Yesterday I got a chance to test the overlcock potential of my newly built SP35P2 system.
Conroe E6750 @ 3.8Ghz (voltage set to auto in the bios)
OCZ Platnium DDRII 800 @ 950 CL4 (voltage set to 2.275 in the bios)
Seagate 500GB
Seagate 320GB
XFX Geforce 8800 GTX XXX Edition (670mhz default clock)
Creative X-FI Extreme Audio
LG 20" LCD Monitor (Wide Screen)
For now I have only increased the voltage for my OCZ memory. You can see that from the Sandra results the memory performance is pretty good.
http://premium1.uploadit.org/ManojM//3.8Ghz.JPG
Will test more later. Trying to see if I could clock the CPU higher if I increase the CPU voltage.
For everyday use I have set the CPU to 3.6Ghz at default voltage which runs the memory at 900mhz at 2.05V.
I have put the OCZ cooler on top of the rams for better cooling.
Conroe E6750 @ 3.8Ghz (voltage set to auto in the bios)
OCZ Platnium DDRII 800 @ 950 CL4 (voltage set to 2.275 in the bios)
Seagate 500GB
Seagate 320GB
XFX Geforce 8800 GTX XXX Edition (670mhz default clock)
Creative X-FI Extreme Audio
LG 20" LCD Monitor (Wide Screen)
For now I have only increased the voltage for my OCZ memory. You can see that from the Sandra results the memory performance is pretty good.
http://premium1.uploadit.org/ManojM//3.8Ghz.JPG
Will test more later. Trying to see if I could clock the CPU higher if I increase the CPU voltage.
For everyday use I have set the CPU to 3.6Ghz at default voltage which runs the memory at 900mhz at 2.05V.
I have put the OCZ cooler on top of the rams for better cooling.