Case study.
customer brings in emachines computer and says it won't boot. i opnened it up and look around and see the hsf is loose in the case with the processor sitting in the drive bay. *rolls eyes*
now i ask. "what have you been doing with your pc sir" - to which he replies (he's about 16-19 or so) " my copy of PC magazine showd how to upgrade and PC with a new processor and i tried it - i just popped off the whole cpu and fan that was on it together".
my reply
well here's the thing. you have to first take off the heat sink (when grounded) and carefully remove it, and cafefully remove the actual ceramic chip from the cpu socket with the retaining arm and carefully pull it out/remove thermal pad with proper alchohol...yadda..yadda (the whole nine yards). basically how to do this 'properly' and install it properly seeing as he totally must have misread the article or didn't pay attention to it.next day i get to his unit and notice that the mainbard has a broken/lost capacitor. ok- i look for it and can't find it anywhere. i have some capacitors so on with my soldering gun and to task i go. get it all ready and go to the processor install and notice it's an xp3200 barton. the board is a KM266 ecs model that emachines used for this paticular model. i ask about his warranty status and he say's no joy. year is up - way up. so since i know this emachines unit with this km266 board will not work with the xp3200 i ask what he want's to do. he says he will bring me his other processor for now and i can go ahead and use that one. i say coo'. brings it in and i test it on the test unit (xp2400) and it's ok/ onward we go. then as i boot the power supply gives a nice spark and poof it goes. nice. now i pull the board out and notice other damage that with a magnifying glass that i had not seen before *rolleyes again*
I pull the board out and give it the midas inspection. it's been abused like a bourbon street hooker. ok then,after testing with various apparatus of electronics i can dead on say the board is bad, and the power supply is shot. here's where it get's interesting.....
here is the km266 ecs boards is listed on the emachines site L7VMM2
http://parts.emachines.com/emachines/Moreinfo.asp?Product_Id=68980
Note the price of that thing as $149.95. Huh? I say Huh? WTFMFHOLYS! *%^!
ok, what we have here is emachines wanting to jack the customer for a custom emachines oem bios basically. the board has the oem bios that will detect a non-oem equipment and operating system (i have seen it before with hp/compaq/dells) *rolleys*. i would like to be able to get his older processor to boot with a brand new emachines version of the km266 board for this price-
http://www.computernyc.com/ecsk7amamdk7.html
i never could find that emachines board with the custom emachines bios chip. so I ended up just selling the guy the older lanparty case with the antec 350 true blue, and an nforce2 motherboard,and we used the xp3200 barton, and transplanted all of the drives, and got an oem copy of xp. he's much - much happier now. i still can't believe that price on an oem ecs km266 via motherboard, and they would not budge from that price. only thing is that for now he running async until next well when he plans to get some PC3200 so he can be at 200/200.
customer brings in emachines computer and says it won't boot. i opnened it up and look around and see the hsf is loose in the case with the processor sitting in the drive bay. *rolls eyes*
now i ask. "what have you been doing with your pc sir" - to which he replies (he's about 16-19 or so) " my copy of PC magazine showd how to upgrade and PC with a new processor and i tried it - i just popped off the whole cpu and fan that was on it together".
my reply
well here's the thing. you have to first take off the heat sink (when grounded) and carefully remove it, and cafefully remove the actual ceramic chip from the cpu socket with the retaining arm and carefully pull it out/remove thermal pad with proper alchohol...yadda..yadda (the whole nine yards). basically how to do this 'properly' and install it properly seeing as he totally must have misread the article or didn't pay attention to it.next day i get to his unit and notice that the mainbard has a broken/lost capacitor. ok- i look for it and can't find it anywhere. i have some capacitors so on with my soldering gun and to task i go. get it all ready and go to the processor install and notice it's an xp3200 barton. the board is a KM266 ecs model that emachines used for this paticular model. i ask about his warranty status and he say's no joy. year is up - way up. so since i know this emachines unit with this km266 board will not work with the xp3200 i ask what he want's to do. he says he will bring me his other processor for now and i can go ahead and use that one. i say coo'. brings it in and i test it on the test unit (xp2400) and it's ok/ onward we go. then as i boot the power supply gives a nice spark and poof it goes. nice. now i pull the board out and notice other damage that with a magnifying glass that i had not seen before *rolleyes again*
I pull the board out and give it the midas inspection. it's been abused like a bourbon street hooker. ok then,after testing with various apparatus of electronics i can dead on say the board is bad, and the power supply is shot. here's where it get's interesting.....
here is the km266 ecs boards is listed on the emachines site L7VMM2
http://parts.emachines.com/emachines/Moreinfo.asp?Product_Id=68980
Note the price of that thing as $149.95. Huh? I say Huh? WTFMFHOLYS! *%^!
ok, what we have here is emachines wanting to jack the customer for a custom emachines oem bios basically. the board has the oem bios that will detect a non-oem equipment and operating system (i have seen it before with hp/compaq/dells) *rolleys*. i would like to be able to get his older processor to boot with a brand new emachines version of the km266 board for this price-
http://www.computernyc.com/ecsk7amamdk7.html
i never could find that emachines board with the custom emachines bios chip. so I ended up just selling the guy the older lanparty case with the antec 350 true blue, and an nforce2 motherboard,and we used the xp3200 barton, and transplanted all of the drives, and got an oem copy of xp. he's much - much happier now. i still can't believe that price on an oem ecs km266 via motherboard, and they would not budge from that price. only thing is that for now he running async until next well when he plans to get some PC3200 so he can be at 200/200.