uh oh.. computer trouble

Skizzy

Supreme [H]ardness
Joined
Nov 28, 2006
Messages
4,096
So I was planning to overclock, and I did successfully. Then I tried further. Went to 350 mhz bus, (350 * 7). I then changed the DRAM speed from 400 or something I believe, to 800, which is what my RAM is (DDR2 800). I then saved settings and rebooted, and nothing showed up on the monitor. All the fans spun, including the video card. The keyboard lights wouldn't turn on either, nor the mouse optical red light.

What should I do? I don't think its a video card problem, since the video card fan spins, and also since the keyboard and mouse lights don't light up. Maybe it's a RAM issue?

My specs are:
E6300
Foxconn 945P7AA-8EKRS2 Socket T (LGA 775) Intel 945P ATX Intel Motherboard
G.Skill DDR2 800 1g ram
WD 250g HD
eVGA GeForce 7900GS

I also want to try resetting the CMOS on the mobo, but I have no idea how to do it on this one.

Thanks in advance,
Skizzy
 
Look through your manual to find the reset cmos jumper. Or, my prefered way, pop the cmos battery. put it back in about 30 seconds later.
 
There should be a clr-cmos jumper on there somewhere. If all else fails, unplugging the PSU, then popping the mobo battery out for a few seconds oughtta take care of clearing the cmos.

Doh! I type too slow
 
Thanks for the replies, I'll try that now.

Could this possibly fix my problem?

I'll post back with the results.
 
yes...your problem is that the bios is set to settings your computer is not stable at, so every time you turn your computer on it is unable to run at these settings and so it does not turn on. Since it does not turn on, you cannot change the settings, but simply resetting cmos by, as people have said, moving a jumper (don't forget to move it back after) will reset your bios and you'll be fine.
 
Got it, works perfect now. ;)

Anyone know what setting I messed up? Would like my RAM to operate at it's maximum ability (DDR2 800).

Sorry for the sudden off-topicness, didn't want to start a new topic-- but will if needed.

Thanks in advance,
Skizzy
 
You changed the RAM speed from 400 to 800? :eek: My "you fubar'd" sense is tingling!
 
•Memlock index value (Mhz)
This item allows you to set memory clock index value.
What are your choices for this setting? Because DDR2-800 is 400Mhz. Since you're running in dual channel, the effective speed is 2x400Mhz=DDR2-800.
 
Back
Top