• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

The Coolermaster Gallery

@NV-man , nice :) but you have to do something bout the white CD drives :(



My Updated rig :

6023side-dunkel.jpg


6023side-dunkel-offen.jpg


6023chipset.jpg


6023side-dunkel-offen-pumpe.jpg


6023side-dunkel-offen-winkel.jpg


UV Light on :

6023side-uv.jpg


6023side-uv-rot.jpg


6023side-uv-cpu.jpg


6023uv-pumpe.jpg


6023side-uv-board.jpg


6023graka-uv.jpg


6023l_fter-blau.jpg


6023l_fter-rot.jpg


6023aquatube.jpg


Disks :

6023disks1.jpg


6023radi-innen.jpg


6023front11.jpg
 
NV-man said:
Here is my rig:
and another shot:
Click to expand...
hey how are your temps in that case?

looking at all these cases makes me wanna get a praetorian/ATC case but my heatsink wont fit in them :(
 
My temps are very good actually! that ATC-210 only has two case fans but even with that limitation everything runs acceptably well, here's a rundown:
3400+ newcastle: 49C with Xp120
System temp: hovers at around 32-34C
HDD: 30-35C
PWMIC: 38C
Geforce 6800GT: idles @ 53C
 




I just got the case a few days ago, still have a ton of cleanup to do on it, but also thinking of what else to jam into it, thinking maybe a USB card reader for the floppy drive slot. Oh and the lighting on the front really sucked cause of the flash :eek:
 
Very creative with the fans in the front bro! Are there 4 fans on the front then?!
 
Stellar said:
I believe he was referring to the fact that you put two beige drives in an otherwise nice looking black case.
Click to expand...
first off, those drives are grey, not beige, and second of all, I got those 2 drives for free when my grandma's old Sony Vaio's mobo, psu, and cpu got fried in a lightening storm so she got a new HP and gave me the old computer where I salvaged the drives and some other parts that I didn't use.
 
Jodiuh said:
Very creative with the fans in the front bro! Are there 4 fans on the front then?!
Click to expand...

2 in the front pushing and 2 in the back pulling. 4 Yate Loons in total for a quiet cooling solution.

Ofcourse all of this thanks to my man Mike Brady. This wouldn't have been possible if it wasn't for him.
 
Just got me a Centurion 5 a few days ago, absolutely awesome case.

Pics:
10003768ny.jpg

10003771ll.jpg

10003828yc.jpg

10003836zu.jpg

10003842mh.jpg

10003876dw.jpg

10003923df.jpg

10003950bg.jpg

10003967yg.jpg

10004270lm.jpg


I know the floppy's not black, but it's the best I could do on such short notice. I hope to pick up some vinyl dye within the next week or two and dye my CD-RW and floppy black. Of course, I may just get a DVD-RW drive. Only time will tell...

BTW, it's impossible to get a good running shot of the LED fans with the side panel on, without the flash it comes out fuzzy and with the flash the light doesn't show.
 
Crap:p.

Celeron 2.4@3GHz with SI-120, 1GB PC133@166MHz, ASUS P4B, Sapphire Radeon 9600 256MB o/ced to 420/420, SBLive! 5.1, random 10/100 and USB2.0 cards, LG DVD-ROM, 12/8/32 LG CD-RW, 400W no-name PSU.

I try to make up for its crappiness by overclocking the pants off of it, but it still doesn't run great, although I can run FEAR smoothly at 800x600 :).
 
heres my blue wavemaster in a build last year with my embarrassingly bad window mod. antec 550 tru control 12/5/3.3v control panel on top, 2 opticals with aluminum coolermaster bezels(nice) and some jive thing with usb/sata/audio/flash card/video ports. i have since up?graded to a gigabyte 3d aurora and i am replacing the window in the wavemaster putting in a spare crapteron on a dfi ultra d when it gets back from rma. i will try to make some kind of relatively quiet pc, i am starting to run out of reasons to keep building pcs. you can just barely see the lian li pc60usb in the lower right.



18630258_9f50a108a7.jpg
 
Here is a pick of my ATC-220b-AX1 (this is before I got my 2005fpw, or my XP120, or my PCP&C 510W Sli PSU, lol)
p22100337gx.jpg

Here is my ATC-710SX2
out
pc0600289ek.jpg


ANd I'll post some pics of my ATC-110SX2 when it arrives it still hasn't shipped
 
latest.jpg


Latest picture. I'm just waiting for some cabling stuff to come in so I can hide my internal USB/firewire cables better, to figure out whether I can do better than the Vantec fan controller, and then I just need 4 more 320gb drives to put in the bottom and I'm good :D Soon enough my cabling should be clean enough to post good pics of!
 








Well there you have it. Galaxy 3.0, MiniGalaxy, and Galaxy 1.0
 
Hm...no pictures yet of the red-headed stepchild of the Cooler Master lineup, the Ammo 533. Guess I'll have to change that when I get my new and improved Ammo 533 system up and running... :D
 
Shorehn said:
Hm...no pictures yet of the red-headed stepchild of the Cooler Master lineup, the Ammo 533. Guess I'll have to change that when I get my new and improved Ammo 533 system up and running... :D
Click to expand...


I guess I'm gonna have to go buy one :D
 
Yea definitely go for it, that case retailed for aver 140 dollars when it came out, so for 76 it's a steal, and yea it looks damn sexy!
 
