ssd

biggston

Limp Gawd
Joined
Jan 4, 2012
Messages
252
Just bought an ssd: OCZ AGT3-25SAT3-120G Agility 3 120GB.
I am planing to install on it win7 64bit, its the first time i am going to use an ssd.
Is there anything i need to know about? Like configurations in win7, bios and all the latest things to protect and use properly my ssd.
I haven't been following things lately. :)

Thanks for your help in advance.
 
Last edited:
There's some good information in here

Also, I tend to move things off of the SSD that perform a lot of write cycles such as the browser cache, system and user appdata temp folders, etc.

Thanks for the info.
Does the performance drop allot over time?
 
Does the performance drop allot over time?

With TRIM in effect, no. Any degradation in performance is greatly minimized. Current SSDs are a world apart from the ones released even just a year ago. However, anything you can do to reduce write cycles on the SSD and/or prevent it from exceeding 70% capacity will help both longevity and performance, respectively.

You're gonna like SSDs. They've been the single most significant performance boost I've ever experienced :D
 
With TRIM in effect, no. Any degradation in performance is greatly minimized. Current SSDs are a world apart from the ones released even just a year ago. However, anything you can do to reduce write cycles on the SSD and/or prevent it from exceeding 70% capacity will help both longevity and performance, respectively.

You're gonna like SSDs. They've been the single most significant performance boost I've ever experienced :D

It should have a great boost on boot time and loading programs. :p
Yeah when SSDs first came out was a real pain in the ass. :D
So i have waited for the technology to mature a bit.
This one i ordered does have "Native TRIM support"
Thanks again for all the info.
 
You're gonna like SSDs. They've been the single most significant performance boost I've ever experienced :D

+1

few small things that can be a pain if you dont know off the back.

By default my ssd was setup as ahsci. This is fine but if you plan on running the ssd with Intel Smart Response Technology (acts as a cache for you big hdd), than you will have to change the ssd from "AHSCI" in bios to "RAID." Doing this after you install will cause instability so do it before you install your OS.

Here is intels sales pitch: http://www.intel.com/content/www/us/en/solid-state-drives/ssd-smart-response-video.html

Setup guide: http://download.intel.com/support/chipsets/sb/intel_smart_response_technology_user_guide.pdf
 
There's some good information in here

Also, I tend to move things off of the SSD that perform a lot of write cycles such as the browser cache, system and user appdata temp folders, etc.

Thats a waste of time and money imo (in the sense that you're not fully taking advantage the SSD you paid for). There's little to no reason to do any of that with today's SSD. Most of the stuff on that guide is also done automatically by Win7 save for the disabling the page file (also pointless) and disabling sys restore/hibernate (useful if you wanna save some space on a tiny SSD).

Honestly, SSD are pretty much plug and play these days... Unless you're dealing with a small one and you wanna save some space. Steam Mover is nice for moving games to and from the SSD without breaking installs (works with non-Steam games too).

Oh and this thread is on the wrong boards sub section.
 
Make sure C-states and power savings are turned off in BIOS (fixed cpu clock and overclock is very important for maximum 4K performance) and using high performance power plan in windows, with hard disk turn off set to never.


The other "tricks" are useless, and ain't worth the hassle at ALL.

Thanks for the info.
Does the performance drop allot over time?

Yes, but not to much, you should have bought M4 instead of Agility 3.

Also you should disable system restore to save like 10GB of storage.
 
Make sure C-states and power savings are turned off in BIOS (fixed cpu clock and overclock is very important for maximum 4K performance) and using high performance power plan in windows, with hard disk turn off set to never.


Yes, but not to much, you should have bought M4 instead of Agility 3.


To late now, i have already ordered it. :p
What's an "M4" ?
 
Thats a waste of time and money imo (in the sense that you're not fully taking advantage the SSD you paid for). There's little to no reason to do any of that with today's SSD. Most of the stuff on that guide is also done automatically by Win7 save for the disabling the page file (also pointless) and disabling sys restore/hibernate (useful if you wanna save some space on a tiny SSD).

Honestly, SSD are pretty much plug and play these days... Unless you're dealing with a small one and you wanna save some space. Steam Mover is nice for moving games to and from the SSD without breaking installs (works with non-Steam games too).

Oh and this thread is on the wrong boards sub section.

True i have also thought of that. What is the point of buying an ssd if you are going to turn most of the tasks to a hard disk? :D
I will just disable sys restore, hibernate and defragmentation. , I think it automatically disables the defragmenter anyway. And i will also check if "trim" is working on windows. I will just do automatic backups of windows on my 1TB hard disk in case something goes wrong. That's it!!
 
Sounds like a good plan. M4 is Crucial's SSD, there's nothing wrong with the Agility per se, Sandforce drives just got a bad rep over stability & compatibility issues (deservedly so), tho most of that appears to have been addressed. If you run into BSODs of any kind I'd exchange it immediately, otherwise it's a fine drive, one of the more resilient ones really as far as performance over time. (as an OS drive anyway)
 
Sounds like a good plan. M4 is Crucial's SSD, there's nothing wrong with the Agility per se, Sandforce drives just got a bad rep over stability & compatibility issues (deservedly so), tho most of that appears to have been addressed. If you run into BSODs of any kind I'd exchange it immediately, otherwise it's a fine drive, one of the more resilient ones really as far as performance over time. (as an OS drive anyway)

Did not know that about "Sandforce". There is a firmware update i think so i will update to the latest as soon as i receive the ssd and hope for the best. :p
Thanks for the tip, i might need it and ask for a replacement.
 
Version 2.15 firmware has fixed some bsod issues. There is also 2.22 firmware now which has more fixes but they did not make all of those fixes publicly known. But performance has increased also.
 
Back
Top