Speedfan readings for a new PC.

mis3

Gawd
Joined
Jul 4, 2000
Messages
827
Just set up a new PC; these are my SpeedFan readings:

OC: FSB=300, CPU@2.7GHz.
Running Prime95 in Core1.

System=33c
CPU=44c
AUX=127c
HD0=32c
Core 0=54c
Core 1=55c
Core 2=44c
Core 3=44c
Core=57c

Are these temperatures OK?

My PC: P5E-WS, Q6600-Q0, Freezer 7 Pro, P182.
 
Speedfan is ick, even if it is a newer version.
I suggest using Coretemp 0.96 for its ease of use and small size.

Before I say anything about your temps, I want to see them from up to date core temp and NOT speedfan.

Oh, also, make sure prime95 is running threads in each core, the newest version should do this..
 
Current QC: 291 MHZ, CPU=2.62 GHz.
I downloaded Core Temp Beta 0.9.0.91 and these are the readings.

With Q-Fan turned on with Perfromance Profile:

Idle: TCaseMax=100c, Core1=37, Core2=37, Core3=35, Core4=35
With Prime95 running on Core4:
Fully loaded on Core4: TCaseMax=100c, Core1=48, Core2=48, Core3=52, Core4=52


I turned off Q-Fan, CPU fan=100% at 2657 RPM

Idle: TCaseMax=100c, Core1=36, Core2=36, Core3=35, Core4=35
With Prime95 running on Core4:
Fully loaded on Core4: TCaseMax=100c, Core1=42, Core2=42, Core3=46, Core4=46


Then I used SpeedFan to lower the CPU fan to 60% at 1731 RPM:

Idle: TcaseMax=100c, Core1=38c, Core2=38, Core3=36, Core4=36
With Prime95 running on Core4:
Fully loaded on Core4: TCaseMax=100c, Core1=44, Core2=44, Core3=49, Core4=49

I am using Prime95 V24.14. It seems that I cannot run multiple instances of this application so I just chose Core4.
 
Those idle temps look fine considering the OC and the AF7 Pro heatsink. Not sure why you cannot load all 4 cores, use taskmanager to set the CPU affinity might be one solution.

or

Open two instances of ORTHOS. ORTHOS0 - limit cpu affinity to CPU0 and CPU1. ORTHOS1 - limit cpu affinity to CPU2 and CPU3.

That AF7 is not optimum for a high OC of a quad but it seems to be doing fine, just realize it cannot perform as well as one of the big tower coolers with a 120mm fan. It seems like your installation is fine.
 
I downloaded Prime95-V25.5 and I can now run it in all 4 cores.
Current OC: 291 MHZ, CPU=2.62 GHz.

With Q-Fan enabled and Prime95 running on all 4 cores, the Core Temp readings were:
58-61 for Core1 and Core2
55-57 for Core3 and Core4
According to PC-Probe-2, CPU=49c, CPU fan=2033 RPM, CPU Usage=100%

Q-Fan is working out nicely for me. The PC would boot with CPU fan at 1000 RPM and increases gradually as required beased on the CPU temperature.

Questions:
1. Are these temperatures still OK?
2. Both SpeedFan and PC Probe-2 reported the CPU temp was 49 abd it is 10-12c below what Core Temp reported for each core. Why?
 
Back
Top