Swapping PC parts, how does this system look.

3far4shot

Gawd
Joined
Nov 4, 2006
Messages
926
I am going to change the insides of my computer to a more high end system. I still need a motherboard, can someone please recommend me a good motherboard that is compatible with 45nm CPU's out of the box(like the E8400) and DDR2 memory. Heres the system so far:

Intel Core 2 Duo E8400:http://www.newegg.com/Product/Product.aspx?Item=N82E16819115037

Diamond 4870http://www.newegg.com/Product/Product.aspx?Item=N82E16814103061&Tpk=dimond%2b4870

Corsair 750Whttp://www.newegg.com/Product/Product.aspx?Item=N82E16817139006

WD Caviar HDDhttp://www.newegg.com/Product/Product.aspx?Item=N82E16822136073


I still dont know what mobo i want, i need it to be DDR2 and compatable with my OCZ Gold XTC RAM out of the box.
 
(You need to fix your links... they're not working properly.)

Here is a list of good motherboards that fit your needs:

Danny Bui said:
Gigabyte GA-EP43-DS3L Intel P43 Motherboard - $95
MSI P45 Neo3-FR Intel P45 Motherboard - $120
Gigabyte GA-EP45-DS3R Intel P45 Motherboard - $145
Asus P5Q Pro Intel P45 Motherboard - $150
DFI Lanparty DK X38-T2R Intel X38 Motherboard - $185
Gigabyte GA-X48-DS4 Intel X48 Motherboard - $225

Just to help you out: All of these motherboards have PCI-E 2.0 which may be useful for future GPU upgrades. If you don't need RAID, more than 6 SATA ports and only need semi-decent overclocking, check out the DS3L. If you need 8 SATA ports, RAID, 4 PCI slots, and legacy ports, then get the Neo3-Fr. If you don't need more than 6 SATA ports but want RAID, firewire, a second PCI-E x16 port, a second gigabit port, support for 16GB of RAM, optional eSATA, and high overclocks, then get the DS3R. If you like the DS3R but need 8 SATA ports, want an onboard pre-installed fast booting Linux setup or don't need a second gigabit port, get the Asus P5Q Pro. If you want Crossfire with full x16/x16 bandwidth, get the Lanparty DK X38. If you want a high-end motherboard for Crossfire (also with full x16/x16 bandwidth), get the X48-DS4.

You may also want to consider the VisionTek HD4870 instead of the Diamond model, as VisionTek is the only company (I know of) that offers a lifetime warranty on its AMD/ATI video cards.
 
it seems alright but you should really think about what and if you need some extras on these boards. i would look at tiraides' quote of danny bui as it pretty much covers it
 
it really would depend on what the op's doing as a fast dual core would be better if hes just gaming and the $20 could go towards a better cpu cooler and being newer tech doesnt hurt either :)
 
The P5Q-E is alright, though the P5Q Pro has most of the same features (but could only support 8GB of RAM instead of 16GB and is missing the third PCIe x16 slot that actually runs at PCIe x4 speed) for about $20 less (once you factor in shipping).

(Also, you still need to fix the links in your first post. The link in your most recent post works fine.)
 
Ok the above links should be working fine now(in my first post). I switched the PSU and am going with a Corsair 750W.
 
Stick with the E8400 and the P5Q Pro.

Do you have DDR2 RAM already? If so, which brand, amount, and speed?
 
I will probably pick up the Asus P5Q Pro, has lots of good reviews of newegg. And it should support the wolfdales out of the box right?. I also need to find a QVL to see if my RAM is compatible(the OCZ ones mentioned above) if not i will need to get new RAM.
 
The P5Q Pro will support every Core 2 Duo/Quad processor that is out right now. Since the E8400 has been out for a while now, you should have no problems running it right out of the box.

Here is the QVL for the P5Q Pro. Upon first glance, your OCZ RAM is supported by the motherboard.
 
Thanks alot, i still could find my RAM on it tho. In the DDR2 800 section the only two OCZ memory supported are the titanium series and platinum series.
 
You're not going to find every conceivable model of RAM on the average QVL. Since the P5Q Pro does support OCZ memory, you shouldn't have any problems with the RAM that you already have. As long as the RAM can run at JEDEC specifications (5-5-5-18 @ 800MHz with a 1.8v) you should be fine.
 
vista. its easier, safer, looks better, and directx10 support. well you could do dx10 with xp but thats annoying
 
Back
Top