switching to amd need advice

cell_491

2[H]4U
Joined
Oct 16, 2004
Messages
2,608
alright heres the deal i just fried my 3.4e so instead of replacing an aging socket 478 chip im thinking of moving to a socket 939 amd system. Im going to sell my BFG 6800gt OC agp and buy either the pci-e version or get an x800xl. I figured i might as well move to 64bit and pci-e so ill be ready for the next gen video cards and for longhorn (or xp 64bit). So heres my question i havent built an amd system since my old k6-II system (400mhz of awesomness) so what would be the absolute best mobo for overclocking keep in mind i will not be using sli or amr so 2 pci-e slots will not be used. Also i dont wont to spend more than $300 on the cpu
so what would you suggest? By the way i use ebay all the time so if you can recommend a product that would be easily found on ebay go ahead and recommend it :D im thinking of a a64 3200+ but im not sure wich cores oc better (arent there like different 3 cores for that chip) anyway let me know what you guys think
 
ok for the 3500+ what would make a better overclocker a clawhammer core or a newcastle because i just found a clawhammer for $285 buy it now (full retail :D )
 
Best option for OCing a s939 chip seems to be the DFI Ultra-D (since you don't need SLI). It runs around $140 or so.

I'd get a Winchester or wait for the Venice cores. Most 3000+, 3200+, 3500+ winchesters all reach "about" the same speeds, they just have different multipliers (x9, x10, x11 respectively).
 
im also considering an fx-51(939 version) can anyone tell me how they oc...i just saw a few go for about $300
 
I never saw a s939 FX-51. I've only seen the s939 FX-53. A $300 FX-53 is a pretty good deal. From what I've seen they are probably a little faster than the 3800+. Not sure about their OCing though.
 
the guy says its a socket 939...ill check up on it though. Im starting to lean towards the 3500+ clawhammer (its a good price), anywho...whats all this about a venice core? when is it scheduled to come out and whats so special about it.
 
hmm what im reading about the venice cores they seem like there gonna kickass! i might just buy a DFI ultra-D and then wait for the venice to be released.
 
For A64, there is no doubt in my mind that the way to go, from what I have read, is the socket 939, the DFI lanparty board and a PCI-E VGA. The DFI board has been reported to do some wicked overclocking and that setup is future-proof as well.
 
I don't think the 3500+ clawhammer is what you want. Get the winchester. It is the latest build (90nm vs the 130nm newcastle) and is an O/C's dream. $329 on Newegg http://www.newegg.com/app/SearchProductResult.asp?Submit=Go&DEPA=0

Don't wait though, the winchesters are really hard to find as they sell quickly. I'm running the newcastle and it is great, o/c's to nearly 2.4 easily but I've never pushed it past that. I know the winnies go a lot further. Forget the clawhammer, newcastles are prett good but the winnie is king.

Just read another thread that is all about clawhammer. Basically fx chips that failed some tests and are repackaged as 3500+. New to the market. Some O/C very well, some don't. Luck of the draw. Check the overclockers forum for better info than I am capable of giving.
 
cell_491 said:
hmm what im reading about the venice cores they seem like there gonna kickass! i might just buy a DFI ultra-D and then wait for the venice to be released.

Only problem is you might need to have some sort of 939 chip to flash the Ultra-D Bios to accept Venice cores. Same thing happened when Winchesters were released. I've also heard Venice is going to come out in only upper speeds (3800+ and above). So if you're looking at 3500+ or lower, Winchester is where it's at.
 
i just read were the 3000+ 3200+ 3500+ and 3800+ will be out by april 4th and the 4000+ and 4200+ will be out on the 15th. I'll just wait until the venice core comes out then purchase a mobo from directron and in the special request box ask them to flash it to the newest bios before shipping (directron is COOL like that)
 
Back
Top