Sorry another suggestions thread

eLus1ve

Limp Gawd
Joined
Jan 19, 2004
Messages
294
I've made a wishlist based off solely on newegg reviews, and I'm wondering which parts I can replace that will perform relatively similar but at a lower cost. My wishlist:

https://secure.newegg.com/NewVersio...p?WishListNumber=4771771&WishListTitle=798456

I already have my case(Antec 900) and my slave HD(WD 500GB.) It'll be also nice if someone can point out any part(s) that will have incompatibility issues with each other. In addition, I chose the most popular 8800GTS card because I will most likely adding a 2nd card in the future. I didn't wanna go with the fancy "8800GTS SUPEROVERCLOCKED VERSION" because I'm afraid it won't exist by the time I try to purchase a 2nd one for SLI. Thanks in advance.

Also, the wishlist is actually $135 cheaper than the total cost if you add up all the MIR.

EDIT: Although I want to drop my total costs by a couple hundred dollars, I don't mind if I have to spend a few extra dollars on some part(s) if it's worth the performance for a few extra dollars.
 
How big is your monitor?

Oh and you can get that Corsair PSU for $45 cheaper with free shipping at Zipzoomfly.com:
Corsair 620HX 620W PSU - $145

Don't bother going with Dominator RAM. They're not worth it. And since you're going with the E6600, you can actually go with lower quality/performance RAM. If you can find them in stock anywhere, buy a 2x1GB Kit of Buffalo Firestix RAM. They're very decent overclockers because of the Micro ICs that they have. Hell you can get some decent overclocks with this set of relatively cheap RAM:

G.SKILL F2-6400CL5D-2GBNQ 2 x 1GB 240-Pin DDR2 800 RAM - $105

People have gotten about 430Mhz to 450Mhz with that set of RAM. So even if you can only reach 430Mhz, you'll get and overclock of 9 x 430 = 3.8ghz or so.

Ditch that IDE DVD-RW drive and go with a SATA DVD-RW drive for slightl faster speeds and easier wire management.
 
Get the PSU from zipzoomflyinstead, and save a bunch: http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=373110

Don't bother with the dominator ram and an E6600. No point in that overpriced kit for a CPU with a high multiplier. The G.Skill 2GBNQ kit will suffice. If you want better timings, the 2GBPK kit should be a bit more. If you can find the Buffalo Firestix for 120 in stock, go for them.

Also, don't bother with the 7700 Zalman... go for the Scythe Ninja Plus Rev.B instead, or the Tuniq Tower or Ultra 120 if you can find them in stock. The Scythe Inifnity is also good, along with the Zalman 9X00s.

Do you really need SLI? What size monitor will you be gaming on?

//edit: Danny beat me to the reply, lol. I agree, go with a SATA burner.
 
I have a 19' BenQ monitor.

Should I drop my current mobo for the P5W? It says the FSB run at 1333/1066MHz, unless it can still run at 800Mhz fine because I hope to upgrade a 1066Mhz+ in the future.(If it's even necessary at the time)
 
I have a 19' BenQ monitor.

Should I drop my current mobo for the P5W? It says the FSB run at 1333/1066MHz, unless it can still run at 800Mhz fine because I hope to upgrade a 1066Mhz+ in the future.(If it's even necessary at the time)

You dont need SLI for a 19" monitor.

You want to drop the high end SLI board for a high end Crossfire board? They can both run at those FSB speeds. 800Mhz? Are you talking about RAM or CPU? Because the E6600 has an FSB of 1066Mhz (stock), but the E4300 has an FSB of 800Mhz (stock). DDR2-800 is 400Mhz base FSB speed times 2.
 
You dont need SLI for a 19" monitor.

You want to drop the high end SLI board for a high end Crossfire board? They can both run at those FSB speeds. 800Mhz? Are you talking about RAM or CPU? Because the E6600 has an FSB of 1066Mhz (stock), but the E4300 has an FSB of 800Mhz (stock). DDR2-800 is 400Mhz base FSB speed times 2.

I'm sorry, I mean the board's "memory standard" is 1200, so I'm wondering if I should just downgrade my mobo or upgrade my ram to a 1200.

EDIT: Wishlist updated
 
I'm sorry, I mean the board's "memory standard" is 1200, so I'm wondering if I should just downgrade my mobo or upgrade my ram to a 1200.

EDIT: Wishlist updated

The "memory standard" field on the newegg product page is irrelevant. Check the manufacturers product page to find out which memory speeds are supported. Most current chipset gen boards support 533/667/800+, so you'll be fine with DDR2-800.

Do you plan on getting a larger monitor in the future? If not, don't bother with the 680i SLI chipset. Go for the P965 Express chipset instead, like the DS3 or P5B-E. If you're on the fence about SLI, check out the 650i solutions instead. Current games/cards can't even saturate dual 8x SLI bandwidth, let alone dual 16x.
 
Well I will eventually upgrade to at least a 24' in the future, maybe even far as 34'.
 
Well I will eventually upgrade to at least a 24' in the future, maybe even far as 34'.

hahahahaA? you mean

24" right? 24' is twenty-four feet.

that would be a biiiiiigg monitor :)


Latest wishlist comp lookin good. I really dont have any suggestions; it will be smokin fast.
 
No. you't see any real performance increase with that kind of RAM. So don't buy it.
 
Back
Top