Ahoy,
My computer is being a turd and while I hope it's not my motherboard, I wanted to put my issue out there to see if anyone has had the same problem...
This doesn't happen every time, but sometimes when I go to boot my machine, it turns on but no signal is sent to the monitor. It just sits there blinking at me while my computer fails to do anything useful. Then, if I turn it off and leave it to think about things for a while and come back to try again later, it will usually boot but tell me the following:
"Warning, the previous performance of overclocking is failed and the system is restored to the default setting. Please press any key to continue..."
After pressing something it'll boot the rest of the way, but the picture in the monitor will flicker and scramble intermittently. Fun. Then, if I restart it again, it'll either restart normally or we'll go back to the first step of it not booting at all. It's strange though, because if it decides to work at this point, it will function flawlessly.
Are there any hardware diagnostic programs that you can recommend that would check my tower's innards for errors? Any ideas as to what may be the problem?
If it's helpful, my motherboard is as follows: MSI K8NGM2-FID mATX S939
GeForce 6150/6100 + nForce 430/410 Chipset based
If you need any more info, please let me know. If you couldn't tell already, I'm not exactly a computer specialist here but I can usually find my way around.
Thanks and I hope to hear from you soon
My computer is being a turd and while I hope it's not my motherboard, I wanted to put my issue out there to see if anyone has had the same problem...
This doesn't happen every time, but sometimes when I go to boot my machine, it turns on but no signal is sent to the monitor. It just sits there blinking at me while my computer fails to do anything useful. Then, if I turn it off and leave it to think about things for a while and come back to try again later, it will usually boot but tell me the following:
"Warning, the previous performance of overclocking is failed and the system is restored to the default setting. Please press any key to continue..."
After pressing something it'll boot the rest of the way, but the picture in the monitor will flicker and scramble intermittently. Fun. Then, if I restart it again, it'll either restart normally or we'll go back to the first step of it not booting at all. It's strange though, because if it decides to work at this point, it will function flawlessly.
Are there any hardware diagnostic programs that you can recommend that would check my tower's innards for errors? Any ideas as to what may be the problem?
If it's helpful, my motherboard is as follows: MSI K8NGM2-FID mATX S939
GeForce 6150/6100 + nForce 430/410 Chipset based
If you need any more info, please let me know. If you couldn't tell already, I'm not exactly a computer specialist here but I can usually find my way around.
Thanks and I hope to hear from you soon