Soultaker666
n00b
- Joined
- Sep 3, 2007
- Messages
- 10
I am curious what everyones view is on the Tuniq Tower 120. Is it worth the money? Does it cool well? Let me know please. Thanks.
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
TUNIQ!
- Thread starter Soultaker666
- Start date
Did you search or look for reviews? I don't normally post that...but really, it's not that difficult in this case.
Short answers you're probably looking for: yes yes
It's not the best, but it's pretty good, go buy it. If you're not overclocking though, I wouldn't really bother.
Short answers you're probably looking for: yes yes
It's not the best, but it's pretty good, go buy it. If you're not overclocking though, I wouldn't really bother.
It's cheaper, but beyond the price advantage ( and the mounting bracket ), the Tuniq Tower is better from a performance perspective.
-(Xyphox)-
Supreme [H]ardness
- Joined
- Sep 9, 2004
- Messages
- 6,518
I got one on my Q6600, Runs at 29C at idle
michaLcoughliN
[H]ard|Gawd
- Joined
- Jan 13, 2007
- Messages
- 1,163
download coretemp .95.4 temps will be difference i guarantee it :
I got one on my Q6600, Runs at 29C at idle
29?? I have the tower as well with AS5 & my overclocked idle temp is 47cel.
Ambient temperatures affect core temp...
Overclocking affects temp...
Vcore affects temp..
Form factor affects temp...
L.o.D., how are you even comparing the two?
Not enough information...but seriously, if everyone going to post temps, that at least give enough information for a useful post.
Overclocking affects temp...
Vcore affects temp..
Form factor affects temp...
L.o.D., how are you even comparing the two?
Not enough information...but seriously, if everyone going to post temps, that at least give enough information for a useful post.
What else would you like to know?
Ask & ye shall receive.
my PC case
vcore is just above 1.3.
Q6600@3GHz.
Form factor??
Room temp I would say is currently under 20cel.
Ask & ye shall receive.
my PC case
vcore is just above 1.3.
Q6600@3GHz.
Form factor??
Room temp I would say is currently under 20cel.
Q6600 - B3 stepping (stock right now)
Abit I35 Pro
Antec P180B ; replaced all fans with yate loons (low speed ones)
Tuniq Tower (using stock fan at lowest setting)
I was previously with the old core temp getting an idle temp of 34C which matched up with the Abit uGuru tool. This seemed pretty low for a B3 stepping and I suspected the temps were probably about 10C higher.
With the new core temp, all four cores are 44-47C at idle which still isn't too bad, and seems quite a bit more accurate to me. My case is completely silent more or less which is what I was going for, but it does definitely heat up my office much quicker than my e6600 before it.
edit:
Just a seperate note.. I have central AC, but I also have a window unit in my office and I try to keep the room 74 to 78 degrees F.
Abit I35 Pro
Antec P180B ; replaced all fans with yate loons (low speed ones)
Tuniq Tower (using stock fan at lowest setting)
I was previously with the old core temp getting an idle temp of 34C which matched up with the Abit uGuru tool. This seemed pretty low for a B3 stepping and I suspected the temps were probably about 10C higher.
With the new core temp, all four cores are 44-47C at idle which still isn't too bad, and seems quite a bit more accurate to me. My case is completely silent more or less which is what I was going for, but it does definitely heat up my office much quicker than my e6600 before it.
edit:
Just a seperate note.. I have central AC, but I also have a window unit in my office and I try to keep the room 74 to 78 degrees F.