The Post Pics Of Your Rig Thread! - ABSOLUTELY NO COMMENTS

Status
Not open for further replies.
Here is mine. Looking to get some upgrade though >.<

DSC08441.jpg


DSC08080.jpg


DSC08084.jpg


DSC08087.jpg


Just got this too!!!

DSC08427.jpg


DSC08428.jpg


Then my other SFF PC. Im installing xp pro x64 atm

039.jpg
 
Like the title says, please rate my cable management skills, i have been doing this for a while now and i think i have gotten pretty good at it, i sell PC's at my store with custom cable management and people love it, i want to know people's opinion, please rate it, thanks.
 
sry for loads of pics. but i finally got a chance to clean my comp up and add the little touches :) hope u like it

computerroom30-9.jpg

IMG_2489.jpg

IMG_2665.jpg

IMG_2668.jpg

IMG_2667.jpg

IMG_2661.jpg


IMG_2658.jpg

i used fishing line to support my heatsink

IMG_2657.jpg

IMG_2652.jpg

IMG_2649.jpg

IMG_2647.jpg

IMG_2644.jpg

IMG_2641.jpg

IMG_2632.jpg
 
I got tired of all red so I decided to try something a bit different...

IMG_2933.jpg


IMG_2893.jpg


IMG_2904.jpg


These are the only wires visible in my case :D

IMG_2896.jpg


I'm thinking I might make some custom pieces to go inside the case out of Lexan... unless I find a material I like better.
I also just picked up a Xigmatek HDT-S1283 and threw that in.

and here it is with my blue fans... I can't decide :confused:

WhiteRedandBlue2.jpg
 
Here's some pictures for now, I'm not as skilled with the camera as I could be but I couldn't resist playing around and getting a few pictures posted to get my feet wet.

One of my favorite angle shots showing off the paint job:


A look at the top of the case from an angle:


A look from head-on, another one of my favorite shots showing off the mesh:


A close-up shot of the bottom left corner of the front panel, and my power button. ;)


A look from up above, nothing special, just wanted one from this angle:


Another one of my favs, see the monitor reflection in the side panel? :D


A look at how close the top of the Accelero is to the top cross-bar in the case, I had the angle the card in to fit the fins into the case and under that bar...a damn close fit:


A shot from the bottom of the case, showing how little space there is between the Ultra-120, Mosfet heatsink and the Accelero:


Looking through the left side panel...showing that there is next to no space from another/a larger fan on the Accelero S1 Rev2:


I'll get some more pictures in the next couple days with the case panels removed so you can see inside the case a little better, but I wanted to get some good/better pictures of the paint job posted before I relax and actually start enjoying the system.

There's still a little work I want to get done, so don't worry...there will be more updates to come in the next week and a half.
 
Yesterday I completely disassembled my system ...
I replaced in some places Paxmate with AcoustiPack ...
I removed the dust ...
I made holes in the bottom of the case, and I attached a set of wheels LianLi WB-01 ...
I put a pair of cold cathode Vantec NXP-301 ...
I rebuilt the WM
 
Thats pretty sweet, im guessin you made that front bezel for the dvd drive?




Case is a TT Mambo, got it for like 10 bucks on a combo from newegg.
 
I don't know how you guys end up taking such good photos of your rigs. This is the best I could come up with.

Lian_Li_photoshoot_1.jpg

-
Lian_Li_photoshoot_2.jpg

-
Lian_Li_photoshoot_3.jpg

-
Lian_Li_photoshoot_4.jpg

-
Lian_Li_photoshoot_5.jpg

-
Lian_Li_photoshoot_6.jpg
 
pretty much as it sits now.

PA240817.jpg


PA240819.jpg


RAID0_2.jpg


PB100336.jpg


PB100334.jpg


P7110221.jpg


older (but lets you see some of the other mods)

P4090170.jpg


P4090168.jpg


P3210156.jpg


P4090164.jpg


and a few of my other stuff.