The new Ammo is pretty cool, I saw it at microcenter. The handle on top would be great for lanning.
 
Here's a question for you guys.

Is there a lan party bag that will fit my stacker?

CM Site dimensions: L584 x W227 x H536mm
Newegg dimensions: 23" x 9" x 21"

Theremaltake Xaser Bag A1700 - Recommended size of chassis (H x W x D) 20.5 x 8.1 x 22.4 inches
Sunbeam LAB-R - Big Tower 550 x 205 x 570mm , 538 x 220 x 490mm

I'm gonna go by compusa and check that one out cause it's close and I've got a lan to go to on Friday. Hope I can squeeze it, cause this thing is NOT fun to carry.

Any other ideas guys? Maybe something in the luggage isle at Wal-Mart?

Found some great pics here.
 
Jodiuh said:
Is there a lan party bag that will fit my stacker?

I'm gonna go by compusa and check that one out cause it's close and I've got a lan to go to on Friday. Hope I can squeeze it, cause this thing is NOT fun to carry.
Click to expand...

I have the large size geargrip one and it fits my Antec SX1240 just fine, which is about 3" taller and I'm betting the same width. I'm not sure how much your system weighs but one thing I found out is that a heavy system even with a nice bag/case carrier is still a heavy system. Lan on :D
 
hokatichenci said:
I have the large size geargrip one and it fits my Antec SX1240 just fine, which is about 3" taller and I'm betting the same width.
Click to expand...

Ah, I forgot all about that one. Lol, and I actually have 2 shields by caseace and the small gear grip. Do you have the dimensions of that case by chance?
 
Jodiuh said:
Here's a question for you guys.

Is there a lan party bag that will fit my stacker?

CM Site dimensions: L584 x W227 x H536mm
Newegg dimensions: 23" x 9" x 21"

Theremaltake Xaser Bag A1700 - Recommended size of chassis (H x W x D) 20.5 x 8.1 x 22.4 inches
Sunbeam LAB-R - Big Tower 550 x 205 x 570mm , 538 x 220 x 490mm

I'm gonna go by compusa and check that one out cause it's close and I've got a lan to go to on Friday. Hope I can squeeze it, cause this thing is NOT fun to carry.

Any other ideas guys? Maybe something in the luggage isle at Wal-Mart?

Found some great pics here.
Click to expand...



The Xaser bag fits the stacker. I tried it for shits and giggles one day.
 
it not done, just since everything is working except the front audio port. working correctly anyway. ive had no desire to take it apart again and try redoing the wiring at this moment. for some reason my window did not come with the logo. i was gonna etch a spear and and shield and body to try to match the logo. but since thats not there. i think im gonna make my own design,,, and either try to etch it, or have a uv reactive sticker made for me.

my snake wrestling pic, i left the protective film on till i finish the wiring.

question, on the front audio port, i plugged it into the mobo the only way it fit. and while it worked. there was maybe only 10% sound coming out the right speaker for my headset. plugging into the back audio ports solved this problem. now i plugged my audigy and wanted to try to plug the audio into that to see if it was a mobo problem or just a bad set of wires. anyone else have that problem? not sure i can get that replaced by them, might have to rewire it myself...

P1010009-vi.jpg
 
Ockie said:
The Xaser bag fits the stacker. I tried it for shits and giggles one day.
Click to expand...

Oh you freaking made my day! A couple of the reviews I read showed a nice little cushion on the shoulder strap. I go get thee now!
 
Fawkes said:
Nice night for a hernia... :D
Click to expand...

Oh hell no, dude. I pull it like a dog. :p Maybe I should get some monster wheels for it so I can go off roading?
 
hokatichenci said:
latest.jpg


Latest picture. I'm just waiting for some cabling stuff to come in so I can hide my internal USB/firewire cables better, to figure out whether I can do better than the Vantec fan controller, and then I just need 4 more 320gb drives to put in the bottom and I'm good :D Soon enough my cabling should be clean enough to post good pics of!
Click to expand...

Where did you get the extra 4-in-3 module?
 
moralpanic said:
Where did you get the extra 4-in-3 module?
Click to expand...

It came with a 4 in 3 module, which is currently not installed in it. Those are I-Star 4 in 3 SATA hotswap cages for my Areca 1220 raid card + 4x WD 320gb Raid Edition. You can order 4 in 3 modules from CM directly.
 
hokatichenci said:
latest.jpg


Latest picture. I'm just waiting for some cabling stuff to come in so I can hide my internal USB/firewire cables better, to figure out whether I can do better than the Vantec fan controller, and then I just need 4 more 320gb drives to put in the bottom and I'm good :D Soon enough my cabling should be clean enough to post good pics of!
Click to expand...


What is the green lights at the right of your case ?
 
Those are for his hotswap bays. When the light is green, that is good.
 
Bbq said:
Those are for his hotswap bays. When the light is green, that is good.
Click to expand...

Hotswap bays ??? Sorry I don't understand. What is the name of this product ?
 
theres a Hard drive inside each of those "green light bays" When the light is green, it means that the drive is working properly. when it goes red its a bad thing, and he gets a headache.

the bennift of hot swap is u can pull out any of those trays and the system will work fine with out. take that bay apart stick a bigger drive in, and pop it back in and it will continue to work just like nothing happened.
 
You must log in or register to reply here.
Back
Top