System problems...no video...stumped...

jag0

Limp Gawd
Joined
Aug 9, 2005
Messages
308
Alrighty guys...I'm stumped with this and I need some input. Here goes...

First off here are the system specs for the system:

  • Pentium 4 2.4Ghz (478) FSB800
  • 1GB DDR RAM (512 x 2)
  • WD SATA 120GB HDD
  • (Originally) Giga-byte GA-8IPE1000 Pro-G
  • (Replacement) Biostar P4M80-M4
  • Thermaltake Xaser III Silent Pure Power 480W PSU
  • DVD-Burner (IDE)
  • DVD-ROM (IDE)

Ok so a friend of mine called me and said that her computer went kaput...she said she was playing City of Heroes and then it just turned off. She also told me that she was hearing a funny noise coming from it and since I wasn't able to go down and see it...what she described sounded maybe like a bad power supply.

So when I went to do a quick inspection, the PSU would turn on fine. Now I should also note that she is on her SECOND Geforce 6800 (AGP) b/c her first one crapped out on her (it was an XFX-brand card btw.) It was replaced with a BIOSTAR Geforce 6800XT card which seemed to work fine until her machine crapped out.

However the strange part is that when I unplugged the 4-pin molex power adapter to it, the system would power up fine but I would have no video. I thought it was the motherboard so I had her purchase a new board (a BIOSTAR P4M80-M4) thinking that would be the source...but it wasn't. When I powered everything back up to start installing Windows, I had the same problem...but when I took the card out and used the on-board video it worked fine. When I put the video card back in but did NOT use the 4-pin molex power power adapter, the machine booted up but again no video.

So can anyone give me some ideas...I'm stumped on this one. I know the HDD is fine b/c I was able to back up here data and use Hiren's BootCD to check it. :confused:
 
I 've had that isue before. even though my solution is probably not your issue. Strangely enough, when i unplugged the Case power led from the motrboard, everything worked perfectly
 
That's an odd one...although considering that I am able to boot up the system when the card isn't installed I doubt that solution would work. Thanks though...I'll have to keep that one in mind for the future.
 
So let me get this straight... you unplugged the power from the vidcard, didnt get a display, and told her to buy a new mobo? :confused: while some cards will work without the extra power, I'm thinking that particular card did not, but I'm not sure. Anyhow, it sounds like a PSU issue. Did you try another PSU? If it works, return the newer board, lol. Thermaltake PSUs that arent from their Toughpower line are crap. Pickup an XClio 500W Goodpower from the egg, or even the XClio 450BL 450W. Both of those are made by CWT and have good cooling, so they're solid units. Don't buy crap PSUs. Theres a list of PSUs to avoid in the PSU subforum.
 
I had exact same problem.

It was the power supply. Not enough 5v rail Amps to power that video card. It might work for awhile but then crap out at random times, normally playing a game.

While that solved my 6800 GT problems, 3 months of trouble free service later the video card starting artifacting, and I needed to RMA it.

80% its the power supply
20% its the Video card

IMO

FYI

-Todd
 
Yeah it sounds like a power supply problem to me. Go with enginurd's suggestions and buy either XClio 450BL PSU or the XClio Goodpower 500W PSU.
 
/sigh/

I guess it might be the PSU...the reason why I thought it was the motherboard was b/c I had used the exact same board in another friends system I built and his crapped out. I replaced the board (& the CPU) and it's worked fine ever since...I replaced both it crapped out during lightening/thunder storm.

Oh well...I guess I'll have to take everything out and have her return the board to Newegg and buy a PSU.

As for Thermaltake PSU...I've used them for a while with no problems...heck I even have one in my system and it has worked beautifully.

Thanks guys...
 
The last Thermaltake 420w power supply I had was the one that didn't have enough 5v rail to power a 6800 GT consistently. As time goes on, the new video cards draw more and more power, and the shear wattage of the PSU doesnt really mean much. Look for 18-20 amp 5v rails. The thermaltake was 16.

FYI
 
Ok guys...so I swapper the power supply with one of those recommended (the XClio Goodpower 500W PSU) and I am still having the exact same problem which was:

- video card plugged in & 4-pin power molex...does not power up

- video card 4-pin power molex unplugged...system powers up but no video

- no video card installed...system powers up fine

The one problem tho is that this is a AGP system...so I guess I would have to buy a cheapo AGP card for tests.

Any ideas guys?
 
Ok try to assemble the PC outside of the Case to rule out a shorting problem. It may sound weird but might as well try that out before you go out and buy another AGP video card.
 
which board is this with? just curious. so i guess it is the agp card. if you want to sell that xclio, let me know, lol.
 
Is monitor connected to AGP card VGA or original mainboard (on board) VGA connector.

Did I read correctly that on board works but the AGP does not (appear) to work? Is there a bios setting for video from onboard (native) to AGP?
 
Ok to answer everyone's questions:

(1) The card she has was purchased in Nov 2006 and it is still covered by Newegg's Standard Replacement policy of 1 year. So I just need to request an RMA # and get a replacement (at no cost.) The cheapo AGP card I was going to buy was just for my own troubleshooting purposes for the future.

(2) The motherboard she has is the Gigabyte GA-8IPE1000 Pro-G (it's at the top of the thread...if you read it.) And no...she's going to keep the XClio plus even if she wasn't she could just return it for a refund. Sorry...:p

(3) Her original motherboard does not have on-board VGA, the replacement (which has already been returned to Newegg) had the on-board video. On both motherboards when the AGP card is plugged in without the required 4-pin power cable the system powers on but has no video output.

On the board that had the on-board video, the on-board video worked. I also went in and turned off the on-board video when I popped in the AGP slot...same result...no video.
 
(2) The motherboard she has is the Gigabyte GA-8IPE1000 Pro-G (it's at the top of the thread...if you read it.) And no...she's going to keep the XClio plus even if she wasn't she could just return it for a refund. Sorry...:p

I know its listed, but wasn't sure if you already returned the second board. Good idea to keep the XClio. And no, since you opened it, they would normally charge a restocking fee. Let us know how the replacement vidcard works out.
 
Sure thing.

...and the restocking fee would have only been like $7-8 (15%) so it wouldn't have been a huge loss.
 
Back
Top