Task Force 71-Piece Screwdriver Set $9.99 @ Lowes

King of Heroes

[H]ard|Gawd
Joined
Mar 26, 2008
Messages
2,006
Found at Slickdeals.net

http://www.lowes.com/lowes/lkn?action=productDetail&productId=278734-16878-60708

As far as PC hardware installation and repair go, I've never needed more than various sizes of Phillips head screwdrivers. So a set like this could last you for life, and the price is excellent.

On the flipside, I've never heard of Task Force. It sounds like a Lowes in-house brand. I can't say what the quality of this set will be.
 
You don't need high quality for computers, generally, because the amount of torque we use is quite low.
 
You don't need high quality for computers, generally, because the amount of torque we use is quite low.

quite low?? I personally torque each screw to 105 ft-lbs -- wait no, that's lugnuts ....

yes I suppose torques for computer fasteners are quite low ;)
 
i think i may pick one of these up today on my way to a birthday party. thanks op!
 
im pissed, needed a new torx set and looked around and ended up finding a nice set at sears with an adjustable wratchet driver for around ten or fifteen and now this huge set for ten bucks, what a great deal.
 
I was a Lowe's today buying Christmas lights and I picked up a set. They were still marked $19.98 in store, but they rang up at $9.98. It's a cheapy made in China set, but at that price who cares. Thanks OP.
 
Lower left hand corner of package, lifetime warranty. Another "Deal of the year" candidate, thanks OP!
 
Wow, thanks. Free shipping too, but i'm going to pick it up.
 
Bought for the Dad.

I can pick up extra's for those who'd like them only at cost of gas since i kinda have to drive like 10 miles to get to the nearest Lowes.
 
Picked one up today as well. I would advise anyone buying this to inspect the package to make sure everything is there. When I first bought it, I looked it over in the car and noticed that one of the Phillips head bits was missing. Was able to exchange for another one without issue though.
 
all of my screws are torqued to 250 lb.ft with a 36" breaker bar

"breaker bar" or as my old shop teacher used to say "GDmmt bar" :p

for $10 this thing is a steal, tho I'm sure there are 70+ parts, the one that you really need will be the 1st to break :eek:
 
*Please let it be at my local lowes store.*

wait a minute... it went from $9.98 w/out my zipcode, to $20.28 with my zipcode - and it says "new lower price"... "was $19.98" WTF???

v4nxcm.jpg


(yeah, I know, alaska and hawaii pricing, but how can 20.28 be a lower price from 19.98???)
 
picked up a set yesterday, seem to be decent quality. for 10$ i have everything i need, and dont have to wander around the house looking for my dads set lol. good buy! and for computers, i used a 6$ pc kit from compusa and those where really cheap lol. Thanks op
 
I received a TF toolbox that came with all of the red screwdrivers. They don't feel cheap at all and I never questioned their quality. For a basic set to have around the house this is a steal.
 
*Please let it be at my local lowes store.*

wait a minute... it went from $9.98 w/out my zipcode, to $20.28 with my zipcode - and it says "new lower price"... "was $19.98" WTF???

v4nxcm.jpg


(yeah, I know, alaska and hawaii pricing, but how can 20.28 be a lower price from 19.98???)

bwahahaha. I get that too. They have some smart "webmasters" there :p

I wonder if the local store will match the online price?


when I added it to my cart and went to the checkout....
Now $20.28
Was $19.98
You save 100%

wtf?
 
Don't need more tools...superfluous...don't even have a cordless drill yet...

Who am I kidding? I'm a dude, and I require MOAR TOOLS.
 
Task force is the biggest garbage you can buy. I recently bought into them because of the cost, after stripping these cheap Chinese made screw drivers numerous times, breaking two hammers (WTF, talk about a potential serious injury) and catching a drill of theirs on fire, I would say that I would have to pass on this, even if it was free.

For most people doing basic home tasks this should be fine, but be warned if you are going to do any type of renovation, construction, or if you really use your tools to their full potential.

Lets not even get to their locks, I went nuts locking everything, just to find out that their cheap tin keys breaks off like butter.

PS, dont do framing with their hammers, drill concrete with their drills, turn out locktite screws, or turn out some old bolts. That would be my taskforce safety tip of the day. You get what you pay for.
 
Task force is the biggest garbage you can buy. I recently bought into them because of the cost, after stripping these cheap Chinese made screw drivers numerous times, breaking two hammers (WTF, talk about a potential serious injury) and catching a drill of theirs on fire, I would say that I would have to pass on this, even if it was free.

Meh, I've caught a DeWalt on fire too... You'll always have people with issues on every brand out there.
 
Meh, I've caught a DeWalt on fire too... You'll always have people with issues on every brand out there.

I can't agree with this statement. When you have cheap Chinese tin used for items such as these, I find it really hard to argue the "You'll always have people with issues on every brand out there".

I have yet to break a Snap-On set for example or a Klein Tools, Inc tool. Yes, I have broken Craftsman tools, but typically thats rare and it's honored by an excellent warranty (walk into a craftsman shop, walk out with a brand new tool).

Yes, someone will always complain, but when you have an item where it can't even perform to it's expected function (and even pose a risk to the user, such as the hammer head that hit me in the face when it broke), thats where you have to draw the line.
 
I can't agree with this statement. When you have cheap Chinese tin used for items such as these, I find it really hard to argue the "You'll always have people with issues on every brand out there".

I have yet to break a Snap-On set for example or a Klein Tools, Inc tool. Yes, I have broken Craftsman tools, but typically thats rare and it's honored by an excellent warranty (walk into a craftsman shop, walk out with a brand new tool).

Yes, someone will always complain, but when you have an item where it can't even perform to it's expected function (and even pose a risk to the user, such as the hammer head that hit me in the face when it broke), thats where you have to draw the line.

This is what you use to give people when they need to borrow tools, and keep the Craftsmen/Husky for yourself.
 
Careful with Husky. They have good stuff (as told by the same old "It costs HOW MUCH?" price tag) and also Chinese crap. I still like them but their stuff is not all good.
 
Lol, yeah, I'm a fan of SOME craftsman tools. Did twist a wrench like it was butter, but they're good about their warranty.
 
such as the hammer head that hit me in the face when it broke

WTF? What were you doing? Story, please.

I prefer Stanley for hand tools. Yes, they're a bit pricey, but I have yet to have one break. I did strip the gears out of a ratchet a while ago, but it was a cheap set and I was overusing it.

I love my Kobalt 16oz claw hammer, it was less than $20 and does a great job.

Offtopic, how does one keep things like interchangeable screwdriver bits from rusting? They're made out of iron or some type of cheap steel, and my skin and sweat are pretty acidic, and after owning and using bits for less than 6 months, they tend to rust all over the outside. Sucks. These were Stanley bits, too.
 
[Tripod]MajorPayne;1033458243 said:
I love my Kobalt 16oz claw hammer, it was less than $20 and does a great job.

I have that same one and I also like it. Mainly because it hasn't broken in my face. Or away from my face. Otherwise it's just a hammer, though the grip on the handle has stayed in good condition better than some of my other (and even cheaper) hammers.
 
Back
Top