAM, hard drive(s) and PSU - but you'd still be stuck with a cramped case that offers inadequate airflow.)
 
Last edited:
1. I did replace the RAM. So that is not an issue.
2. I low-level formatted the HDD. Since I didn't get any errors there, I am ruling out for now.
3. After the formatting, I tried to reload Windows....a good 2 hours later, still at 39% copying files.

I don't have a test for the CPU. I will look around for another CPU...

Any hints ?

Really sounds like a hdd problem. Although that could be a CD/DVD ROM or the media issue, I still think the hdd might be the problem. Try replacing it with a new good drive and see what happens.
 
Back
Top