Take a look at this

zone_86

[H]ard|Gawd
Joined
Aug 18, 2003
Messages
1,281
Case study.

customer brings in emachines computer and says it won't boot. i opnened it up and look around and see the hsf is loose in the case with the processor sitting in the drive bay. *rolls eyes*

now i ask. "what have you been doing with your pc sir" - to which he replies (he's about 16-19 or so) " my copy of PC magazine showd how to upgrade and PC with a new processor and i tried it - i just popped off the whole cpu and fan that was on it together".

my reply

well here's the thing. you have to first take off the heat sink (when grounded) and carefully remove it, and cafefully remove the actual ceramic chip from the cpu socket with the retaining arm and carefully pull it out/remove thermal pad with proper alchohol...yadda..yadda (the whole nine yards). basically how to do this 'properly' and install it properly seeing as he totally must have misread the article or didn't pay attention to it.next day i get to his unit and notice that the mainbard has a broken/lost capacitor. ok- i look for it and can't find it anywhere. i have some capacitors so on with my soldering gun and to task i go. get it all ready and go to the processor install and notice it's an xp3200 barton. the board is a KM266 ecs model that emachines used for this paticular model. i ask about his warranty status and he say's no joy. year is up - way up. so since i know this emachines unit with this km266 board will not work with the xp3200 i ask what he want's to do. he says he will bring me his other processor for now and i can go ahead and use that one. i say coo'. brings it in and i test it on the test unit (xp2400) and it's ok/ onward we go. then as i boot the power supply gives a nice spark and poof it goes. nice. now i pull the board out and notice other damage that with a magnifying glass that i had not seen before *rolleyes again*

I pull the board out and give it the midas inspection. it's been abused like a bourbon street hooker. ok then,after testing with various apparatus of electronics i can dead on say the board is bad, and the power supply is shot. here's where it get's interesting.....

here is the km266 ecs boards is listed on the emachines site L7VMM2
http://parts.emachines.com/emachines/Moreinfo.asp?Product_Id=68980

Note the price of that thing as $149.95. Huh? I say Huh? WTFMFHOLYS! *%^!

ok, what we have here is emachines wanting to jack the customer for a custom emachines oem bios basically. the board has the oem bios that will detect a non-oem equipment and operating system (i have seen it before with hp/compaq/dells) *rolleys*. i would like to be able to get his older processor to boot with a brand new emachines version of the km266 board for this price-

http://www.computernyc.com/ecsk7amamdk7.html


i never could find that emachines board with the custom emachines bios chip. so I ended up just selling the guy the older lanparty case with the antec 350 true blue, and an nforce2 motherboard,and we used the xp3200 barton, and transplanted all of the drives, and got an oem copy of xp. he's much - much happier now. i still can't believe that price on an oem ecs km266 via motherboard, and they would not budge from that price. only thing is that for now he running async until next well when he plans to get some PC3200 so he can be at 200/200.
 
i told him i could try just transplanting his emachines bios into another ecs km266 board just like it, but he really wanted the upgrade. so i suggested an abit nf7-s and shuttle an35n. we used the shuttle since he didn't need sata and he has an augigy 2 zs. i did pluck the bios and chipset heat sink out of it though just in case i or anyone else needed it.
 
why would you want to put a board back in there with a proprietary emachinces bios anyways? you did the right thing, gave him a new mobo and psu... you probably could have fit them into his e-machines case though
 
The HP/Compaq/Dells don't use the BIOS to actually identify OEM hardware. They use a modified boot sector on the HD. This is what thier recovery CD's look for. I don't believe that the E-Machines do anything like that at all. So you should be able to use a board that matches specs. Such as the actual ECS board with the standard BIOS. But if it does look to the BIOS for any reason you can transplant the BIOS chip or if not socketed you can always reflash the BIOS with the proper OEM BIOS.
 
Just to play devils advocate, business is business. Look at any OEM's cost for replacing components, its always higher (mostly a lot) then off the shelf. Older hardware can cost more as well, yadda yadda yadda. Look at all the OEM's doing customized components instead of industry standard. Not only does it allow them to cut costs, but it also forces average Joe user to have to buy from them to replace stuff. Seems to me to be a smart business strategy. Just because something can be had cheaper from another source doesn't mean someone is getting ripped off. I personally think emachines is cool for using standardized stuff.
 
I zero'ed his western digital drive and attempted another brand km266 mainboard (dfi) before i simply suggested an nvida board to match his new xp3200 cpu. the oem os restore cd's wouldn't allow even with a zero'ed drive (got rid of the emachines sector w/code). above poster is right about many oem pc's having a boot sector on the hd looking for oem stuff. some were on the hdd boot sector, but some are on the actual bios itself as proprietary - and he is right about the fact that you can still flash to a non-eom bios as well most of the time except in dell's case (only with the dell version of motherboard made by foxconn) but dell cases still have proprietary power supplies.

in this case, he really wanted to use the xp3200 and there was no way around it but to use another mainboard, and a new copy of xp. later emachines and even some hp's i have seen have the restore right on the hdd itself - you don't get restore disks. emachines now uses a 300w psu that's alot better than th previous models. i could have re-used his case but he liked the one on the sale rack that was open box and only $59.95. the psu alone would cost that much. good deal for him overall i think. he can then use this case to go 875p or a64 later on. the 350w psu should hold fine until an X800 or nvida 6800 enters the picture (possibly). his hdd worked great and was 7200 rpm wd model. he still has his old case - say's he may use it again and then use the antec for an a64 or 875p.
 
OldPueblo said:
Just to play devils advocate, business is business. I personally think emachines is cool for using standardized stuff.

i agree with you. emachines is much better than they used to be. and .. great laptops now. but owned by gateway now well see where they go from here.
 
Yeah hopefully they won't screw up the laptops before I can eventually get one. And you did the right thing by him in my opinion.
 
Back
Top