PA240820.jpg


P2090095.jpg
 
how did u spray paint that stuff so good?

i finally have both of my quad rigs up. specs in the sig. messy i know but i always end up removing and adding so much stuff its just not worth it :p lol

DSCF0130-2.jpg


DSCF0126-3.jpg
 
Here's my updated system. I'm using one case fan, the stock cooler on the graphics card and the fan in the PSU and thats it. Hard drives are suspended with elastic in the 5.25" bays to further quiet the system. Temps are great even with the CPU overclocked. Total and complete silence :)

Picture1004.jpg
 
2436392330085909719S600x600Q85.jpg

2880515100085909719S600x600Q85.jpg

2503998750085909719S600x600Q85.jpg

2300305890085909719S600x600Q85.jpg

2795270180085909719S600x600Q85.jpg

2267926490085909719S600x600Q85.jpg

2896699790085909719S600x600Q85.jpg

2560576230085909719S600x600Q85.jpg


Still got to do the sata power mod, add more white lighting and eventually WC that damn thing but going to cost a good buck for 2 loops. Also thinking of adding another 8800 Ultra for Tri-SLI :confused:
 
2894342034_1567083002_o_d.jpg

2893501109_f45c2908f9_o_d.jpg

3028920234_1c4e0d707d_o_d.jpg


Camera sucks and this computer is getting dated :rolleyes:. Don't feel a need to upgrade (plays TF2 fine maxed out at 1920x1200 and 60fps. 30fps 1920x1200 and High settings in Crysis. Curious how GTA4 will run).

Might buy a new desk too sometime (and a IBM Model M and some nice mouse and pad). All crap to buy in the future, probably will around the same time as new components.
 
DSCF0445.jpg
[/IMG]
Intel Core2 Duo [email protected], EVGA 780i MB, 4GB DDr2@1000ghz, Geforce 8800GTS G92 SLI, Swiftech H20 Kit,Triple Rad,Viper John 780i NB Waterblock Kit, Dual D-tek GPU G92 Waterblock and Unisink, DangerDen Dual Bay Reseviour, Cooler Master Ram Cooler, Silverstone Black Aluminum JB09 Tower, PCP&C 750watt PSU
 
Outside shot


Insides needs more wire management




Asus PHW DH Deluxe Motherboard
Q6600 B3 Stepping
2 gig Corsair
Ati 4850 512
250 gig
 
Antec Nine Hundred Ultimate Gaming Case
Intel Core 2 Quad Q9550 overclocked to 3.4GHz
Arctic Cooling Freezer 7 Pro CPU Cooler
Asus P5Q Deluxe Motherboard
4GB DDR2 Ram
Nvidia Geforce GTX 280
500GB HDD
Thermaltake High Performance 850W PSU
Microsoft Windows Vista Home Premium 64-Bit
Saitek Eclipse 2 Illuminated Keyboard
Razer Diamondback G3 Mouse

251120081279lh5.jpg


251120081280no0.jpg


251120081281mu9.jpg


251120081282cb4.jpg


251120081283ic9.jpg


251120081284ds7.jpg


251120081286ql1.jpg


251120081289na3.jpg


251120081290qj2.jpg


251120081291zh9.jpg


251120081292kf0.jpg


251120081293is0.jpg


251120081294cw1.jpg


251120081295fw6.jpg


251120081296mf6.jpg


251120081298zz6.jpg


251120081299dj0.jpg


251120081300pp2.jpg


251120081301oe7.jpg
 
This is a spare SFF I completed for Folding (and to match my NSK4480!)

-Sorry I don't post too many pics so I don't know how to resize-





http://img219.imageshack.us/my.php?image=img1996jr8.jpg
http://g.imageshack.us/img219/img1996jr8.jpg/1/


------

Here are the specs:


Antec NSK3480 Micro-ATX Case with Antec Earth Watts 380 watt PSU
(2) 100mm Scythe 1000rpm for intake
(1) Scythe 120mm 800rpm exhaust
Intel Core2Quad Q6600 G0 Stepping
Sunbeam Core Contact Freezer CPU Cooler (Awesome AND Quiet!)
Gigabyte G31 Micro-ATX motherboard - Had for a while but never used and is new from RMA
2Gb Corsair PC2-8500
BFG 8800GT 512Mb with Arctic Cooling Accelero S2
Seagate 400Gb Serial-ATA 3.0/gbps
Sony-Optiarc 20x DVD-RW - ATA
 
Status
Not open for further replies.
Back
Top