• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

thermalight 120 ultra

ryu4000

Weaksauce
Joined
Jan 20, 2009
Messages
127
im looking into fans for the true cause all i got is the stock one would this one better air cooling Scythe SFF21F or maybe some other fan from new egg thanks for the advice
 
edit: I think I misunderstood you. Below I assume you got a stock fan for the TRUE but I now think you are saying that you have a TRUE and no fan for it and all you have is the stock intel heatsink fan ? If that is correct that scythe would be a fine fan with a good balance between performance and noise. The scythe is a 3 pin fan so your motherboard needs to have options for CPU fan speed control, check your manual, because the motherboard is expecting a 4 pin pwm controlled fan. If the motherboard bios has a setting like "legacy fan speed control" or "voltage fan speed control" for the cpu fan you are good. If not the fan will likely run at 100% all the time and make more noise than necessary.
------------------------------------------------
Why spend money if you do not have too ?

What are your temps now ? What equipment do you have ? (You might want to make a sig - go to the UserCP and edit your signature making a list of what cpu, motherboard, etc. etc. just the basics for now). Are you overclocking or want to OC later on ?

I am cheap, if the stock fan will do the trick I would not run out and blow $15+ on a fan that would not give you any benifits. It is nice to have a spare laying around.

Here are the specs on the stock fan for a TRUE
http://www.thermalright.com/new_a_page/product_page/cpu/u120ex-1366rt/product_cpu_cooler_1366rt.html
Fan
Dimension: L120*W120*H25mm
Bearing type: FDB (Fluid Dynamic Bearing)
Rated Speed: 1600RPM
Noise Level: 28.0 dBA
Air Flow: 63.7CFM

Thats a pretty decent fan. Good quality, with a decent CFM at a low RPM which means it will push a fair amount of air without a lot of noise. If you do decide to buy another one make sure you get a higher rpm fan with a greater CFM otherwise you will not see any improvement in cooling.

------------------------------------------

The Scythe has the exact same specs and makes me wonder if the stock is not a scythe LOL.

Fan Size 120mm
Bearing Type S-FDB (Fluid Dynamic Bearing by SONY Corporation)
RPM 1600 RPM
Air Flow 63.7 CFM
Noise Level 28.0 dBA
Power Connector 3-pin (4-pin adaptor included)
Color Black

---------------------------------------------------

Thermalright now sells fans, notice how the rpms and CFM increase in the lineup.

http://www.thermalright.com/new_a_page/product_page/fan/product_tr_fdb_fan.html

The 1600 rpm seems to the the stock one used on the i7 version of the TRUE, so the 2000 rpm would be a high performance upgrade.



Any hope all this helps, if you dont have a fan that scythe will likely be very good.
 
sweet, wow an i7 (mutters "lucky bastid" under my breath) .

I edited my post with some more info. Bottom line if your HS came with a fan the scythe is almost exactly the same and would not be any improvement. If no fan the scythe is a good choice as it has the exact specs of the stock TRUE for the i7. If you want to upgrade/high performance look for a 2000 rpm fan.

Since I watercool I must admit I am not a big fan expert as I go for quiet low speed fans so hopefully some others here that use a lot of fans will have other ideas.

OMG if that is your load temps with coretemp etc. jeez you are sitting pretty. Very nice.
 
if i game my temps dont even hit 40 most it hit is 38 anyways thanks for the advice.
 
Back
Top